Additional Detail Clause Samples

The "Additional Detail" clause serves to provide further information or clarification regarding specific terms, obligations, or procedures within a contract. This clause may be used to elaborate on particular requirements, outline supplementary steps, or specify exceptions that are not fully addressed elsewhere in the agreement. By including such details, the clause ensures that all parties have a clear and comprehensive understanding of their responsibilities, thereby reducing the risk of misunderstandings or disputes.
Additional Detail. (1) The GIS Enclosure and Control building is a steel structure with metal decking and siding, located on a foundation stabilized by auger cast piles 50 feet in depth. The structure is 125 ft x 110 ft, containing rooms for the DC batteries (1st and 2nd line), DC rectifier rooms (1st and 2nd line), Relay Protection Panel rooms (1st and 2nd line), Communications room (1st and 2nd line), Security room, RTU rooms, main control room and L&P room (1st and 2nd line). The L&P transformers are dry type, 750kVA, delta-wye connection; 27kV primary side and 208/120V 3phase, with 3 phase grounding switch on the primary side. (2) A 750 kcmil grounding grid is to be installed under the building and continues outside into the main substation yard. (3) The 345kV GIS consists of a four (4) circuit breakers ring bus (with the ability to expand to a five (5) circuit breaker ring bus), SF6 type, 63kA rating, 362 kV, 3000Amps. The G13 feeder is terminated between circuit breakers 1 and 2, the Q35L feeder is terminated between circuit breakers 1 and 3, the spare feeder is terminated between circuit breakers 3 and 5, and the Q35M feeder is terminated between circuit breakers 2 and 5. The GIS is expandable if a future developer were to install breaker 4 along with the requisite modifications to the existing bus section. In addition, there are a total of twelve (12) 3,000Amp motor operated disconnect switches: eight
View SourceView Similar (18)
Additional Detail. (1) These facilities include three (3) ABB Gas/Air bushings, Porcelain, 362kV, which are located outside the Astoria Annex Substation on foundations. The GIS bus, supported by structural steel, then extends and travels into the new GIS Building, where the bus is connected to one (1) ABB 3 phase, 63kA, 362kV, SF6 GIS motor operated disconnect switch and two (2) ABB 3 phase, 63kA, 363kV, SF6 GIS grounding switches. (2) Within this section of the GIS, there is one (1) ABB 3 phase, ring core CT, revenue metering, rating 0.15S-B01-1.8, 362kV, 1000:5, single ratio and one (1) ABB 3 phase, metering PT, rating 1800/3000:1 / 0.3Z – 0.6ZZ, 3 secondary windings. (3) Also located within this section of the GIS is one (1) ABB 3 phase, relay protection CT, rating C800, 362kV, 3000:5, multi ratio. The protection CT is part of the G13 feeder relay protection system.
View SourceView Similar (11)
Additional Detail. (1) GSU’s: Electrical power from two (2) combustion turbine generators is fed through two (2) Fortune Electric Co., Ltd. three phase, 18/355kV delta-wye, GSU transformers rated 129/172/215 MVA (ONAN/ONAF/ONAF) with impedance 8.5%@129MVA and from one (1) steam turbine generator through one (1) Fortune Electric Co., Ltd. three phase, 18/355kV delta-wye, GSU transformer rated 192/256/320 MVA (ONAN/ONAF/ONAF) with impedance 8.5%@192MVA. Each GSU is pad mounted on its own foundation, which includes an oil containment system. (2) GSU’s to GIS: At the GSU primary side, there are nine (9) Nexans’ connectors, Outdoor Sealing End, Type SOA 1.420, for XPLE 800sqmm Al cable, which connect to Nexans, 345kV, 800sqmm Al XLPE Solid Dielectric High Voltage Power Cable, 3,090 total linear ft in total (for all nine phases), which, in turn connect to the nine (9) Nexans’ connectors, GIS Sealing End, Type SFYL 1.420, for XLPE 800sqmm Al cable at the GIS.
View SourceView Similar (11)
Additional Detail. These facilities include three (3) ABB Gas/Air bushings, Porcelain, 362kV, which are located outside the Astoria Annex Substation on foundations. The GIS bus, supported by structural steel, then extends and travels into the new GIS Building, where the bus is connected to one (1) ABB 3 phase, 63kA, 362kV, SF6 GIS motor operated disconnect switch and two (2) ABB 3 phase, 63kA, 363kV, SF6 GIS grounding switches. Within this section of the GIS, there is one (1) ABB 3 phase, ring core CT, revenue metering, rating 0.15S-B01-1.8, 362kV, 1000:5, single ratio and one (1) ABB 3 phase, metering PT, rating 1800/3000:1 / 0.3Z – 0.6ZZ, 3 secondary windings. Also located within this section of the GIS is one (1) ABB 3 phase, relay protection CT, rating C800, 362kV, 3000:5, multi ratio. The protection CT is part of the G13 feeder relay protection system. Developer shall design, engineer, procure and construct Connecting Transmission Owner’s Attachment Facilities in accordance with the applicable requirements and standards of Consolidated Edison Company of New York, Inc. (“Affected Transmission Owner”) agreed to and provided by Affected Transmission Owner to Connecting Transmission Owner and Developer, as set out in the construction work packages approved by the Affected Transmission Owner and Connecting Transmission Owner, to the extent not inconsistent with the terms of this Agreement or the NYISO OATT. Connecting Transmission Owner shall promptly review, comment on, and approve Developer’s design, engineering, and construction work plans for the construction of the Connecting Transmission Owner’s Attachment Facilities. Connecting Transmission Owner shall, at the Operational Transfer Date (as described in Appendix B), be responsible for compliance with any applicable requirements of the North American Electric Reliability Corporation (“NERC”) with respect to the Connecting Transmission Owner’s Attachment Facilities. Developer shall, prior to the Operational Transfer Date, provide Connecting Transmission Owner with all documentation reasonably required and requested by Connecting Transmission Owner to comply with any applicable NERC requirements.
View SourceView Similar (7)
Additional Detail. 12.1. All Reseller need to provide photo copy of original Company SSM, Business license for Verification.
View Source
Additional Detail. If an attendee has a special request or needs additional support for this workshop, please reach out to ▇▇▇▇▇▇▇.▇▇▇▇▇▇@▇▇▇.▇▇▇.
View Source
Additional Detail. 12.1. All Sale Agent need to provide photo copy of original IC front and back. And facebook account link (personal account) for Verification.
View Source

Related to Additional Detail

  • Additional Disclosures The Sweepstakes is in no way sponsored, endorsed or administered by, or associated with Facebook, Twitter, Instagram, or any other social media platform. Each Entrant releases Facebook, Twitter, Instagram, and all other social media platforms mentioned in these Official Rules from any claims, responsibility or liability relating to their participation in this Sweepstakes. Copyright/trademark/service mark infringements are not intended or implied.

  • Additional Financial Information The Company shall provide Parent with the Company’s audited financial statements for the twelve month periods ended December 31, 2022 and 2021 consisting of the audited consolidated balance sheets as of such dates, the audited consolidated income statements for the twelve month period ended on such date, and the audited consolidated cash flow statements for the twelve month period ended on such date (the “Year End Financials”). Subsequent to the delivery of the Year End Financials, the Company’s consolidated interim financial information for each quarterly period thereafter shall be delivered to Parent no later than forty (40) calendar days following the end of each quarterly period and consolidated interim monthly information for each month thereafter shall be delivered to Purchaser no later than 20 days following the end of each month (the “Required Financial Statements”). All of the financial statements to be delivered pursuant to this Section 7.3, shall be prepared under U.S. GAAP in accordance with requirements of the PCAOB for public companies. The Required Financial Statements shall be accompanied by a certificate of the Chief Executive Officer of the Company to the effect that all such financial statements fairly present the financial position and results of operations of the Company as of the date or for the periods indicated, in accordance with U.S. GAAP, except as otherwise indicated in such statements and subject to year-end audit adjustments. The Company will promptly provide with additional Company financial information reasonably requested by Parent for inclusion in the Proxy Statement and any other filings to be made by Parent with the SEC.

  • Additional Documentation Execute and deliver, or cause to be executed and delivered, any and all other agreements, instruments or documents which Lender may reasonably request in order to give effect to the transactions contemplated under this Loan Agreement and the other Loan Documents.

  • Acknowledgement and Consent to Bail-In of EEAAffected Financial Institutions Notwithstanding anything to the contrary in any Loan Document or in any other agreement, arrangement or understanding among any such parties, each party hereto acknowledges that any liability of any EEAAffected Financial Institution arising under any Loan Document may be subject to the Write-Down and Conversion Powers of an EEAthe applicable Resolution Authority and agrees and consents to, and acknowledges and agrees to be bound by: (a) the application of any Write-Down and Conversion Powers by an EEAthe applicable Resolution Authority to any such liabilities arising hereunder which may be payable to it by any party hereto that is an EEAAffected Financial Institution; and (b) the effects of any Bail-In Action on any such liability, including, if applicable: (i) a reduction in full or in part or cancellation of any such liability; (ii) a conversion of all, or a portion of, such liability into shares or other instruments of ownership in such EEAAffected Financial Institution, its parent entity, or a bridge institution that may be issued to it or otherwise conferred on it, and that such shares or other instruments of ownership will be accepted by it in lieu of any rights with respect to any such liability under this Agreement or any other Loan Document; or (iii) the variation of the terms of such liability in connection with the exercise of the Write-Down and Conversion Powers of any EEAthe applicable Resolution Authority.

  • Additional Definition Section 1.02 of the Credit Agreement is hereby amended to add thereto in alphabetical order the following definition which shall read in full as follows: