Adjacent Collocation Sample Clauses
The Adjacent Collocation clause defines the requirement that certain equipment, facilities, or structures must be located next to or in close proximity to each other. In practice, this clause may specify that a tenant’s equipment must be installed directly adjacent to a landlord’s infrastructure, or that two related systems must be sited side by side to ensure operational efficiency. Its core function is to ensure optimal connectivity, minimize installation costs, and facilitate maintenance by mandating physical proximity between related assets.
POPULAR SAMPLE Copied 1 times
Adjacent Collocation. If and only if there is no Unused Space for Physical Collocation, Requesting Carrier may submit to Ameritech an NSCR that requests Ameritech to provide Requesting Carrier Adjacent Collocation to the extent technically feasible. As used in this Agreement, “Adjacent Collocation” shall mean Collocation on Ameritech’s property in adjacent controlled environmental vaults or similar structures (collectively, an “Adjacent Structure”). Ameritech shall only be required to provide Adjacent Collocation if technically feasible, and subject to reasonable safety and maintenance requirements, zoning and other state and local regulations. Ameritech shall provide power and Physical Collocation services and facilities in and to Adjacent Structures subject to the same nondiscrimination requirements as traditional Collocation arrangements. Requesting Carrier shall be responsible for securing all required licenses and permits, the required site preparations and shall further retain responsibility for securing and/or constructing the Adjacent Structure and any building and site maintenance associated with the placement of such Adjacent Structure. Subject to zoning and safety requirements, and provided Ameritech owns or controls the property in question, Ameritech reserves the right to assign the location of the Adjacent Structure. Ameritech shall have no obligation to consider or process an NSCR for Adjacent Collocation until Requesting Carrier has secured and provided Ameritech evidence of final approval for the requested Adjacent Structure (and any transmission and power connections) from (i) any applicable local governmental or other authority having jurisdiction to approve or grant zoning compliance or waivers and (ii) if the land on which Requesting Carrier seeks to locate such Adjacent Structure is not owned by Ameritech, such owner or landlord. Requesting Carrier shall not place any signage or marking of any kind on a Adjacent Structure or on the Ameritech grounds surrounding the Adjacent Structure. If space becomes available in Ameritech’s Premises, and Requesting Carrier elects to order Collocation in such Premises in lieu of its Adjacent Collocation, then Requesting Carrier shall remove its Adjacent Structure at its expense no later than sixty (60) days after Requesting Carrier’s “replacement” Collocation within Ameritech’s Premises becomes operational.
Adjacent Collocation. 3.4.1 Subject to technical feasibility and space availability, BellSouth will permit an adjacent collocation arrangement (Adjacent Arrangement) on BellSouth Premises’ property only when space within the requested BellSouth Premises is legitimately exhausted and where the Adjacent Arrangement does not interfere with access to existing or planned structures or facilities on the BellSouth Premises’ property. An Adjacent Arrangement shall be constructed or procured by ACCESS Integrated or ACCESS Integrated’s BellSouth Certified Supplier and must be in conformance with the provisions of BellSouth’s design and construction specifications. Further, ACCESS Integrated shall construct, procure, maintain and operate said Adjacent Arrangement pursuant to all of the applicable rates, terms and conditions set forth in this Attachment.
3.4.2 If ACCESS Integrated requests Adjacent Collocation, pursuant to the conditions stated in Section 3.4 above, ACCESS Integrated must arrange with a BellSouth Certified Supplier to construct or procure the Adjacent Arrangement structure in accordance with BellSouth’s specifications. BellSouth will provide the appropriate specifications upon request. Where local building codes require specifications more stringent than BellSouth’s own specifications, ACCESS Integrated and ACCESS Integrated’s BellSouth Certified Supplier shall comply with the more stringent local building code requirements. ACCESS Integrated’s BellSouth Certified Supplier shall be responsible for filing and obtaining any and all necessary zoning, permits and/or licenses for such construction. ACCESS Integrated’s BellSouth Certified Supplier shall ▇▇▇▇ ACCESS Integrated directly for all work performed for ACCESS Integrated to comply with this Attachment. BellSouth shall have no liability for, nor responsibility to pay, such charges imposed by ACCESS Integrated’s BellSouth Certified Supplier. ACCESS Integrated must provide the local BellSouth Central Office Building Contact with two (2) cards, keys or other access devices used to gain entry into the locked enclosure. Except in the case of an emergency, BellSouth will not access ACCESS Integrated’s locked enclosure prior to notifying ACCESS Integrated at least forty-eight (48) hours or two (2) business days, whichever is greater, before access to the Collocation Space is required.
3.4.3 ACCESS Integrated must submit its Adjacent Arrangement construction plans and specifications to BellSouth when it places its Firm Order. Bel...
Adjacent Collocation. Subject to technical feasibility and space availability, BellSouth will provide approval for adjacent Remote Site collocation arrangements (“Remote Site Adjacent Arrangement”) where space within the Remote Site Location is legitimately exhausted, where the Remote Site Adjacent Arrangement does not interfere with access to existing or planned structures or facilities on the Remote Site Location property. The Remote Site Adjacent Arrangement shall be constructed or procured by WebShoppe and in conformance with BellSouth’s design and construction specifications. Further, WebShoppe shall construct, procure, maintain and operate said Remote Site Adjacent Arrangement(s) pursuant to all of the terms and conditions set forth in this Attachment. Rates shall be negotiated at the time of the request for the Remote Site Adjacent Arrangement.
3.4.1 Should WebShoppe elect such an option, WebShoppe must arrange with a BellSouth Certified Contractor to construct a Remote Site Adjacent Arrangement structure in accordance with BellSouth’s guidelines and specifications. BellSouth will provide guidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard specification, WebShoppe and WebShoppe’s BellSouth Certified Contractor must comply with local building code requirements. WebShoppe’s BellSouth Certified Contractor shall be responsible for filing and receiving any and all necessary zoning, permits and/or licenses for such construction. WebShoppe’s BellSouth Certified Contractor shall ▇▇▇▇ WebShoppe directly for all work performed for WebShoppe pursuant to this Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by the BellSouth Certified Contractor. WebShoppe must provide the local BellSouth Remote Site Location contact with two cards, keys or other access device used to enter the locked enclosure. Except in cases of emergency, BellSouth shall not access WebShoppe’s locked enclosure prior to notifying WebShoppe.
3.4.2 BellSouth maintains the right to review WebShoppe’s plans and specifications prior to construction of a Remote Site Adjacent Arrangement(s). BellSouth shall complete its review within fifteen (15) calendar days. BellSouth may inspect the Remote Site Adjacent Arrangement(s) following construction and prior to the Commencement Date, as defined in Section 4 following, to ensure the design and construction comply with BellSouth’s guide...
Adjacent Collocation. BellSouth will provide adjacent collocation arrangements (“Adjacent Arrangement”) where space within the Central Office is legitimately exhausted, subject to technical feasibility, where the Adjacent Arrangement does not interfere with access to existing or planned structures or facilities on the Central Office property and where permitted by zoning and other applicable state and local regulations. The Adjacent Arrangement shall be constructed or procured by OptiLink and in conformance with BellSouth’s design and construction specifications. Further, OptiLink shall construct, procure, maintain and operate said Adjacent Arrangement(s) pursuant to all of the terms and conditions set forth in this Attachment. Rates shall be negotiated at the time of the request for Adjacent Collocation.
3.4.1 Should OptiLink elect such option, OptiLink must arrange with a BellSouth certified contractor to construct an Adjacent Arrangement structure in accordance with BellSouth’s guidelines and specifications. BellSouth will provide guidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard specification, OptiLink and OptiLink’s contractor must comply with local building code requirements. OptiLink’s contractor shall be responsible for filing and receiving any and all necessary zoning, permits and/or licenses for such construction. OptiLink’s BellSouth Certified Vendor shall ▇▇▇▇ OptiLink directly for all work performed for OptiLink pursuant to this Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by the Certified Vendor. OptiLink must provide the local BellSouth building contact with two cards, keys or other access device used to enter the locked enclosure. Except in cases of emergency, BellSouth shall not access OptiLink’s locked enclosure prior to notifying OptiLink.
3.4.2 BellSouth maintains the right to review OptiLink’s plans and specifications prior to construction of an Adjacent Arrangement(s). BellSouth may inspect the Adjacent Arrangement(s) following construction and prior to commencement, as defined in Section 4.1 following, to ensure the design and construction comply with BellSouth’s guidelines and specifications. BellSouth may require OptiLink, at OptiLink’s sole cost, to correct any deviations from BellSouth’s guidelines and specifications found during such inspection(s), up to and including removal of the Adjacent Arrangement...
Adjacent Collocation. BellSouth will provide approval for adjacent Remote Site collocation arrangements (“Remote Site Adjacent Arrangement”) where space within the Remote Site Location is legitimately exhausted, subject to technical feasibility, where the Remote Site Adjacent Arrangement does not interfere with access to existing or planned structures or facilities on the Remote Site Location property and where permitted by zoning and other applicable state and local regulations. The Remote Site Adjacent Arrangement shall be constructed or procured by MTS Communications and in conformance with BellSouth’s design and construction specifications. Further, MTS Communications shall construct, procure, maintain and operate said Remote Site Adjacent Arrangement(s) pursuant to all of the terms and conditions set forth in this Attachment. Rates shall be negotiated at the time of the request for the Remote Site Adjacent Arrangement.
Adjacent Collocation. CLEC is responsible for the maintenance and repair of its equipment located within CLEC’s Adjacent Collocation and Adjacent Remote Collocation space.
Adjacent Collocation. Subject to technical feasibility and space availability, BellSouth will permit an adjacent collocation arrangement (Adjacent Arrangement) on BellSouth Premises’ property only when space within the requested BellSouth Premises is legitimately exhausted and where the Adjacent Arrangement does not interfere with access to existing or planned structures or facilities on the BellSouth Premises’ property. An Adjacent Arrangement shall be constructed or procured by ComSouth or ComSouth’s BellSouth Certified Supplier and must be in conformance with the provisions of BellSouth’s design and construction specifications. Further, ComSouth shall construct, procure, maintain and operate said Adjacent Arrangement pursuant to all of the applicable rates, terms and conditions set forth in this Attachment.
Adjacent Collocation. Sprint will provide adjacent collocation arrangements (“Adjacent Arrangement”) where space within the Premises is legitimately exhausted, subject to technical feasibility. Both Parties will mutually agree on the location of the designated space on the Sprint property where the adjacent structure (such as a CEV or similar structure) will be placed. The Parties, if a mutual agreement cannot be reached, Sprint will decide the location, subject to zoning or other state and local regulations and planned use by the Parties for telecommunications infrastructure.
32.4.1. CLEC will provide a concrete pad, the structure housing the arrangement, HVAC, lighting, and all facilities that connect the structure (i.e. racking, conduits, etc.) to the Sprint point of interconnection. Should CLEC elect such an option, CLEC must arrange with a third party vendor to construct an Adjacent Arrangement structure in accordance with this Agreement.
32.4.2. Sprint maintains the right to review CLEC’s plans and specifications prior to construction of an Adjacent Arrangement(s). Sprint will complete its review within thirty (30) calendar days of site selection and receipt of plans. Except that such time period may be extended if any delay is due to the actions of CLEC. Sprint may inspect the Adjacent Arrangement(s) following construction and prior to commencement to ensure the design and construction comply with submitted plans. Sprint may require CLEC to correct any deviations from approved plans found during such inspection(s).
32.4.3. Sprint will provide AC power, as requested, subject to being technically feasible. At its option, CLEC may choose to provide its own AC power to the adjacent structure as long as the AC power source is from the same provider as Sprint’s.
32.4.4. Subject to CLEC being on the waiting list, in the event that space in a Sprint Premises becomes available, Sprint will provide the option to the CLEC to relocate its equipment from an Adjacent Facility into the Sprint Premises. In the event CLEC chooses to relocate its equipment, appropriate charges will apply, including charges to vacate the adjacent collocation arrangement and charges applicable for collocation within the Sprint Premises.
Adjacent Collocation. 3.4.1 Subject to technical feasibility and space availability, AT&T will permit an adjacent collocation arrangement (Adjacent Arrangement) on AT&T Premises’ property only when space within the requested AT&T Premises is legitimately exhausted and where the Adjacent Arrangement does not interfere with access to existing or planned structures or facilities on the AT&T Premises’ property. An Adjacent Arrangement shall be constructed or procured by CLEC or CLEC’s AT&T Certified Supplier and must be in conformance with the provisions of AT&T’s design and construction specifications. Further, CLEC shall construct, procure, maintain and operate said Adjacent Arrangement pursuant to all of the applicable rates, terms and conditions set forth in this Appendix.
3.4.2 If CLEC requests Adjacent Collocation, pursuant to the conditions stated in Section 3.4 above, CLEC must arrange with an AT&T Certified Supplier to construct or procure the Adjacent Arrangement structure in accordance with AT&T’s specifications. AT&T will provide the appropriate specifications upon request. Where local building codes require specifications more stringent than AT&T’s own specifications, CLEC and CLEC’s AT&T Certified Supplier shall comply with the more stringent local building code requirements. CLEC’s AT&T Certified Supplier shall be responsible for filing and obtaining any and all necessary zoning, permits and/or licenses for such construction. CLEC’s AT&T Certified Supplier shall ▇▇▇▇ ▇▇▇▇ directly for all work performed for CLEC to comply with this Appendix. AT&T shall have no liability for, nor responsibility to pay such charges imposed by CLEC’s AT&T Certified Supplier. CLEC must provide the local AT&T contact with two (2) cards, keys or other access devices used to gain entry into the locked enclosure. Except in the case of an emergency, AT&T will not access CLEC’s locked enclosure prior to notifying CLEC at least forty-eight (48) hours or two (2) business days, whichever is greater, before access to the Collocation Space is required.
3.4.3 CLEC must submit its Adjacent Arrangement construction plans and specifications to AT&T when it places its Firm Order. AT&T shall review CLEC’s plans and specifications prior to the construction of an Adjacent Arrangement to ensure CLEC’s compliance with AT&T’s specifications. AT&T shall complete its review within fifteen (15) days after receipt of the plans and specifications from CLEC for the Adjacent Arrangement. AT&T may inspect the Adjacen...
Adjacent Collocation. 6.14.1. Sprint will permit SBCT to construct or otherwise procure an adjacent collocation structure, subject only to reasonable safety and maintenance requirements, where space within the Structure is legitimately exhausted, and subject to technical feasibility. Sprint and SBCT will mutually agree on the location of the designated space on Sprint's Premises where an adjacent structure (such as a CEV or similar structure) will be placed.