Common use of Application Data Clause in Contracts

Application Data. Section Group Option Communica- tion ports Communication type This section allows you to set up the communication port between your SmartLeague-equipped computer and the control panel. For a description of the type of connection and its use refer to Chapter 4 - Connecting to the control panel. • Serial Serial port Selection box for the serial port. • SmartLAN in models: -SmartLAN -SmartLAN/SF for SmartLoop control panels -SmartLAN/484 for SmartLine control panels -SmartLAN/G -SmartLAN/SI For SmartLiving control panels IP Address Programming field for the IP address of the SmartLAN board of the control panel. The address is to be followed by the programming port. For example: 10.101.102.10:5004 Button to open a window which allows you to search for the SmartLAN board connected to the Ethernet network the PC is linked to. Once the search has been launched, a list of all the detected boards and their details will appear. By double clicking on any one of the boards, its address and port will be inserted automatically in the IP Address section. User name Password Programming field for the credentials of the user requesting access. The credentials must be those set in the programming section of the control panel network board. Connection check Button to open a window for the TCPIP connection check. Configure Button to open a window for the SmartLAN/SF or SmartLAN/ SI programming procedures (paragraph 4-3 SmartLAN/SF and SmartLAN/SI programming). Encrypt data Option to enable the encryption of transmitted data. • Connection via GPRS Start Button to open a window for the GPRS connection (paragraph 4-1 Connection via GPRS). • Connection via Cloud User name Password Programming field for the details of Supervisor user of the Inim Cloud who will access it by clicking on the Login button. List of control panels avail- able on Cloud Click on the Login button for a list of the control panels registered in the cloud profile of the Supervisor which are the same type as the SmartLiving control panel that opened the solution. The control panel to be programmed can be selected from the list. Check Connec- tion Button to start a connection test with the control panel selected in the box above. Printer set- tings This section allows you to arrange the headers of the printouts requested by means of the key. Various Language Section for the selection of the SmartLeague software language (paragraph 3-3 Language). Language changes will become operative only after the software restarts. Change New language These buttons open a window containing an application which allows you to change the language setting, selectable in the box, or to create a new language. Direct line Section for the address of the website shown on the startpage of the SmartLeague software. This setting will become operative only after the software restarts. Download con- tents every: Option which, if enabled, determines the frequency (expressed in minutes) of the update of the website indicated in the field below. Access control Option which enables the check on user access (paragraph 1-4 Software access). Check ping on TCP/IP con- nection Option which enables the TCPIP connection check, by means of a ping before each programming data read/write operation. In the case of local networks, this option must be activated. In the case of connections through the router, however, this option might impede the communication if the recipient router is not enabled to respond to pings. Section for the management of the SmartLink layout templates (view mode). This section allows you to create user profiles, specify the groups each user belongs to and indicate their enablements. For further details refer to paragraph 1-4 Software access. The SmartLeague application is capable of using different languages selectable from the Language section, under Settings, Application data, Various. To select the application language, click on the required option then press the OK