Bending test. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.5.
Appears in 5 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations
Bending test. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.5.
Appears in 5 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations
Bending test. 2.5.3.1. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall must be capable of withstanding the test pressure as mentioned in paragraph 1.52.5.4.2.
Appears in 5 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.5.4.5.5.2. below. Figure 4 (example only) (a = 102 mm; b = 241 mm)
Appears in 5 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.52.5.4.2. below. The test shall be performed on both new hose and after ageing according to ISO 188 as prescribed in paragraph 2.4.2.3. and subsequently to ISO 1817 as prescribed in paragraph 2.4.2.2. above.
Appears in 5 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations
Bending test. 2.5.3.1. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.52.5.4.2.
Appears in 4 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall must be capable of withstanding the test pressure as mentioned in paragraph 1.5.4.5.5.2. Figure 4 (example only) (a = 102 mm; b = 241 mm)
Appears in 3 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall must be capable of withstanding the test test- pressure as mentioned in paragraph 1.51.5.5.2.
Appears in 3 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test test-pressure as mentioned in paragraph 1.51.5.5.2. below.
Appears in 3 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.5.3.5.5.2. below. Figure 3 (example only) ((a = 102 mm; b= 241 mm)
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.5.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test test- pressure as mentioned in paragraph 1.51.5.5.2. below.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall must be capable of withstanding the test test-pressure as mentioned in paragraph 1.51.5.5.2.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.5.3.5.5.2. below. Figure 3 (example only)
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-alternating- bending-test without breaking. After the test the hose shall must be capable of withstanding the test pressure as mentioned in paragraph 1.5.2.5.4.2. 2.5.3.2. propulsion mechanism
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-alternating- bending-test without breaking. After the test the hose shall must be capable of withstanding the test test-pressure as mentioned in paragraph 1.5.1.5.5.2. E/ECE/324 Rev.1/Add.66/Rev.1 Regulation No. 67 page 66 Annex 8 1.5.4.2. propulsion mechanism
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Bending test. 3.5.4.1. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 1.5.3.5.5.2. below. Figure 3 (example only) mass propulsion mechanism
Appears in 1 contract
Bending test. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-alternating- bending-test without breaking. After the test the hose shall must be capable of withstanding the test pressure as mentioned in paragraph 1.5.3.5.5.2. propulsion mechanism
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles