Common use of BURIED CONDUIT Clause in Contracts

BURIED CONDUIT. Item 45(a)1 - Replace conduit under paved surfaces including permanent pavement restoration (non- protected roadway). Furnish and install conduit size 1 1/2". Item 45(a)2 - Replace conduit under paved surfaces including permanent pavement restoration (non- protected roadway). Furnish and install conduit size 2". Item 45(a)3 - Replace conduit under paved surfaces including permanent pavement restoration (non-` protected roadway). Furnish and install conduit size 3". Item 45(b)1 - Replace conduit under unpaved surfaces. Furnish and install conduit size 1 1/2". Item 45(b)2 - Replace conduit under unpaved surfaces. Furnish and install conduit size 2". Item 45(b)3 - Replace conduit under unpaved surfaces. Furnish and install conduit size 3". Item 45(c)1 - Furnish all labor, material and equipment necessary to sawcut paved area to a depth of 6" and furnish and install 2" conduit at a depth of 18" or as directed by the EIU, including the permanent pavement restoration per foot on a protected street/guaranteed roadway. Item 45(c)2 - Furnish all labor, material and equipment necessary to sawcut paved area to a depth of 6" and furnish and install 3" conduit at a depth of 18" or as directed by the EIU, including the permanent pavement restoration per foot on a protected street/guaranteed roadway. Item 45(d)1 - Furnish and install 2" conduit. Conduit to be driven under roadway. Item 45(d)2 - Furnish and install 3" conduit. Conduit to be driven under roadway. 4.78.1 The Contractor shall furnish all labor, material, and equipment necessary to replace defective conduit or parkway cables. The new conduit shall be the same size as the conduit being replaced. The Contractor shall do all the necessary excavation, expose and remove the existing conduit and section in the new replacement conduit. The new conduit and its installation shall meet the requirements of Section 4.39. The excavation shall be backfilled and the surface area restored to its original condition as required by the NYCDOT Highway Rules. When the replacement conduit terminates in a pull box or lamppost, it shall be provided with grounding bushing bonded, as directed by the EIU. All pull box covers that are opened for access must be secured with tamper- proof screws as per DWG Nos. J-3179 A and B. 4.78.2 The Contractor shall ensure that: