Common use of Conditions and Exclusions Clause in Contracts

Conditions and Exclusions. 6.1 To the full extent permitted by law, this Warranty does not cover TYPE EXCLUSIONS General ● Fair wear and tear of Goods; ● The cost of transport for Goods to or from Us; ● Defects caused by misuse, abuse, accident or ● Any liability We may have in contract, tort neglect by You; (including, without limitation, negligence or ● Defects caused by any Force Majeure event; breach of statutory duty), personal injury or ● Defects caused by damage during transport, property damage howsoever caused, or unless transported by Us or Our agent; otherwise to compensate You for: ● Your failure to install, care, store and/or maintain (1) Any increased costs or expenses; the Goods in accordance with the Manufacturer’s (2) Any loss of profit, revenue, business, Instructions; contracts or anticipated savings; ● The installing or refinishing of a replacement (3) Any loss or expense resulting from a claim Good supplied under this Warranty, unless the by a third party; or installation or finishing was part of Services (4) Any special, indirect or consequential loss or originally carried out by or contracted to Us; damage of any nature whatsoever. ● Services carried out by personnel or agents ● All other warranties, whether implied or which are not authorised by Us; otherwise, not set out in this Warranty except for ● Modification, alteration or repair of Goods, or any those that cannot be excluded at law under the other Services, which are not authorised by Us; Domestic Building Acts, the Australian ● Any defects or allowances permitted in Consumer Law or any other applicable law. accordance with Australian Standards ● Unless expressly stated otherwise, and abnormal stress imposed on the Goods due to coastal conditions, salt spray, corrosive chemicals, acid rain, extreme heat and/or humidity, excessive vibration or movements of buildings or foundations, or other location related factor; Doors ● A warp, bow or twist of 4mm or less for doors up ● Normal show-through of frame and core to 2150mm high, 6mm or less for door heights components in flush panel doors; between 2150mm and 2400mm and will not be ● Defects due to moisture content which falls below liable for any warp, bow or twist where: 10% or for moisture content which exceeds 15%; ○ Doors exceed 2438mm high or 1219mm ● Natural variations in the colour, texture and grain wide pattern of timber and aluminium componentry of ○ Doors have face veneers of different Goods, including the colour, grain pattern and species or unbalanced construction thickness of matching timber edge strips; ○ Doors are improperly hung or do not swing ● Fading, darkening or colour change in aluminium freely. surfaces of Goods, including powder coated ○ External doors which have been: finishes, caused by normal weather conditions; ■ Painted with colours that have Light ● Doors where closers and associated hardware Reflective Value of less than 50. are fixed in a manner that causes undue stress ■ Clad with metal that has Solar on the door. Reflective Index value of less than 40. WARRANTY TYPE EXCLUSIONS Glass ● Glass Goods that have been modified in any way ● Natural variations in the clarity of glass; by the addition of film, tint, privacy or any other ● Discolouration of glass finishes that may occur finish not authorised by Us; under certain climatic conditions ● Glass breakage not caused solely by Our faulty workmanship or materials, or Out failure to render Services with due care and skill; Hardware & Moving Parts ● Plated finished products; ● Tea staining

Conditions and Exclusions. 6.1 To In order for the full extent permitted by lawLimited Warranty to be in effect, this Warranty does not cover TYPE EXCLUSIONS General ● Fair wear and tear of Goods; ● The cost of transport for Goods to or from Us; ● Defects caused by misuse, abuse, accident or ● Any liability We may have in contract, tort neglect by You; (including, without limitation, negligence or ● Defects caused by any Force Majeure event; breach of statutory duty), personal injury or ● Defects caused by damage during transport, property damage howsoever caused, or unless transported by Us or Our agent; otherwise to compensate You forthe applicable Uponor products must be: ● Your failure to install, care, store and/or maintain (1) Any increased costs or expenses; the Goods • Installed in accordance with the Manufacturer’s (2) Any loss of profit, revenue, business, Instructions; contracts or anticipated savings; ● The installing or refinishing of a replacement (3) Any loss or expense resulting from a claim Good supplied under this Warranty, unless the installation instructions provided by Uponor and by a third partyprofessional service provider or contractor recognized by Uponor; or installation or finishing was part of Services (4) Any special, indirect or consequential loss or • In their originally carried out by or contracted to Usinstalled location; damage of any nature whatsoever. ● Services carried out by personnel or agents ● All other warranties, whether implied or which are not authorised by Us• Installed in an end-use environment as intended for the product; otherwise, not set out and • Installed in this Warranty except for ● Modification, alteration or repair of Goods, or any those that cannot be excluded at law under the other Services, which are not authorised by Us; Domestic Building Acts, the Australian ● Any defects or allowances permitted in Consumer Law or any other applicable law. accordance with Australian Standards ● Unless expressly stated otherwisethen-applicable building, and abnormal stress imposed on the Goods due to coastal conditionsmechanical, salt spray, corrosive chemicals, acid rain, extreme heat and/or humidity, excessive vibration or movements of buildings or foundationselectrical, or other location related factorapplicable code requirements In addition to the conditions above, the Limited Warranty does not apply when product failure or resulting damages are caused by: • Faulty installation; Doors ● A warp• Abuse or misuse; • Handling, bow storage, testing, or twist use not in accordance with Uponor’s applicable user guide; • Tampering or accidental damage; • Components not manufactured or sold by Uponor are used with the product; • Exposure to ultra violet light; • Breakdowns, fluctuations, or interruptions in electric power or the telecommunications network; • Acts of 4mm God, including but not limited to lightning, flood, tornado, earthquake, or less hurricane; • Abnormal operating conditions; or • Modifications or repair unless previously approved in writing by an authorized Uponor representative If replacement product is provided to a claimant under this Limited Warranty, the Term of Limited Warranty for doors up ● Normal show-the replacement product shall run from the initial Commencement Date of the product which was replaced In the event claimant and Uponor are unable to resolve a claim through of frame informal means, the parties shall submit the dispute to the American Arbitration Association or its successor (the “Association”) for arbitration, and core to 2150mm high, 6mm or less for door heights components in flush panel doors; between 2150mm and 2400mm and will not any arbitration proceedings shall be ● Defects due to moisture content which falls below liable for any warp, bow or twist where: 10% or for moisture content which exceeds 15%; ○ Doors exceed 2438mm high or 1219mm ● Natural variations conducted before a single arbitrator in the colourMinneapolis, texture Minnesota metropolitan area. NOTWITHSTANDING THE FOREGOING, NEITHER THE CLAIMANT NOR UPONOR, INC. SHALL BE ENTITLED TO ARBITRATE ANY CLAIMS AS A REPRESENTATIVE OR MEMBER OF A CLASS, AND NEITHER THE CLAIMANT NOR UPONOR SHALL BE ENTITLED TO JOIN OR CONSOLIDATE CLAIMS WITH ANY OTHER PARTIES IN ARBITRATION. NO LITIGATION SHALL BE COMMENCED IN ANY FORM WITH RESPECT TO UPONOR’S PRODUCTS EXCEPT AS DESCRIBED ABOVE. To the extent that the claimant is not otherwise bound to commence any claim against Uponor in arbitration as set forth elsewhere in this Limited Warranty, whether because of consumer legislation or otherwise, the claimant accepts the terms and grain wide pattern conditions of timber the Warranty Claim Dispute Process and aluminium componentry of ○ Doors have face veneers of different Goodsthe Limited Warranty, including terms concerning arbitration and choice of laws, by initiating dispute resolution, arbitration or litigation which in whole or in part references or relies upon the colourwarranties and conditions set forth in this Limited Warranty. By so invoking the terms of this Limited Warranty in whole or in part, grain pattern and species the claimant agrees to stay any dispute resolution, arbitration or unbalanced construction thickness litigation in favor of matching timber edge strips; ○ Doors are improperly hung or do not swing ● Fading, darkening or colour change in aluminium freely. surfaces of Goods, including powder coated ○ External doors which have been: finishes, caused by normal weather conditions; ■ Painted with colours that have Light ● Doors where closers and associated hardware Reflective Value of less than 50. are fixed in a manner that causes undue stress ■ Clad with metal that has Solar on the door. Reflective Index value of less than 40. WARRANTY TYPE EXCLUSIONS Glass ● Glass Goods that have been modified in any way ● Natural variations arbitration as set forth in the clarity Warranty Claim Dispute Process section of glass; by the addition of film, tint, privacy or any other ● Discolouration of glass finishes that may occur finish not authorised by Us; under certain climatic conditions ● Glass breakage not caused solely by Our faulty workmanship or materials, or Out failure to render Services with due care and skill; Hardware & Moving Parts ● Plated finished products; ● Tea stainingthis Limited Warranty.

Conditions and Exclusions. 6.1 To the full extent permitted by law, this Warranty does not cover cover: TYPE EXCLUSIONS General ● (applicable to all Goods and Services, including those listed below in this table). • Fair wear and tear of Goods; ● • Any defects, faults, failures or allowances permitted in • Defects, faults or failures caused by misuse, abuse, damage, accordance with Australian Standards accident or neglect by You; • Unless expressly stated otherwise, any abnormal stress • Defects, faults or failures caused by any Force Majeure event; imposed on the Goods due to coastal conditions, salt spray, • Defects, faults or failures caused by damage during transport, corrosive chemicals, acid rain, extreme heat and/or humidity, unless transported by Us or Our agent; excessive vibration or movements of buildings or foundations, or • Your failure to handle, install, care, store, operate and/or other location-related factor; maintain the Goods in accordance with the Manufacturer’s • The cost of transport for Goods to or from Us; ● Defects caused by misuse, abuse, accident or ● Instructions; • Any liability We may have in contract, tort neglect by You; (including, without • any Claims that Goods or Services are defective or faulty, where limitation, negligence or ● Defects caused by any Force Majeure event; breach of statutory duty), personal such a Claim relates to conformity of the Goods or Services with injury or ● Defects caused by damage during transport, property damage howsoever caused, or unless transported by Us or Our agent; otherwise to any specifications, requirements or modification requests made compensate You for: ● Your failure by You to installUs, care, store and/or maintain where We have complied with such a request; (1) Any increased costs or expenses; the Goods in accordance with the Manufacturer’s • The installation or refinishing of a replacement Good supplied (2) Any loss of profit, revenue, business, Instructions; contracts or anticipated savings; ● The installing under this Warranty, or the cost of installation or refinishing of a anticipated savings; replacement Good under this Warranty, unless the installation (3) Any loss or expense resulting from a claim Good supplied under this Warranty, unless the by a third party; or installation or re-finishing was part of Services originally carried out by or or contracted to Us; (4) Any special, indirect or consequential loss or originally carried out by or contracted to Us; damage of any nature whatsoever. ● • Services carried out by personnel or agents ● which are not nature whatsoever. authorised by Us; • All other warranties, whether implied or which are not authorised by Us; otherwise, not set out in this Warranty except for ● • Modification, alteration or repair of Goods, or any other in this Warranty except for those that cannot be excluded at law under the other Services, which are not authorised by Us; under the Domestic Building Acts, the Australian ● Any defects or allowances permitted in Consumer Law or any other applicable law. accordance with Australian Standards ● Unless expressly stated otherwise, Windows and abnormal stress imposed on the Goods due to coastal conditions, salt spray, corrosive chemicals, acid rain, extreme heat and/or humidity, excessive vibration or movements of buildings or foundations, or other location related factor; Doors ● • A warp, bow or twist of 4mm or less for doors up ● Normal show-through of frame and core to 21502,150mm • Defects due to moisture content which falls below 10% or for high, 6mm or less for door heights components in flush panel doors; between 21502,150mm and 2400moisture content which exceeds 15%; 2,400mm and will not be ● Defects due to moisture content which falls below liable for any warp, bow or twist where: 10% or for moisture content which exceeds 15%; ○ Doors exceed 2438• Normal show-through of frame and core components in flush doors exceeding 2,438mm high or 12191,219mm ● wide; doors; • For doors (excluding wardrobe doors): • Natural variations in the colour, texture and grain wide pattern of - if bleeding stains occur when painting timber and an oil based timber, plastic and aluminium componentry of ○ Doors have face veneers of different Goods, including undercoat has not been used to cover and seal the stain; the colour, grain pattern and species or unbalanced construction thickness of matching timber edge strips- if solid construction doors have not been hung with 3 x strips and western red cedar components; ○ Doors are improperly hung or do not swing ● 100mm hinges; • Fading, darkening or colour change in aluminium freely. surfaces of - if the door(s) are not sealed within one month from the date Goods, including powder coated ○ External doors which have been: powdercoated finishes, caused by normal of delivery with two coats of paint or varnish to both faces and weather conditions; ■ Painted with colours all edges, including top and bottom and are hung in the correct • Window reveals which have not been protected from the manner; or elements within two weeks of being delivered to site; - for exterior doors, if no exterior finish has been applied and in • Any costs or charges of hanging, painting or other charges light reflective colours; arising from the replacement of doors (including wardrobe • For wardrobe doors, if the wardrobe door(s) contain a warp less doors) or windows; and than five millimetres (5mm). • Any other matter that have Light ● Doors where closers and associated hardware Reflective Value We may advise You of less than 50from time to time. are fixed in a manner that causes undue stress ■ Clad with metal that has Solar on the door. Reflective Index value of less than 40. WARRANTY TYPE EXCLUSIONS Glass ● • Glass Goods that have been modified in any way ● Natural variations in the clarity of glass; by the addition • Nanoclean EnduroShield® glass coating treatment; of a film, tint, privacy or any other ● finish not authorised by Us; • Discolouration of glass finishes that may occur finish not authorised by Us; under certain climatic conditions ● • Glass breakage not caused solely by Our faulty workmanship or climatic conditions; materials, or Out Our failure to render Services with due care and skill; • Any costs or charges of installation, removal, labour or other costs • Natural variations in the clarity of glass and paint colour batching arising from the replacement of any Glass Goods; and in respect of painted glass splashbacks; • Any other matter that We may advise You of from time to time. TYPE EXCLUSIONS Nanoclean • The Nanoclean Warranty applies specifically to the EnduroShield® glass coating treatment that is applied to the surface of shower screen or other glass Goods. • The Nanoclean Warranty does not cover the glass, showerscreen, Hardware, installation or any other component of the Goods, other than the EnduroShield® coating. Hardware & Moving Parts ● • Plated finished products; ● • Goods used in conjunction with non-compliant cylinders (non FHS Cylinders); • Tea staining; • Where hardware Goods have been incorporated into another entity’s or manufacture’s product; • fading, colour change or damage caused by the external environment due to normal weather conditions (that will cause any coloured surface to fade or darken gradually); • manufacturing standards and tolerances nor industry variations in colour of aluminium, plastic and timber componentry; and • Wear and tear of fly mesh. 6.2 In addition to those matters expressed as not covered by the Warranty in clause 6.1 (and the above table), the Warranty does not apply and to the extent permitted by law, JELD-WEN will not be liable to a Customer for a Claim, in relation of Goods or Services where payment for the Goods or Services has not been received in full by JELD-WEN in accordance with the Terms and Conditions.

Conditions and Exclusions. 6.1 To the full extent permitted by law, this Warranty does not cover TYPE EXCLUSIONS General ● • Fair wear and tear of Goods; ● imposed on the Goods due to coastal conditions, salt spray, • Defects caused by misuse, abuse, accident or neglect by You; corrosive chemicals, acid rain, extreme heat and/or humidity, • Defects caused by any Force Majeure event; excessive vibration or movements of buildings or foundations, • Defects caused by damage during transport, unless transported or other location-related factor; by Us or Our agent; • The cost of transport for Goods to or from Us; ● Defects caused by misuse, abuse, accident or ● Any liability We may have in contract, tort neglect by You; (including, without limitation, negligence or ● Defects caused by any Force Majeure event; breach of statutory duty), personal injury or ● Defects caused by damage during transport, property damage howsoever caused, or unless transported by Us or Our agent; otherwise to compensate You for: ● • Your failure to install, care, store and/or maintain the Goods in • Any liability We may have in contract, tort (including, without accordance with the Manufacturer’s Instructions; limitation, negligence or breach of statutory duty), personal • The installation or refinishing of a replacement Good supplied injury or property damage howsoever caused, or otherwise to under this Warranty, or the cost of installation or refinishing of a compensate You for: replacement Good under this Warranty, unless the installation (1) Any increased costs or expenses; the Goods in accordance with the Manufacturer’s or re-finishing was part of Services originally carried out by or (2) Any loss of profit, revenue, business, Instructions; contracts or contracted to Us; anticipated savings; ● The installing • Services carried out by personnel or refinishing of a replacement agents which are not (3) Any loss or expense resulting from a claim Good supplied under this Warranty, unless the by a third authorised by Us; party; or installation • Modification, alteration or finishing was part repair of Services Goods, or any other (4) Any special, indirect or consequential loss or originally carried out by or contracted to Us; damage of any nature whatsoever. ● Services carried out by personnel or agents ● All other warranties, whether implied or which are not authorised by Us; otherwise, not set out in this Warranty except for ● Modification, alteration or repair of Goods, or any those that cannot be excluded at law under the other Services, which are not authorised by Us; nature whatsoever. • Any defects or allowances permitted in accordance with • All other warranties, whether implied or otherwise, not set out Australian Standards in this Warranty except for those that cannot be excluded at law • Unless expressly stated otherwise, any abnormal stress under the Domestic Building Acts, the Australian ● Any defects or allowances permitted in Consumer Law or any other applicable law. accordance with Australian Standards ● Unless expressly stated otherwise, Windows and abnormal stress imposed on the Goods due to coastal conditions, salt spray, corrosive chemicals, acid rain, extreme heat and/or humidity, excessive vibration or movements of buildings or foundations, or other location related factor; Doors ● A • Any warp, bow or twist of 4mm or less for in doors up ● Normal show-through of frame and core to 2150mm high, 6mm or less for door heights components in flush panel doors; between 2150mm and 2400mm and will not be ● Defects due to moisture content which falls below liable for any warp, bow or twist whereis: 10% or for moisture content which exceeds 15%; ○ Doors exceed 2438mm high or 1219mm ● • Natural variations in the colour, texture and grain wide pattern of timber (1) 4mm or less for doors up to 2,150mm high; timber, plastic and aluminium componentry of ○ Doors have face veneers of different Goods, including (2) 6mm or less for door heights between 2150mm and the colour, grain pattern and species or unbalanced construction thickness of matching timber edge strips2,400mm; ○ Doors are improperly hung and strips and western red cedar components; (3) 7mm or do not swing ● less for door heights above 2,400mm; • Fading, darkening or colour change in aluminium freely. surfaces of • Any warp, bow or twist in doors exceeding 2438mm high or Goods, including powder coated ○ External doors which have been: powdercoated finishes, caused by normal 1219mm wide; weather conditions; ■ Painted with colours • Defects due to moisture content which falls below 10% or for • Window reveals which have not been protected from the moisture content which exceeds 15%; elements within two weeks of being delivered to site. • Normal show-through of frame and core components in flush • Any other matter that have Light ● Doors where closers and associated hardware Reflective Value We may advise You of less than 50from time to time. are fixed in a manner that causes undue stress ■ Clad with metal that has Solar on the door. Reflective Index value of less than 40. WARRANTY TYPE EXCLUSIONS doors; Glass ● • Glass Goods that have been modified in any way ● by the • Natural variations in the clarity of glass; by the glass and paint colour addition of a film, tint, privacy or any other ● Discolouration of glass finishes that may occur finish not authorised batching in respect of painted glass splashbacks; by Us; under certain climatic conditions ● • Nanoclean EnduroShield® glass coating treatment; • Glass breakage not caused solely by Our faulty workmanship or • Any other matter that We may advise You of from time to time. materials, or Out Our failure to render Services with due care and skill; • Discolouration of glass finishes that may occur under certain climatic conditions; Nanoclean • The Nanoclean Warranty applies specifically to the EnduroShield® glass coating treatment that is applied to the surface of shower screen or other glass Goods. • The Nanoclean Warranty does not cover the glass, showerscreen, Hardware, installation or any other component of the Goods, other than the EnduroShield® coating. Hardware & Moving Parts ● • Plated finished products; ● • Goods used in conjunction with non-compliant cylinders (non FHS Cylinders); • Tea staining; and • Wear and tear of fly mesh.

Conditions and Exclusions. 6.1 To the full extent permitted by law, this Warranty does not cover TYPE EXCLUSIONS cover. Type Exclusions General ● • Fair wear and tear of Goods; ● The cost of transport for Goods to or from Us; ● • Unless expressly stated otherwise, any abnormal stress imposed on the • Defects caused by misuse, abuse, accident or ● Any liability We may have in contract, tort neglect by You; (including, without limitation, negligence or ● Defects caused by any Force Majeure event; breach of statutory duty), personal injury or ● Defects caused by damage during transport, property damage howsoever caused, or unless transported by Us or Our agent; otherwise to compensate You for: ● Your failure to install, care, store and/or maintain (1) Any increased costs or expenses; the Goods in accordance with the Manufacturer’s (2) Any loss of profit, revenue, business, Instructions; contracts or anticipated savings; ● The installing or refinishing of a replacement (3) Any loss or expense resulting from a claim Good supplied under this Warranty, unless the by a third party; or installation or finishing was part of Services (4) Any special, indirect or consequential loss or originally carried out by or contracted to Us; damage of any nature whatsoever. ● Services carried out by personnel or agents ● All other warranties, whether implied or which are not authorised by Us; otherwise, not set out in this Warranty except for ● Modification, alteration or repair of Goods, or any those that cannot be excluded at law under the other Services, which are not authorised by Us; Domestic Building Acts, the Australian ● Any defects or allowances permitted in Consumer Law or any other applicable law. accordance with Australian Standards ● Unless expressly stated otherwise, and abnormal stress imposed on the Goods due to coastal conditions, salt spray, corrosive chemicals, acid rain, extreme heat and/or humidity, excessive vibration or movements • Defects caused by any Force Majeure event; of buildings or foundations, or other location location-related factorfactors. • Defects caused by damage during transport, unless transported by Us • The cost of transport for Goods to or from SWD. ; or Our agent; • Any liability We may have in contract, tort (including, without limitation, • Your failure to install, care, store and/or maintain the Goods in negligence or breach of statutory duty), personal injury or property accordance with the Manufacturer’s Instructions; damage howsoever caused, or otherwise to compensate You for: • The installation or refinishing of a replacement Good supplied under (1) Any increased costs or expenses; this Warranty, or the cost of installation or refinishing of a replacement Good under this Warranty, unless the installation or re-finishing was (2) Any loss of profit, revenue, business, contracts or anticipated savings; part of Services originally carried out by or contracted to Us; (3) Any loss or expense resulting from a claim by a third party; or • Services carried out by personnel or agents which are not authorised (4) Any special, indirect or consequential loss or damage of nature by SWD whatsoever. • Modification, alteration or repair of Goods, or any other Services, which • All other warranties, whether implied or otherwise, not set out in this are not authorised by SWD.; Warranty except for those that cannot be excluded at law under the • Any defects or allowances permitted in accordance with Australian Domestic Building Acts, the Australian Consumer Law or any other Standards applicable law. Windows and Doors ● • A warp, bow or twist of 45mm or less for doors up ● to 2,150mm high, 6mm • Fading, darkening or colour change in metal surfaces of Goods, or less for door heights between 2,150mm and 2,400mm and will not be including powdercoated finishes, caused by normal weather conditions; liable for any warp, bow or twist for doors exceeding 2,400mm high or • Window reveals which have not been protected from the elements 1,000mm wide; within two weeks of being delivered to site. • Defects due to moisture content which falls below 10% or for moisture • Any other matter that We may advise You of from time to time. content which exceeds 15%; • Normal show-through of frame and core to 2150mm high, 6mm or less for door heights components in flush panel doors; between 2150mm and 2400mm and will not be ● Defects due to moisture content which falls below liable for any warp, bow or twist where: 10% or for moisture content which exceeds 15%; ○ Doors exceed 2438mm high or 1219mm ● • Natural variations in the colour, texture and grain wide pattern of timber Steel, timber, plastic and aluminium componentry of ○ Doors have face veneers of different Goods, including the colour, grain pattern and species or unbalanced construction thickness of matching timber edge strips; ○ Doors are improperly hung or do not swing ● Fading, darkening or colour change in aluminium freely. surfaces of Goods, including powder coated ○ External doors which have been: finishes, caused by normal weather conditions; ■ Painted with colours that have Light ● Doors where closers and associated hardware Reflective Value of less than 50. are fixed in a manner that causes undue stress ■ Clad with metal that has Solar on the door. Reflective Index value of less than 40. WARRANTY TYPE EXCLUSIONS steel items Glass ● • Glass Goods that have been modified in any way ● Natural variations in the clarity of glass; by the addition of a film, tint, privacy or any other ● Discolouration of glass finishes that may occur finish not authorised authorized by Us; under certain climatic conditions ● SWD. • Glass breakage not caused solely by Our faulty workmanship or materials, or Out Our failure to render Services with due care and skill; • Discolouration of glass finishes that may occur under certain climatic conditions; Silicone • The silicone that we apply to retain the glass (wet glaze system) is not • Natural variations from furnacing the glass that occur during the covered under warranty for any of the above-mentioned reasons, i.e. toughing process defects caused by misuse, abuse, wear and tear, neglect, damage, • Natural variations in the clarity of glass weather etc. • Any other matter that We may advise You of from time to time. Hardware & S Moving Parts ● • Plated finished products; ● • Goods used in conjunction with non-compliant cylinders; • Tea staining; and • Wear and tear