Common use of CONDITIONS FOR TECHNICAL UNITS Clause in Contracts

CONDITIONS FOR TECHNICAL UNITS. II.3.1 The VSP operates Technical Units that are able to produce and/or absorb the Reactive Power to and from the ▇▇▇▇ ▇▇▇▇ or has concluded an agreement with one or more ▇▇▇▇ ▇▇▇▇ User(s) or CDS User(s) that operate(s) Technical Units that are able to produce and/or absorb the Reactive Power to and from the ▇▇▇▇ ▇▇▇▇. II.3.2 The Technical Units used by the VSP to provide the Service are listed in Annex 1 (including the necessary technical and measurement information). The list of these Technical Units may change at any time subject to agreement by and between the Parties throughout the term of the Service delivery period. II.3.3 The Technical Unit may participate in the Service under the following conditions: a) The Technical Units shall meet the requirements of the articles of the Federal Grid Code and of the requirements of general application in accordance with article 7(4) of the RfG related to the Service as defined in the table below and, for the automatic service, comply with the relative Sensitivity Coefficient αeq. The Sensitivity Coefficient is determined by ▇▇▇▇ following discussions between ▇▇▇▇ and the VSP as described in Annex 13 and in coherence with the criteria defined to that end in the Connection Contract (in which the technical characteristics of the Technical Unit are described).This coefficient is set in Annex 1. Technical Unit Articles from the Federal Grid Code Articles from the requirements of general application in accordance with article 7(4) of the RfG3 New Type B,C,D SPGM Art. 89 and 234 Art. 4.3.1/5.5.1 New Type B,C,D PPM Art. 93 and 234 Art. 4.4.2/5.6.2 New Type B, C, D SPM Art. 99 and 234 n.a.4 New HVDC interconnector Art. 104 and 234 New generators connected on a HVDC link Art. 106 and 234 New HVDC conversion stations at isolated extremity Art. 107 and 234 4 This table may be subject to evolutions of the legislation framework such as the adaptation of the regional grid codes New offshore PPM with onshore connection points Art. 118, 119 and 234 New offshore PPM with offshore connection points Art. 130, 131 and 234 Existing SPGM and PPM type C,D Art. 62 to 68 and 234 Existing SPGM and PPM type B Art. 62 to 68 and 234 Other Technical Units without obligation to provide the Service (such as Demand facilities directly connected to the ▇▇▇▇ Grid, Technical Units connected to CDS/Public Distribution Grid, existing HVDC interconnector…) Art. 234 b) ▇▇▇▇ is entitled to evaluate, at any time during the Service delivery period, whether the Technical Units comply with the conditions mentioned in Art. II.3.3 a). For the avoidance of doubt, this does not entail any right for ▇▇▇▇ to physically access the Technical Unit(s) without prejudice to any other regulation, i.e. the Federal Grid Code, regarding access to the ▇▇▇▇ ▇▇▇▇ User’s connection installations. If ▇▇▇▇ establishes that (a) Technical Unit(s) fail(s) to comply with these conditions, the participation in the Service of the concerned Technical Unit(s) and the corresponding remuneration as set in Art. II.8.3 will be suspended until compliance has been fully restored. c) Before the beginning of Service delivery with a Technical Unit, the VSP of this Technical Unit must perform a Communication Test to verify the correct exchange of messages as per Art. II.5.4

CONDITIONS FOR TECHNICAL UNITS. II.3.1 The VSP operates Technical Units that are able to produce and/or absorb the Reactive Power to and from the ▇▇▇▇ ▇▇▇▇ Grid or has concluded an agreement with one or more ▇▇▇▇ ▇▇▇▇ Grid User(s) or CDS User(s) that operate(s) Technical Units that are able to produce and/or absorb the Reactive Power to and from the ▇▇▇▇ ▇▇▇▇Grid. II.3.2 The Technical Units used by the VSP to provide the Service are listed in Annex 1 (including the necessary technical and measurement information). The list of these Technical Units may change at any time subject to agreement by and between the Parties throughout the term of the Service delivery period. II.3.3 The Technical Unit may participate in the Service under the following conditions: a) The Technical Units shall meet the requirements of the articles of the Federal Grid Code and of the requirements of general application in accordance with article 7(4) of the RfG related to the Service as defined in the table below and, for the automatic service, comply with the relative Sensitivity Coefficient αeq. The Sensitivity Coefficient is determined by ▇▇▇▇ following discussions between ▇▇▇▇ and the VSP as described in Annex 13 and in coherence with the criteria defined to that end in the Connection Contract (in which the technical characteristics of the Technical Unit are described).This coefficient is set in Annex 1. Technical Unit Articles from the Federal Grid Code Articles from the requirements of general application in accordance with article 7(4) of the RfG3 New Type B▇▇▇▇ ▇▇▇ ▇▇▇▇ ▇,C▇,D ▇ SPGM Art. 89 and 234 Art. 4.3.1/5.5.1 New Type B,C,D PPM Art. 93 and 234 Art. 4.4.2/5.6.2 New Type B, C, D SPM Art. 99 and 234 n.a.4 n.a.2 New HVDC interconnector Art. 104 and 234 New generators connected on a HVDC link Art. 106 and 234 New HVDC conversion stations at isolated extremity Art. 107 and 234 4 New offshore PPM with onshore connection points Art. 118, 119 and 234 2 This table may be subject to evolutions of the legislation framework such as the adaptation of the regional grid codes New offshore PPM with onshore connection points Art. 118, 119 and 234 New offshore PPM with offshore connection points Art. 130, 131 and 234 Existing SPGM and PPM type C,D Art. 62 to 68 and 234 Existing SPGM and PPM type B Art. 62 to 68 and 234 Other Technical Units without obligation to provide the Service (such as Demand facilities directly connected to the ▇▇▇▇ Grid, Technical Units connected to CDS/Public Distribution Grid, existing HVDC interconnector…) Art. 234 b) ▇▇▇▇ is entitled to evaluate, at any time during the Service delivery period, whether the Technical Units comply with the conditions mentioned in Art. II.3.3 a). For the avoidance of doubt, this does not entail any right for ▇▇▇▇ to physically access the Technical Unit(s) without prejudice to any other regulation, i.e. the Federal Grid Code, regarding access to the ▇▇▇▇ ▇▇▇▇ Grid User’s connection installations. If ▇▇▇▇ establishes that (a) Technical Unit(s) fail(s) to comply with these conditions, the participation in the Service of the concerned Technical Unit(s) and the corresponding remuneration as set in Art. II.8.3 will be suspended until compliance has been fully restored. c) Before the beginning of Service delivery with a Technical Unit, the VSP of this Technical Unit must perform a Communication Test to verify the correct exchange of messages as per Art. II.5.4