Common use of Confirmation of Order Clause in Contracts

Confirmation of Order. The contract between ▇▇▇▇▇ and the Buyer is only concluded (i) after receipt by ▇▇▇▇▇ of the Buyer’s written signing for acceptance of the written Confirmation of Order (hereinafter referred to as “CO”) sent to the Buyer by ▇▇▇▇▇; or (ii) after 7 working days starting from the Buyer’s receipt of the CO without any written objections and/or written modification proposals and/or written integrations of the above mentioned CO sent to Calvi by the Buyer by registered letter with advice of receipt within the above mentioned term. Any written proposals of modification and/or integration of the CO shall be submitted to a new acceptance by Calvi by sending a new CO according to the above mentioned procedure. The conclusion of the contract according to the above mentioned procedure implies for both parties the complete acceptance and consequent complete application of the CO and of these GTCS as well as the simultaneous renunciation of the application of the Buyer’s general terms to the contract. Any order and/or modification of order transmitted orally and/or by phone by the Buyer shall be confirmed in writing by the Buyer himself to be considered binding and only after this written confirmation Calvi will send the relevant CO, in case of acceptance of the order and/or of the modification of order. Any preliminary documents, projects, supplying details or further documentation, even on Calvi forms, shall not be considered binding for Calvi, if not specifically undersigned and indicated in the CO. The technical information about Products included in catalogues, price lists, circulars or other brochures drawn up by the Company as well as the characteristics of samples are purely unbinding indications, unless specifically indicated and signed in the CO. Calvi reserves, anyway, the right to modify at any time the construction details of their products in order to improve their performances, by previous notice to the Buyer in case of substantial modifications (for example modifications concerning the installation procedure, the characteristics of interchangeability of products, etc.

Confirmation of Order. The contract between ▇▇▇▇▇ Sipa and the Buyer is only concluded (i) after receipt by ▇▇▇▇▇ of the Buyer’s written signing for acceptance of the written Confirmation of Order (hereinafter referred to as “CO”) sent to the Buyer by ▇▇▇▇▇; or (ii) after 7 working days starting from the Buyer’s receipt of the CO without any written objections and/or written modification proposals and/or written integrations of the above mentioned CO sent to Calvi Sipa by the Buyer by registered letter with advice of receipt within the above mentioned term. Any written proposals of modification and/or integration of the CO shall be submitted to a new acceptance by Calvi Sipa by sending a new CO according to the above mentioned procedure. The conclusion of the contract according to the above mentioned procedure implies for both parties the complete acceptance and consequent complete application of the CO and of these GTCS as well as the simultaneous renunciation of the application of the Buyer’s general terms to the contract. Any order and/or modification of order transmitted orally and/or by phone by the Buyer shall be confirmed in writing by the Buyer himself to be considered binding and only after this written confirmation Calvi Sipa will send the relevant CO, in case of acceptance of the order and/or of the modification of order. Any preliminary documents, projects, supplying details or further documentation, even on Calvi Sipa forms, shall not be considered binding for CalviSipa, if not specifically undersigned and indicated in the CO. The technical information about Products included in catalogues, price lists, circulars or other brochures drawn up by the Company as well as the characteristics of samples are purely unbinding indications, unless specifically indicated and signed in the CO. Calvi Sipa reserves, anyway, the right to modify at any time the construction details of their products in order to improve their performances, by previous notice to the Buyer in case of substantial modifications (for example modifications concerning the installation procedure, the characteristics of interchangeability of products, etc.

Confirmation of Order. The contract between ▇▇▇▇▇ and the Buyer is only concluded (i) after receipt by ▇▇▇▇▇ of the Buyer’s written signing for acceptance of the written Confirmation of Order (hereinafter referred to as “CO”) sent to the Buyer by ▇▇▇▇▇; or (ii) after 7 working days starting from the Buyer’s receipt of the CO without any written objections and/or written modification proposals and/or written integrations of the above mentioned CO sent to Calvi ▇▇▇▇▇ by the Buyer by registered letter with advice of receipt within the above mentioned term. Any written proposals of modification and/or integration of the CO shall be submitted to a new acceptance by Calvi ▇▇▇▇▇ by sending a new CO according to the above mentioned procedure. The conclusion of the contract according to the above mentioned procedure implies for both parties the complete acceptance and consequent complete application of the CO and of these GTCS as well as the simultaneous renunciation of the application of the Buyer’s general terms to the contract. Any order and/or modification of order transmitted orally and/or by phone by the Buyer shall be confirmed in writing by the Buyer himself to be considered binding and only after this written confirmation Calvi ▇▇▇▇▇ will send the relevant CO, in case of acceptance of the order and/or of the modification of order. Any preliminary documents, projects, supplying details or further documentation, even on Calvi ▇▇▇▇▇ forms, shall not be considered binding for Calvi▇▇▇▇▇, if not specifically undersigned and indicated in the CO. The technical information about Products included in catalogues, price lists, circulars or other brochures drawn up by the Company as well as the characteristics of samples are purely unbinding indications, unless specifically indicated and signed in the CO. Calvi ▇▇▇▇▇ reserves, anyway, the right to modify at any time the construction details of their products in order to improve their performances, by previous notice to the Buyer in case of substantial modifications (for example modifications concerning the installation procedure, the characteristics of interchangeability of products, etc.

Confirmation of Order. The contract between ▇▇▇▇▇ Sipa and the Buyer is only concluded (i) after receipt by ▇▇▇▇▇ Sipa of the Buyer’s written signing for acceptance of the written Confirmation of Order (hereinafter referred to as “CO”) sent to the Buyer by ▇▇▇▇▇Sipa; or (ii) after 7 working days starting from the Buyer’s receipt of the CO without any written objections and/or written modification proposals and/or written integrations of the above mentioned CO sent to Calvi Sipa by the Buyer by registered letter with advice of receipt within the above mentioned term. Any written proposals of modification and/or integration of the CO shall be submitted to a new acceptance by Calvi Sipa by sending a new CO according to the above mentioned procedure. The conclusion of the contract according to the above mentioned procedure implies for both parties the complete acceptance and consequent complete application of the CO and of these GTCS as well as the simultaneous renunciation of the application of the Buyer’s general terms to the contract. Any order and/or modification of order transmitted orally and/or by phone by the Buyer shall be confirmed in writing by the Buyer himself to be considered binding and only after this written confirmation Calvi Sipa will send the relevant CO, in case of acceptance of the order and/or of the modification of order. Any preliminary documents, projects, supplying details or further documentation, even on Calvi Sipa forms, shall not be considered binding for CalviSipa, if not specifically undersigned and indicated in the CO. The technical information about Products included in catalogues, price lists, circulars or other brochures drawn up by the Company as well as the characteristics of samples are purely unbinding indications, unless specifically indicated and signed in the CO. Calvi Sipa reserves, anyway, the right to modify at any time the construction details of their products in order to improve their performances, by previous notice to the Buyer in case of substantial modifications (for example modifications concerning the installation procedure, the characteristics of interchangeability of products, etc.

Confirmation of Order. The contract between ▇▇▇▇▇ and the Buyer is only concluded (i) after receipt by ▇▇▇▇▇ of the Buyer’s written signing for acceptance of the written Confirmation of Order (hereinafter referred to as “CO”) sent to the Buyer by ▇▇▇▇▇; or (ii) after 7 working days starting from the Buyer’s receipt of the CO without any written objections and/or written modification proposals and/or written integrations of the above mentioned CO sent to Calvi ▇▇▇▇▇ by the Buyer by registered letter with advice of receipt within the above mentioned term. Any written proposals of modification and/or integration of the CO shall be submitted to a new acceptance by Calvi ▇▇▇▇▇ by sending a new CO according to the above mentioned procedure. The conclusion of the contract according to the above mentioned procedure implies for both parties the complete acceptance and consequent complete application of the CO and of these GTCS as well as the simultaneous renunciation of the application of the Buyer’s general terms to the contract. Any order and/or modification of order transmitted orally and/or by phone by the Buyer shall be confirmed in writing by the Buyer himself to be considered binding and only after this written confirmation Calvi ▇▇▇▇▇ will send the relevant CO, in case of acceptance of the order and/or of the modification of order. Any preliminary documents, projects, supplying details or further documentation, even on Calvi ▇▇▇▇▇ forms, shall not be considered binding for Calvi▇▇▇▇▇, if not specifically undersigned and indicated in the CO. The technical information about Products included in cataloguesProductsincluded incatalogues, price lists, circulars or other circularsorother brochures drawn up by the Company as well as the characteristics of samples are purely unbinding indications, unless specifically indicated and signed in the CO. Calvi ▇▇▇▇▇ reserves, anyway, the right to modify at any time the construction details of their products in order to improve their performances, by previous notice to the Buyer in case of substantial modifications (for example modifications concerning the installation procedure, the characteristics of interchangeability of products, etc.

Confirmation of Order. The contract between ▇▇▇▇▇ Calvi and the Buyer is only concluded (i) after receipt by ▇▇▇▇▇ Calvi of the Buyer’s written signing for acceptance of the written Confirmation of Order (hereinafter referred to as “CO”) sent to the Buyer by ▇▇▇▇▇Calvi; or (ii) after 7 working days starting from the Buyer’s receipt of the CO without any written objections and/or written modification proposals and/or written integrations of the above mentioned CO sent to Calvi by the Buyer by registered letter with advice of receipt within the above mentioned term. Any written proposals of modification and/or integration of the CO shall be submitted to a new acceptance by Calvi by sending a new CO according to the above mentioned procedure. The conclusion of the contract according to the above mentioned procedure implies for both parties the complete acceptance and consequent complete application of the CO and of these GTCS as well as the simultaneous renunciation of the application of the Buyer’s general terms to the contract. Any order and/or modification of order transmitted orally and/or by phone by the Buyer shall be confirmed in writing by the Buyer himself to be considered binding and only after this written confirmation Calvi will send the relevant CO, in case of acceptance of the order and/or of the modification of order. Any preliminary documents, projects, supplying details or further documentation, even on Calvi forms, shall not be considered binding for Calvi, if not specifically undersigned and indicated in the CO. The technical information about Products included in catalogues, price lists, circulars or other brochures drawn up by the Company as well as the characteristics of samples are purely unbinding indications, unless specifically indicated and signed in the CO. Calvi reserves, anyway, the right to modify at any time the construction details of their products in order to improve their performances, by previous notice to the Buyer in case of substantial modifications (for example modifications concerning the installation procedure, the characteristics of interchangeability of products, etc.