Construction Interfaces Clause Samples

Construction Interfaces. Except as provided in the [APSA/EPC CONTRACT], until the Substantial Completion Date [NAME] and its contractors shall be responsible for and have sole control over the construction of Unit 2, except for interconnections with Unit 1 and the Common Facilities. Beginning on the Substantial Completion Date, PacifiCorp shall have control over the Facility in accordance with the terms and conditions of the [APSA/EPC CONTRACT]. The [NAME] shall coordinate with PacifiCorp all activities to be performed under the [APSA/EPC CONTRACT] pursuant to this Agreement, particularly if such activities may require taking Unit 1 off-line or have a substantial possibility of causing an outage at Unit 1. [NAME] shall be responsible for erecting a temporary and movable construction fence (the “Construction Fence”) on the Site for the purpose of separating the Unit 2 construction area (the “Construction Area”), which is initially depicted by the cross- hatched area on Exhibit “C” attached hereto, from the rest of the Facility, including ▇▇▇▇ ▇, the switchyard and the Common Facilities. The Construction Fence may be moved and relocated as necessary with the prior written consent of PacifiCorp following the completion of certain phases of construction for the purpose of accessing other areas of the Facility, all as set out in the Project Schedule. During the Term, [NAME] will be in control of the Construction Area and will maintain a separate gate for access to the Construction Area. At the time of Substantial Completion, the Construction Area will be reduced to [NAME]’s staging and laydown area and separate gate, and shall not include any Facilities necessary for operation of ▇▇▇▇ ▇, ▇▇▇▇ ▇ or the Common Facilities. [NAME] shall at all times utilize and cause its contractors, subcontractors, personnel and other persons allowed at any part of the Facility by Contractor to utilize only [NAME]’s separate gate to the Construction Area. 3.2 [NAME]’s Access to PacifiCorp’s Area.‌ [NAME] shall provide PacifiCorp with reasonable notice of its need to access PacifiCorp’s Area for performance of work activities associated with the Common Facilities. [NAME] and PacifiCorp shall agree on a schedule for the performance of all work activities in PacifiCorp’s Area consistent with the Project Schedule. PacifiCorp shall arrange for any safety instruction and workplace policy training deemed appropriate by PacifiCorp for [NAME]’s personnel prior to [NAME]’s personnel being allowed in PacifiCorp’s Are...
View Source
Construction Interfaces 
View Source

Related to Construction Interfaces

  • Installation When installation is required, the Contractor shall be responsible for placing and installing the Commodities or parts in the required locations at no additional charge. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the Commodity or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, tools, rigging, labor, and materials required to install or replace the Commodities or parts in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Construction materials (1) The restrictions of section 1605 of the American Recovery and Reinvestment Act of 2009 (Pub. L. 111-5) (Recovery Act) do not apply to Recovery Act designated country manufactured construction material. The restrictions of the Buy American statute do not apply to designated country unmanufactured construction material. Consistent with U.S. obligations under international agreements, this clause implements--

  • Construction of the Tenant Improvements (a) Tenant shall construct and install the Tenant Improvements in a good and workmanlike manner, in compliance with all Laws and in accordance with this Exhibit B. Tenant’s proposed architect/engineer, general contractor, and fire protection, plumbing, HVAC and electrical subcontractors are subject to Landlord’s prior approval. Promptly following the selection and approval of the architect/engineer, Tenant shall forward to said architect/engineer (and copy Landlord on the transmittal) Landlord’s building standards heretofore delivered to Tenant, and Tenant shall cause said architect/engineer to comply with said building standards. Promptly following the selection and approval of the general contractor, Tenant shall forward to said general contractor (and copy Landlord on the transmittal) Landlord’s fire protection, plumbing, HVAC and electrical specifications and Landlord’s rules of conduct, all of which have been delivered to Tenant prior to the date of this Lease, and Tenant shall cause said general contractor to comply with said specifications and rules of conduct. At Landlord’s request, Tenant shall coordinate a meeting among Landlord (who will reasonably make its representative available for such meeting), Tenant and Tenant’s general contractor to discuss the Building systems and other matters related to the construction of the Tenant Improvements. (b) Promptly following the date hereof, Tenant shall prepare and submit to Landlord a set of permittable construction drawings (the “CDs”), based on the preliminary plans attached hereto as Exhibit B-2 and made a part hereof (the “Preliminary Plans”), covering all work to be performed by Tenant in constructing the Tenant Improvements. Tenant shall have no right to make any Tenant Improvements that would materially alter the exterior appearance of the Building or the Building systems without Landlord’s prior approval. Landlord shall have fifteen (15) days after receipt of the CDs in which to review the CDs and in which to give Tenant written notice of its approval of the CDs or its requested changes to the CDs in reasonably sufficient detail so as to allow Tenant to make the requested changes (provided that Landlord shall not be permitted to request a change that is inconsistent with the Preliminary Plans). If Landlord requests any changes to the CDs, Tenant shall make such changes and shall, within fifteen (15) days of its receipt of Landlord’s requested changes (if any), submit the revised portion of the CDs to Landlord. Landlord shall have five (5) business days after receipt of the revised CDs in which to review said revised CDs and in which to give to Tenant written notice of its approval of the revised CDs or its requested changes thereto. This process shall continue until such time, if at all, that Landlord approves the CDs in accordance with this Section 2. Tenant shall at all times in its preparation of the CDs, and of any revisions thereto, act reasonably and in good faith. Landlord shall at all times in its review of the CDs, and any revisions thereto, act reasonably and in good faith.

  • Construction Work The regulation at 41 C.F.R. § 60-1.3 defines “construction work” as the construction, rehabilitation, alteration, conversion, extension, demolition or repair of buildings, highways, or other changes or improvements to real property, including facilities providing utility services. The term also includes the supervision, inspection, and other onsite functions incidental to the actual construction.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at a P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.