Construction Scope of Work Sample Clauses
The Construction Scope of Work clause defines the specific tasks, responsibilities, and deliverables that the contractor is required to complete as part of a construction project. It typically outlines the types of work to be performed, the materials to be used, and any relevant standards or specifications that must be met. By clearly delineating what is included and excluded from the contractor’s obligations, this clause helps prevent misunderstandings and disputes over project expectations, ensuring that both parties have a shared understanding of the work to be completed.
POPULAR SAMPLE Copied 2 times
Construction Scope of Work. The construction scope of work shall include the following: Site preparation; Site development; Installation of fill and construction of embankments; Construction of the levee; Erosion and sediment control; Formation of foundations for Equipment, structures, pipe-racks and pipe tracks, and buildings, including piling and/or soils mixing where required; Installation of underground piping and drainage systems; Finished area grading and paving; Installation of structural components of the Project; Installation of the vessels, tanks, buildings, ground flares, and other Equipment; Installation of the rotating equipment, motors, turbines, compressors, pumps and blowers; Installation of piping components and systems; Installation of electrical substations and installation of power distribution Equipment; Installation of the fire water system; Installation of the power and control cabling systems; Installation of the instrument and control devices and systems; Installation of telecommunication & security equipment and systems; Installation of the instrument, control devices and systems and telecommunication & security systems cabling systems; Installation of Electrical, ICSS, Instrument, Telecom & Security Fiber Optic cabling systems; Application of paint, insulation, and fireproofing systems; Installation of permanent plant buildings, roads, security fences; Provide landscaping design and implement. The extent of landscaping and green spaces, type of vegetation used, etc. will be determined during detailed design Installation, maintenance and removal of temporary facilities; Provision of temporary facilities for the supply of electricity, water, and telephone / communication systems for construction of the works; Provision of temporary facilities for the disposal of sewage from the construction worksite up to that time that connection to the new sanitary effluent return line to local sewage treatment plant is available; and Contractor shall ensure temporary strainers or other methods of protecting Equipment are included for all Equipment that is susceptible to damage from construction debris. Contractor shall follow suppliers’ recommendations as to which Equipment this applies as a minimum requirement. Construction works include the following marine construction activities: Dredging for the MOF; Construction of the LNG carrier loading berth number 1, and the MOF (loading berth 1 will be constructed primarily...
Construction Scope of Work. Funds awarded under this agreement will be used for the installation of sedimentation and erosion control measures and site activities to include but not limited to mass grading of the 11.66 acre site, site preparation and installation of new streets and infrastructure necessary to serve the Phase 2 development which consists of approximately seven acres to include sidewalk, storm drainage, water distribution and sanitary sewer collection, street trees, as well as coordination with private utilities for street lights and future utility services. It also includes like improvements to serve the future development on the remaining site. The “Construction Scope of Work” is described more particularly in the construction documents attached to or referenced in the form of construction contract between Site Developer and ▇.▇. ▇▇▇▇▇▇▇ Infrastructure, LLC (the “Contractor”) attached as Attachment D (the “Construction Contract”). The City has approved the form and content of the Construction Contract, including the contract amount of $3,500,000.00 and has approved the identity of the Contractor, which was selected as the lowest responsible bidder pursuant to a process previously approved by the City. Construction is scheduled to begin by April 15, 2016 with a 180 day overall completion schedule, subject to extension by Site Developer in accordance with the terms of the Construction Contract or otherwise with the prior written approval of the City. The Site Developer will be responsible for managing the day to day activities of the Construction Scope of Work and for overseeing 3rd party professional service providers which will provide specific construction management services and will earn a management fee in the amount of 9% of construction costs. The management fee will be paid pro rata to construction and 3rd party costs approved and submitted with each monthly draw.
Construction Scope of Work. Funds awarded under this agreement will be used for the installation of sedimentation and erosion control measures, demolition and removal of the existing streets and infrastructure, site activities to include but not limited to mass grading of the 19.83 acres site, site preparation and installation of new streets and infrastructure necessary to serve the Phase 1 development which consists of approximately seven acres to include sidewalk, storm drainage, water distribution and sanitary sewer collection, street trees, as well as coordination with private utilities for street lights and future utility services and the removal of contaminated debris as recommended in the Environmental Specifications and Report. The “Construction Scope of Work” is described more particularly in the construction documents attached to or referenced in the form of construction contract between Developer and ▇.▇. ▇▇▇▇▇▇▇ Infrastructure, LLC (the “Contractor”) attached as Attachment D (the “Construction Contract”). The City has approved the form and content of the Construction Contract, including the contract amount of $5,353,380.00 and has approved the identity of the Contractor, which was selected as the lowest responsible bidder pursuant to a process previously approved by the City. Construction is scheduled to begin July 1, 2012 with a 210 day completion schedule, subject to extension by Developer in accordance with the terms of the Construction Contract or otherwise with the prior written approval of the City. The Developer will be responsible for managing the day to day activities of the Construction Scope of Work and will earn a management fee in the amount of $400,000 The management fee will be paid as follows: 40% of the management fee will be paid upon completion of the site preparation and environmental remediation work on the Phase 1 portion of the site (approximately seven acres at the north end of the site) as detailed in the attached construction schedule (Attachment E); 20% of the management fee will be paid at the 60% completion; 20% will be paid at 80% completion with the remaining 20% paid at substantial completion and approval of as-builts by the City of Durham.
Construction Scope of Work. A. Prior to commencing Construction, Contractor shall comply with the initial schedule requirements set forth in the General Conditions.
B. Contractor shall complete the Construction pursuant to the Construction Documents as amended subject to any additional DSA or other regulatory approvals as may be required, performing all work set forth in the Scope of Work, and shall make reasonable efforts in scheduling to prevent disruption to classes.
C. Contractor shall be responsible for complying with all applicable building codes, including without limitation mechanical codes, electrical codes, plumbing codes and fire codes, each of the latest edition, required by the regulatory agencies and for arranging and overseeing all necessary inspections and tests including inspections by the DSA or regulatory agencies, permits and occupancy permits, and ensuring compliance with any Federal and State laws, including, but not limited to, safety procedures and requirements, and construction employee training programs which cover among other items, hazardous chemicals and materials.
D. Contractor shall establish procedures for the protection of all existing structures, equipment, utilities, and other existing improvements, both on-site and off-site. Contractor assumes all risk of loss of vandalism, theft of property or other property damage (“Vandalism”) which occurs at a site at which Contractor is undertaking construction of the Project. Contractor assumes all risk of loss which occurs where Contractor is undertaking construction of the Project from causes due to negligence or misconduct by Contractor, its officers, employees, subcontractors, licensees and invitees. Contractor shall replace District property damaged by such Vandalism or theft or compensate the District for such loss, including payment of out of pocket expenses such as insurance deductibles the District might incur under such circumstances.
E. Contractor shall develop a mutually agreed upon program with the District to ▇▇▇▇▇ and minimize noise, dust, and disruption to normal activities at the existing facilities at the School Facility, including procedures to control on-site noise, dust, and pollution during construction.
F. The District shall cause the appropriate professionals to stamp and sign, as required, the original Construction Documents or parts thereof and coordinate the Project’s design with all utilities.
G. Contractor shall, for the benefit of the Subcontractors, attend pre-construction orien...
Construction Scope of Work. The construction scope of work shall include the following: Erosion and sediment control; Formation of foundations for Equipment, structures, pipe-racks and pipe tracks, and buildings, including piling and/or soils mixing where required; Installation of underground piping and drainage systems; Finished area grading and paving; Installation of structural components of the Project; Installation of the vessels, tanks, buildings, and other Equipment; Installation of the rotating equipment, motors, turbines, compressors, pumps and blowers;
Construction Scope of Work. A. Prior to commencing Construction, Builder shall comply with the initial schedule requirement set forth in Section 10.E. of this Agreement.
B. Builder shall complete the Construction pursuant to the Construction Documents as amended, performing all work set forth in the Scope of Work (Exhibit “A” to this Agreement).
(1) Builder shall be responsible for complying with all applicable building codes, mechanical code, electrical code, plumbing code and fire code, latest edition, required by DSA and for arranging and overseeing all necessary inspections and tests including inspections by the DSA, permits and occupancy permits, and ensuring compliance with any Federal and State laws, including, but not limited to, safety procedures and requirements, and construction employee training programs which cover among other items, hazardous chemicals and materials.
(2) All buildings constructed pursuant to this Agreement shall be considered a “school building” pursuant to the Field Act as set forth in Article 3 (commencing with section 17280) of Chapter 3 of Part 10.5 of the Education Code, and shall be compliant with those provisions.
D. Builder shall establish procedures for the protection of all existing structures, equipment, utilities, and other existing improvements, both on-site and off-site. Builder assumes all risk of loss of vandalism, theft of property or other property damage ("vandalism") which occurs at a Site at which Builder is undertaking construction of the Project, from causes due to negligence or misconduct by Builder, its officers, employees, subcontractors, licensees and invitees. Builder shall replace District property damaged by such vandalism or theft or compensate the District for such loss, including payment of out of pocket expenses such as insurance deductibles the District might incur under such circumstances.
E. Builder shall develop a mutually agreed-upon program with the District to ▇▇▇▇▇ and minimize noise, dust, and disruption on the Site, including procedures to control on-site noise, dust, and pollution during construction.
F. The District shall perform any required site mitigation or remediation on the Site at its sole cost, unless such site mitigation or remediation is necessitated by any of the conditions described in Section 27 of this Agreement, in which event the provisions of that Section 27 shall govern.
G. District shall cause the appropriate professionals to stamp and sign, as required, the original Construction Documents...
Construction Scope of Work. The scope of the construction services to be performed by ESCO pursuant to this Contract shall be determined by Owner and ESCO at the conclusion of the Design Phase and set forth in the Construction Phase Amendment.
Construction Scope of Work. The Design-Builder agrees, at its own cost and expense as outlined within the Final GMP, to do all work necessary and required to fully, timely and properly complete the construction of the Project in strict accordance with the Contract Documents in a professional and workmanlike manner, free and clear of all claims, liens, and charges whatsoever, in the manner and under the conditions specified, and within the schedule, set forth in the Contract Documents, including without limitation, all articles of the Design-Build Services Agreement and the General Conditions.
Construction Scope of Work