Contractor Pollution Liability Clause Samples

The Contractor Pollution Liability clause establishes the requirement for the contractor to maintain insurance coverage specifically for pollution-related incidents arising from their work. This clause typically mandates that the contractor obtain and keep in force a pollution liability insurance policy, which covers claims for bodily injury, property damage, or environmental harm caused by pollutants released during the contractor’s operations. Its core practical function is to allocate the financial risk of pollution events to the contractor and their insurer, ensuring that any damages or cleanup costs resulting from pollution are covered and do not fall on the project owner.
Contractor Pollution Liability. If the work involves abatement, removal, repair, replacement, enclosure, encapsulation and/or disposal of any pollutants, which includes but are not limited to, petroleum, petroleum product, hazardous material or substance including asbestos, lead, fungus and those as defined by applicable state and federal laws and regulations, the Contractor shall procure, or otherwise obtain through an approved subcontractor, and maintain in full force and effect throughout the term of the Contract, and for two years after completion hereof providing coverage for bodily injury and property damage, including loss of use of damaged property or of property that has not been physically injured. Such policy shall provide coverage for actual, alleged or threatened emission, discharge, dispersal, seepage, release or escape of pollutants, including any loss, cost or expense incurred as a result of any cleanup of pollutants or in the investigation, settlement or defense of any claim, suit or proceedings against the State, OGS or any authorized user arising from the Contractor’s work. The People of the State of New York, the New York State Office of General Services, any entity authorized by law or regulation to use any Contract resulting from this solicitation as an Authorized User and their officers, agents, and employees as additional insureds and the coverage shall be primary. This requirement applies to mold as well, if excluded in the Commercial General Liability policy. If automobiles are to be used for transporting hazardous materials, the Contractor shall provide pollution liability broadened coverage for covered autos (endorsement CA 99 48 03 06 or CA 00 12 03 06) as well as proof of MCS 90.
View SourceView Similar (6)
Contractor Pollution Liability. The Concessionaire shall provide or cause to be provided contractor pollution liability insurance of not less than $10,000,000 any one claim and in the aggregate in any one annual period of insurance and a deductible that does not exceed $500,000.
View SourceView Similar (5)
Contractor Pollution Liability. (CPL) policy with a limit no less than $2,000,000 per claim. Coverage shall include bodily injury, property damage, including loss of use of property, clean-up costs, defense (including costs and expenses incurred in the investigation, defense, or settlement of claims), products and/or completed operations, and contractual liability. Coverage shall also be provided for transport of waste and non-owned disposal sites, if Contractor is disposing of waste. 4.1 The Met Council shall also be listed as an additional insured on such policy. 4.2 If policy is written on a claims-made basis, then retroactive date must precede the earlier of either i.) the effective date of this contract, or ii.) the date work begins and shall provide an extended reporting period.
View SourceView Similar (2)
Contractor Pollution Liability. Limit of $10M per Pollution Condition
View Source
Contractor Pollution Liability. Limit - $2,000,000
View Source
Contractor Pollution Liability. If services performed or provided include activities that could result in or give rise to a contamination or pollution incident, or a release of Hazardous Materials, then Contractor shall purchase and maintain in force, or cause to be purchased and maintained in force, insurance covering loss and liability arising out of or relating to such performance of services. Insurance shall cover and include claims alleging bodily injury, property damage, or clean-up which shall include investigation, response, removal, remediation and neutralization of the pollution condition for both on and off site claims or to any other location to which Hazardous Materials were transported from the Project site with limits not less than the limits in the chart above. Contractors Pollution Liability insurance may be written on a claims-made basis provided such policy shall either (a) be renewed annually for a period of not fewer than ten (10) years after substantial completion of the services under this Request for Proposal with substantially the same terms and conditions or (b) include an extended reporting period endorsement or clause providing not less than ten (10) years within which a claim may be made under the policy respecting performance of the services; the retroactive date of any insurance policy required herein that is issued on a claims-made basis shall coincide with or precede the commencement of this Request for Proposal, whether such insurance is existing, renewed or replaced; the cost for such ten (10) year period shall be borne exclusively by Contractor; provided further that if such insurance is written on a claims-made basis then the per occurrence limits stated above shall apply per incident; limits of liability shall apply on a per-project basis, if commercially feasible.
View Source
Contractor Pollution Liability. If the work involves abatement, removal, repair, replacement, enclosure, encapsulation and/or disposal of any pollutants, which includes but are not limited to, petroleum, petroleum product, hazardous materials or substances including asbestos, lead, fungus and those as defined by applicable state and federal laws and regulations, the Contractor shall procure, or otherwise obtain through an approved subcontractor, and maintain in full force and effect throughout the term of any Contract resulting from this Solicitation/Contract, and for two years after completion hereof, providing coverage for bodily injury and property damage, including loss of use of damaged property or of property that has not been physically injured. Such policy shall provide coverage for actual, alleged or threatened emission, discharge, dispersal, seepage, release or escape of pollutants, including any loss, cost or expense incurred as a result of any cleanup of pollutants or in the investigation, settlement or defense of any claim, suit, or proceedings against The People of the State of New York, the New York State Office of General Services and any Authorized User of any Contract resulting from this Solicitation and their officers, agents, and employees, arising from the Contractor’s work. This requirement applies to mold as well, if excluded in the Commercial General Liability policy.
View Source
Contractor Pollution Liability. The Pollution Liability insurance shall have a limit of not less than $2 million.
View Source

Related to Contractor Pollution Liability

  • Contractor’s Pollution Liability insurance covering losses caused by pollution conditions that arise from the operations of the Contractor. Contractors Pollution Liability insurance shall be written in an amount of at least $1,000,000 per loss, with an annual aggregate of at least $1,000,000. Contractors Pollution Liability shall cover bodily injury, property damage, cleanup costs and defense including costs and expenses incurred in the investigation, defense, or settlement of claims. If the Contractors Pollution Liability insurance is written on a claims-made basis, the Contractor warrants that any retroactive date applicable to coverage under the policy precedes the effective date of this contract; and that continuous coverage will be maintained or an extended discovery period will be exercised for a period of three (3) years beginning from the time that work under the contract is completed. The City shall be named by endorsement as an additional insured on the Contractors Pollution Liability insurance policy. If the scope of services as defined in this contract includes the disposal of any hazardous materials from the job site, the Contractor must furnish to the City evidence of Pollution Liability insurance maintained by the disposal site operator for losses arising from the insured facility accepting waste under this contract. Coverage certified to the Public Entity under this paragraph must be maintained in minimum amounts of $1,000,000 per loss, with an annual aggregate of at least $1,000,000. Pollution Liability coverage at least as broad as that provided under ISO Pollution Liability- Broadened Coverage for Covered Autos Endorsement CA 99 48 shall be provided, and the Motor Carrier Act Endorsement (MCS 90) shall be attached.

  • Pollution Liability Contractors shall provide proof of pollution liability insurance arising out of all operations of the Contractors and subcontractors, due to discharge, dispersal, release, or escape of contaminants or pollutants into or upon land, the atmosphere or any watercourse or body of water with bodily injury and property damage limits of not less than $1,000,000 per occurrence and $2,000,000 annual aggregate for: 1) Bodily injury, sickness, disease, mental anguish or shock sustained by any person, including death; 2) Property damage including physical injury to or destruction of tangible property including the resulting loss of use thereof, clean-up costs, and the loss of use of tangible property that has not been physically injured or destroyed; 3) Defense including loss adjustment costs, charges and expenses incurred in the investigation, adjustment or defense of claims for such compensatory damages; 4) Definition of pollution conditions shall include asbestos, lead, and mold so that these risks are covered if caused by Contractor/successful candidate’s work or operations. 5) Coverage is required on an occurrence form.

  • Contractor’s Pollution Liability Insurance If specified in Schedule A, the Contractor shall maintain, or cause the Subcontractor doing such Work to maintain, Contractors Pollution Liability Insurance covering bodily injury and property damage. Such insurance shall provide coverage for actual, alleged or threatened emission, discharge, dispersal, seepage, release or escape of pollutants (including asbestos), including any loss, cost or expense incurred as a result of any cleanup of pollutants (including asbestos) or in the investigation, settlement or defense of any claim, action, or proceedings arising from the operations under this Contract. Such insurance shall be in the Contractor’s name and list the City as an Additional Insured and any other entity specified in Schedule A. Coverage shall include, without limitation, (a) loss of use of damaged property or of property that has not been physically injured, (b) transportation, and (c) non-owned disposal sites.

  • Pollution Liability Insurance Environmental Impairment Liability Insurance shall be written on a Contractor’s Pollution Liability form or other form acceptable to the City providing coverage for liability arising out of sudden, accidental, and gradual pollution and remediation. The policy limit shall be no less than $1,000,000 dollars per claim and in the aggregate. All activities contemplated in this Agreement shall be specifically scheduled on the policy as “covered operations”. The policy shall provide coverage for the hauling of waste from the Project site to the final disposal location, including non-owned disposal sites.

  • Insurance, Subcontractor's Public Liability and Property Damage The Contractor shall require each of its subcontractors to secure and maintain during the life of the subcontract, insurance of the type specified in this Contract, or, the Contractor may insure the activities of its subcontractors in the Contractor’s policy, as specified in this Contract.