DEPTH Clause Samples
The DEPTH clause defines the required or permitted depth for certain work or installations specified in a contract, such as excavation, trenching, or laying utilities. It typically sets minimum or maximum depth measurements that must be adhered to, and may outline procedures for verifying compliance or addressing unforeseen subsurface conditions. By establishing clear depth requirements, this clause helps prevent disputes over the extent of work performed and ensures that the project meets safety, regulatory, or functional standards.
POPULAR SAMPLE Copied 2 times
DEPTH. Subject to the right of the Partnership to direct the stoppage of work at any time (as provided in paragraph 7), the Partnership Well▇ ▇▇▇ll be drilled to the depth as specified in Exhibit "1" or to the depth at which the production casing (oil string) is set, whichever depth is first reached, which depth is hereinafter referred to as the "Contract Depth."
DEPTH. Subject to the right of the Partnership to direct the stoppage of work at any time (as provided in paragraph 7), the Texas and Kentucky Venture Well▇ ▇▇▇ll be drilled to the depth as specified in Exhibit "1" or to the depth at which the production casing (oil string) is set, whichever depth is first reached, which depth is hereinafter referred to as the "Contract Depth."
DEPTH. All of the ▇▇▇▇▇ to be drilled under this Agreement (c) shall be:
(i) drilled and completed (or plugged) in accordance with the generally accepted and customary oil and gas field practices and techniques then prevailing in the geographical area of the Well Locations; and
(ii) drilled to a depth sufficient to test thoroughly the objective formation or the deepest assigned depth, whichever is less.
DEPTH. Contractor confirms that the Drilling Unit shall be capable of drilling ▇▇▇▇▇ upto a maximum depth of Meters.
DEPTH. Spacer lengths under hydrant body shall be fitted to permit top of false- spindle being 75 mm minimum to 225mm maximum below finished surface of footpath.
DEPTH. Subject to provisions hereof, the ▇▇▇▇▇ shall be drilled to the depth specified below: Turnkey Depth: The well shall be drilled up to 2000 feet or ____________ of the _________________ formation, or the depth at which the _____________ inch casing or liner set, whichever is the lesser depth, which will herein be referred to as the Turnkey Depth.
DEPTH. The depth of each well to be drilled hereunder will be specified by COMPANY, which COMPANY may amend from time to time. The depth so specified is hereinafter referred to as the “Contract Depth”, subject to the right of COMPANY to direct, at any time, a stoppage of Work at a lesser depth.
DEPTH. Subject to the right of the Partnership to direct the stoppage of work at any time (as provided in paragraph 7), the Prospect ▇▇▇▇▇ shall be drilled to the depth as specified in Exhibit "1" or to the depth at which the production casing (production string) is set, whichever depth is first reached, which depth is hereinafter referred to as the "Contract Depth."
DEPTH. Limited to the interval between the surface of the ground and the stratigraphic equivalent of the total depth drilled in the deepest Phase I Earning Well.
DEPTH. The Pipeline will be buried a minimum of 4 ½ feet (to the top of the pipe) to minimize the possibility of inadvertent third-party damage. Warning tape will be placed in the trench above the Pipeline to warn anyone excavating of the pipeline's location.