Design Certification Process Clause Samples

The Design Certification Process clause outlines the procedures and requirements for verifying and approving design documents or plans before proceeding to subsequent project phases. Typically, this clause specifies the steps for submitting designs, the criteria for review, and the roles of both the submitting and approving parties, such as requiring the contractor to provide detailed drawings for the client's review and sign-off. Its core function is to ensure that all design work meets agreed standards and expectations, thereby reducing the risk of errors, misunderstandings, or costly changes later in the project.
POPULAR SAMPLE Copied 1 times
Design Certification Process. 4.4.4.1. The Certificating Authority shall ensure that the Validating Authority receives all the relevant data and information, as defined in the Technical Implementation Procedures, necessary for the Validating Authority to become and remain familiar with the design and certification of the Civil Aeronautical Products that are subject to validation. 4.4.4.2. The Validating Authority shall issue its type certificate for an aircraft, engine or propeller when: (a) the Certificating Authority has issued its own certificate; (b) the Certificating Authority certifies to the Validating Authority that the product complies with the certification basis as set out in point 4.4.3; (c) all issues raised during the validation process conducted by the Validating Authority have been resolved; and (d) additional administrative requirements, as defined in the Technical Implementation Procedures, have been met by the applicant. 4.4.4.3. In order to obtain and maintain a Validated Design Certificate as per the provisions of this Annex, the applicant shall hold and retain at the disposal of the Certificating Authority all relevant design information, drawings and test reports, including inspection records for the certified product, in order to provide the information necessary to ensure the continued airworthiness and compliance with applicable environmental protection requirements of the product.
View SourceView Similar (3)
Design Certification Process. The Certificating Authority shall ensure that the Validating Authority receives all the relevant data and information, as defined in the Technical Implementation Procedures, necessary for the Validating Authority to become and remain familiar with the design and certification of the Civil Aeronautical Products that are subject to validation. The Validating Authority shall issue its type certificate for an aircraft, engine or propeller when: the Certificating Authority has issued its own certificate; the Certificating Authority certifies to the Validating Authority that the product complies with the certification basis as set out in paragraph 4.4.3; all issues raised during the validation process conducted by the Validating Authority have been resolved; and additional administrative requirements, as defined in the Technical Implementation Procedures, have been met by the applicant. In order to obtain and maintain a Validated Design Certificate as per the provisions of this Annex, the applicant shall hold and retain at the disposal of the Certificating Authority all relevant design information, drawings and test reports, including inspection records for the certified product, in order to provide the information necessary to ensure the continued airworthiness and compliance with applicable environmental protection requirements of the product. Validation and automatic acceptance processes Design Certificates that have been, or are in the process of being, issued by the Certificating Authority, are either automatically accepted or validated by the Validating Authority: For certificates subject to validation, the Validating Authority issues its own Certificate through a validation process implying a commensurate level of involvement, defined in accordance with the principles of paragraph 4.4.2 and as detailed in the Technical Implementation Procedures. For certificates subject to automatic acceptance, the Validating Authority recognises and accepts the Certificating Authority’s certificates without any technical investigation or validation exercise. In this case, the certificate issued by the Certificating Authority is recognised by the Validating Authority as equivalent to its own certificate issued in accordance with its legislation and procedures. The validating Authority does not issue its own corresponding certificate. Subject to the provisions of paragraph 4.4.2, the validation process, as detailed in the Technical Implementation Procedures, shall be based...
View SourceView Similar (2)

Related to Design Certification Process

  • Contractor Certification The Department may, at its option, terminate the Contract if the Contractor is found to have submitted a false certification as provided under section 287.135(5), F.S., or been placed on the Scrutinized Companies with Activities in Sudan List or the Scrutinized Companies with Activities in the Iran Petroleum Energy Sector List, or been engaged in business operations in Cuba or Syria, or to have been placed on the Scrutinized Companies that Boycott Israel List or is engaged in a boycott of Israel.

  • CHILD SUPPORT CERTIFICATION Under Section 231.006, Texas Family Code, the Engineer certifies that the individual or business entity named in this contract, bid, or application is not ineligible to receive the specified grant, loan, or payment and acknowledges that this contract may be terminated and payment may be withheld if this certification is inaccurate. If the above certification is shown to be false, the Engineer is liable to the state for attorney’s fees, the cost necessary to complete the contract, including the cost of advertising and awarding a second contract, and any other damages provided by law or the contract. A child support obligor or business entity ineligible to receive payments because of a payment delinquency of more than thirty (30) days remains ineligible until: all arrearages have been paid; the obligor is in compliance with a written repayment agreement or court order as to any existing delinquency; or the court of continuing jurisdiction over the child support order has granted the obligor an exemption from Subsection (a) of Section 231.006, Texas Family Code, as part of a court- supervised effort to improve earnings and child support payments.

  • S▇▇▇▇▇▇▇-▇▇▇▇▇ Certification Each Form 10-K with respect to the Trust shall include a S▇▇▇▇▇▇▇-▇▇▇▇▇ Certification in the form attached to this Agreement as Exhibit X required to be included therewith pursuant to the S▇▇▇▇▇▇▇-▇▇▇▇▇ Act. The Certificate Administrator, the Master Servicer, the Special Servicer, the Operating Advisor, the Asset Representations Reviewer (in the case of the Asset Representations Reviewer, solely with respect to reporting periods in which the Asset Representations Reviewer is required to deliver an Asset Review Report Summary), the Custodian and the Trustee shall provide (and (i) with respect to any Servicing Function Participant of such party that is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause such Servicing Function Participant to provide, and (ii) with respect to any other Servicing Function Participant of such party (other than any party to this Agreement), shall cause such Servicing Function Participant to provide) to the Person who signs the S▇▇▇▇▇▇▇-▇▇▇▇▇ Certification for the Trust or any Other Securitization Trust (the “Certifying Person”) no later than March 1 in the year immediately following the year as to which such Form 10-K relates or, if March 1 is not a Business Day, on the immediately following Business Day, a certification in the form attached to this Agreement as Exhibit Y-1, Exhibit Y-2, Exhibit Y-3, Exhibit Y-4, Exhibit Y-5, Exhibit Y-6, Exhibit Y-7 and Exhibit Y-8, as applicable, on which the Certifying Person, the entity for which the Certifying Person acts as an officer, and such entity’s officers, directors and Affiliates (collectively with the Certifying Person, “Certification Parties”) can reasonably rely. With respect to each Outside Serviced Mortgage Loan serviced under an Outside Servicing Agreement, the Certificate Administrator shall use commercially reasonable efforts to procure, and upon receipt deliver to the Certifying Person, a S▇▇▇▇▇▇▇-▇▇▇▇▇ back-up certification similar in form and substance to the certifications referenced in the preceding sentence, from the related Outside Servicer, the related Outside Special Servicer, the related Outside Paying Agent and the related Outside Trustee. In the event any Reporting Servicer is terminated or resigns pursuant to the terms of this Agreement, or any applicable Sub-Servicing Agreement or primary servicing agreement, as the case may be, such Reporting Servicer shall provide a certification to the Certifying Person pursuant to this Section 10.06 with respect to the period of time it was subject to this Agreement or the applicable sub-servicing or primary servicing agreement, as the case may be.

  • AS9100 Certification ‌ AS9100 Certification, specifies requirements for a quality management system to demonstrate the Contractor’s ability to consistently meet the customer requirements as well as statutory and regulatory requirements for the aerospace industry. An AS9100 Certification, is not mandatory; however, Contractors who desire to compete for work within the aerospace industry are encouraged to have AS9100 Certification, during the entire term of OASIS. The Contractor shall notify the OASIS CO, in writing, if there are any changes in the status of their AS9100 Certification, and provide the reasons for the change and copies of audits from an AS9100 Certification Body, as applicable. If only part of a Contractor’s organization is AS9100, certified, the Contractor shall make the distinction between which business units or sites and geographic locations have been certified.

  • ▇▇▇▇▇▇▇▇-▇▇▇▇▇ Certification Each Form 10-K with respect to the Trust shall include a ▇▇▇▇▇▇▇▇-▇▇▇▇▇ Certification in the form attached to this Agreement as Exhibit X required to be included therewith pursuant to the ▇▇▇▇▇▇▇▇-▇▇▇▇▇ Act. The Certificate Administrator, the Master Servicer, the Special Servicer, the Operating Advisor, the Asset Representations Reviewer (in the case of the Asset Representations Reviewer, solely with respect to reporting periods in which the Asset Representations Reviewer is required to deliver an Asset Review Report Summary), the Custodian and the Trustee shall provide (and (i) with respect to any Servicing Function Participant of such party that is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause such Servicing Function Participant to provide, and (ii) with respect to any other Servicing Function Participant of such party (other than any party to this Agreement), shall cause such Servicing Function Participant to provide) to the Person who signs the ▇▇▇▇▇▇▇▇-▇▇▇▇▇ Certification for the Trust or any Other Securitization Trust (the “Certifying Person”) no later than March 1 in the year immediately following the year as to which such Form 10-K relates or, if March 1 is not a Business Day, on the immediately following Business Day, a certification in the form attached to this Agreement as Exhibit Y-1, Exhibit Y-2, Exhibit Y-3, Exhibit Y-4, Exhibit Y-5, Exhibit Y-6, Exhibit Y-7 and Exhibit Y-8, as applicable, on which the Certifying Person, the entity for which the Certifying Person acts as an officer, and such entity’s officers, directors and Affiliates (collectively with the Certifying Person, “Certification Parties”) can reasonably rely. With respect to each Outside Serviced Mortgage Loan serviced under an Outside Servicing Agreement, the Certificate Administrator shall use commercially reasonable efforts to procure, and upon receipt deliver to the Certifying Person, a ▇▇▇▇▇▇▇▇-▇▇▇▇▇ back-up certification similar in form and substance to the certifications referenced in the preceding sentence, from the related Outside Servicer, the related Outside Special Servicer, the related Outside Paying Agent and the related Outside Trustee. In the event any Reporting Servicer is terminated or resigns pursuant to the terms of this Agreement, or any applicable Sub-Servicing Agreement or primary servicing agreement, as the case may be, such Reporting Servicer shall provide a certification to the Certifying Person pursuant to this Section 10.06 with respect to the period of time it was subject to this Agreement or the applicable sub-servicing or primary servicing agreement, as the case may be.