Design Development Services Sample Clauses

Design Development Services. 2.4.1 Design-Builder shall be responsible for the professional quality, technical accuracy, timely completion and coordination of all drawings, specifications and other design submissions required to be developed by Design-Builder under the Contract Documents and shall, without additional compensation, correct or revise any errors, omissions or other deficiencies in such design submissions. 2.4.2 Design-Builder shall, consistent with any applicable provision of the Contract Documents, provide Department with ten (10) sets of the following interim design submissions, in accordance with Part 2 (Project Technical Information and Requirements). The submissions should generally correspond to Department’s concurrent engineering process, including but not limited to: (i) Preliminary Field Inspection (PFI); (ii) Field Inspection and Right-of-Way (FI/RW); and (iii) additional interim design submissions that Department may require. On or about the time of the scheduled submissions, Design-Builder and Department shall meet and confer about the submissions, with Design-Builder identifying during such meetings, among other things, the evolution of the design and any significant changes or deviations from the Contract Documents, or, if applicable, previous design submissions. Minutes of the meetings will be maintained by Design-Builder and provided to all attendees for review. Following the design review meeting, Department shall review and provide comments on the interim design submissions (except that it will specifically approve or disapprove of the FI/RW submissions) 2.4.3 Design-Builder shall submit to Department Released for Construction Plans setting forth in detail drawings and specifications describing the requirements for construction and QA/QC activities associated with such Work, in full compliance with the Contract Documents and all Legal Requirements and Governmental Approvals. The Released for Construction Plans shall be consistent with the latest set of interim design submissions; as such submissions may have been modified in a design review meeting, as agreed upon in writing, and shall be submitted after Design-Builder has obtained all requisite Governmental Approvals associated with the Work contained in such documents. The parties shall have a design review meeting to discuss, and Department shall review and approve, the Released for Construction Plans in accordance with the procedures set forth Section 2.4.1 above. Design-Builder shall proceed with c...

Design Development Services. 60% SUBMISSION‌ This Phase shall consist of the development of the approved schematic design, including the mechanical, electrical and all other systems required for the Project, as well as recommendations for bidding packages, order of construction and timing. During this Phase, all design criteria and solutions shall be established and developed within the program requirements and budget as established by the Owner.

Design Development Services. 2.4.1 Design-Builder and Owner shall, consistent with any applicable provision of the Contract Documents, agree upon any interim design submissions that Owner may wish to review, which interim design submissions may include design criteria, drawings, diagrams and specifications setting forth the Project requirements. Such agreement may specify the percentage completion of the design documents to be submitted for such review and comment. On or about the time of the scheduled submissions, Design-Builder and Owner shall meet and confer about the submissions, with Design-Builder identifying during such meetings, among other things, the evolution of the design and any significant changes or deviations from the Contract Documents, or, if applicable, previously submitted design submissions. Minutes of the meetings will be maintained by Design- Builder and provided to all attendees for review. Following the design review meeting, Owner shall review and comment on the interim design submissions in a time frame that is consistent with the turnaround times set forth in the Schedule. 2.4.2 Design-Builder shall submit to Owner Construction Documents setting forth in detail drawings and specifications describing the requirements for construction of the Work. The Construction Documents shall be consistent with the latest set of interim design submissions; as such submissions may have been modified in a design review meeting. The parties shall have a design review meeting to discuss, and Owner shall review and may comment on the Construction Documents in accordance with the procedures set forth GC 2.4.1. Design-Builder shall proceed with construction in accordance with the approved Construction Documents and shall submit one set of approved Construction Documents to Owner prior to commencement of construction. 2.4.3 Owner’s review and approval of interim design submissions and the Construction Documents is for the purpose of mutually establishing a conformed set of Contract Documents compatible with the requirements of the Work. Neither Owner’s review nor approval of any interim design submissions and Construction Documents shall be deemed to transfer any design liability from Design-Builder to Owner. 2.4.4 To the extent not prohibited by the Contract Documents or Legal Requirements, Design-Builder may prepare interim design submissions and Construction Documents for a portion of the Work to permit construction to proceed on that portion of the Work prior to completion of...

Design Development Services. 1. Estimated Recoverable Costs: $____________. (per attached Design Services Budget) 2. Target completion date: ______________.

Design Development Services. 2.3.2.1 Based on the approved Schematic Design Documents for each DC Project and any adjustments authorized by Webvan in the Development Plan or the Project Budget for such DC Project, Bechtel shall prepare for Webvan's review and approval drawings of sufficient detail to describe the size, shape, configuration, and quantity of typical and non-typical elements of each such DC Project (including, without limitation, the Operating Equipment), outline specifications and other documents which fix and describe the size and character of the DC Project as to architecture, engineering, structure, layout, electrical systems, mechanical systems, plumbing systems, materials and equipment (including the Operating Equipment), all of which documents are collectively referred to herein as the "DESIGN DEVELOPMENT DOCUMENTS". 2.3.2.2 Bechtel shall refine the Project Budget for each DC Project based on the Design Development Documents for such DC Project. Bechtel shall revise the Design Development

Design Development Services. 2.4.1 Design-Builder and Owner shall, consistent with any applicable provision of the Contract Documents, agree upon any interim design submissions that Owner may wish to review, which interim design submissions may include design criteria, drawings, diagrams and specifications setting forth the Project requirements. On or about the time of the scheduled submissions, Design-Builder and Owner shall meet and confer about the submissions, with Design-Builder identifying during such meetings, among other things, the evolution of the design and any significant changes or deviations from the Contract Documents, or, if applicable, previously submitted design submissions. Following the design review meeting, Owner shall review and approve the interim design submissions in a time that is consistent with the turnaround times set forth in Design-Builder’s schedule. 2.4.2 Design-Builder shall submit to Owner Construction Documents setting forth in detail drawings and specifications describing the requirements for construction of the Work. The Construction Documents shall be consistent with the latest set of interim design submissions, as such submissions may have been modified in a design review meeting. The parties shall have a design review meeting to discuss, and Owner shall review and approve, the Construction Documents in accordance with the procedures set forth Section 2.4.1 above. Design-Builder shall proceed with construction in accordance with the approved Construction Documents and shall submit one set of approved Construction Documents to Owner prior to commencement of construction. 2.4.3 Owner’s review and approval of interim design submissions and the Construction Documents is for the purpose of mutually establishing a conformed set of Contract Documents compatible with the requirements of the Work. Neither Owner’s review nor approval of any interim design submissions and Construction Documents shall be deemed to transfer any design liability from Design-Builder to Owner.

Design Development Services. ▇▇▇▇▇▇ Mechanical shall submit to Owner construction plans and specifications setting forth in detail drawings and specifications described in the requirements for construction of the Plant and completion of the Work. The construction documents shall meet the requirements of the Contract and be consistent with the scope of the Work. ▇▇▇▇▇▇ Mechanical and Owner shall meet and confer about the submissions, with Owner’s review of the design submissions and construction documents being for the purpose of mutually establishing a conformed set of construction documents compatible with the requirements of the Work. Neither Owner’s review nor approval of any design submissions or construction documents shall be deemed to transfer any design liability from ▇▇▇▇▇▇ Mechanical to Owner.

Design Development Services. 3.4.1 Any Design Development Services requested of the Architect under this Agreement shall be provided in accordance with the terms of Attachment B.

Design Development Services. In the Design Development Phase, the Architect shall provide those services designated necessary to prepare from the approved Schematic Design Documents, for approval by the Owner, the Design Development Documents consisting of drawings and other documents to fix and describe the size and character of the entire Project, including architectural, structural, mechanical and electrical systems, materials and such other elements as may be appropriate. Consideration shall be given to availability of materials, equipment and labor, construction sequencing and scheduling, economic analysis of construction and operations, user safety and maintenance requirements, and energy conservation. A.4.1 Project Administration services consisting of design development administrative functions. including: A.4.2 Disciplines Coordination/Document Checking services consisting of design development activities for: