Design Standards for the Utility System Sample Clauses

Design Standards for the Utility System. (a) The Developer will design and construct the Utility System in accordance with standards in the Development Code. (b) The Developer shall provide written certification to the City from a professional engineer registered in the State of Texas that the plans for any portion of the District’s Utility System meet the design criteria in the Development Code Subject to such certification from a registered professional engineer and approval of the plans by the City Engineer, no approval by the Planning Commission or the City Council is required for construction of the District’s Utility System.
View SourceView Similar (3)
Design Standards for the Utility System. All water utility and sanitary sewer utility infrastructure and related appurtenances that are intended to become the property of the District must be designed and constructed to comply with the minimum standards made applicable by the City Code of Ordinances, as amended, to water supply and sanitary sewer utility infrastructure development within the corporate limits of the City. The water supply system must be capable of providing the volumes and pressures necessary to meet fire suppression standards established by the City, and the system must be equipped with fire hydrants that meet the minimum spacing requirements applicable to subdivision development within the corporate limits of the City. All drainage improvements shall be designed and constructed to comply with the applicable standards adopted by Brazoria County, Texas and Angleton Drainage District. The District and its developer(s), their successors and assigns, shall not be obligated to apply for, pay for, or obtain from the City any permit for construction of any public improvement or any City inspection of any public improvement. If the District or its developer(s) desire to deviate from the standards set forth in this section, a licensed professional engineer, licensed in the State of Texas, shall submit plans for the impacted water or sanitary sewer infrastructure, notating the planned deviations, for the City Engineer’s review. The City will then have thirty (30) days to approve, comment on or reject the plans. If the City has not taken action with respect to the planned deviations within the thirty (30) day period, the planned deviations will be deemed approved and the District or its developers may proceed with the construction of such infrastructure in accordance with the submitted plans, unless the thirty (30) day period is waived. If required by the City, the District, acting through its licensed professional engineer, shall certify to the City that all water and sanitary sewer infrastructure has been designed and constructed in accordance with the applicable standard and the approved planned deviations, if any.
View SourceView Similar (3)
Design Standards for the Utility System. All water utility and sanitary sewer utility infrastructure and related appurtenances that are intended to become the property of the District must be designed and constructed to comply with the minimum standards made applicable by the City to water supply and sanitary sewer utility infrastructure development within the corporate limits of the City, except as may be modified by a Development Agreement covering the land in the District. The water supply system must be capable of providing the volumes and pressures necessary to meet fire suppression standards established by the City, and the system must be equipped with fire hydrants that meet the minimum spacing requirements applicable to subdivision development within the corporate limits the City. All drainage improvements shall be designed and constructed to comply with the applicable standards adopted by Brazoria County, Texas. Neither the District nor its developer(s) shall be required to submit plans and specifications for any public improvement to the City. The District and its developer(s), their successors and assigns, shall not be obligated to apply for, pay for, or obtain from the City any permit for construction of any public improvement or any City inspection of any public improvement.
View Source

Related to Design Standards for the Utility System

  • Design Standards Most recent edition of the “Owner’s Design Standards,” including any partial updates as may be directed by the Owner.

  • Design Criteria and Standards All Projects/Services shall be performed in accordance with instructions, criteria and standards set forth by the Director.

  • Standards Compliance Registry Operator shall comply with relevant existing RFCs and those published in the future by the Internet Engineering Task Force (IETF), including all successor standards, modifications or additions thereto relating to the DNS and name server operations including without limitation RFCs 1034, 1035, 1123, 1982, 2181, 2182, 2671, 3226, 3596, 3597, 4343, and 5966. DNS labels may only include hyphens in the third and fourth position if they represent valid IDNs (as specified above) in their ASCII encoding (e.g., “xn--ndk061n”).

  • Service Level Standards In addition to all other requirements in this Agreement, and in accordance with the Best Claims Practices & Estimating Guidelines, Vendor shall use reasonable and good faith efforts to meet the Service Level Standards set forth below.

  • Compliance with Accessibility Standards All parties to this Agreement shall ensure that the plans for and the construction of all projects subject to this Agreement are in compliance with standards issued or approved by the Texas Department of Licensing and Regulation (TDLR) as meeting or consistent with minimum accessibility requirements of the Americans with Disabilities Act (P.L. 101-336) (ADA).