Development of Proposed Processing Plans Sample Clauses

Development of Proposed Processing Plans. Based on each PM Forecast, Contractor shall develop a Proposed Processing Plan for each applicable Processing Season, which Proposed Processing Plan shall be submitted to PM (a) for the upcoming Flue-Cured Processing Season, not later than [*] days after receipt of the PM Forecast and (b) for the upcoming ▇▇▇▇▇▇ Processing Season, at least [*] days prior to the Processing Start Date of such ▇▇▇▇▇▇ Processing Season. 3.4.2.1 Each Proposed Processing Plan shall identify -------------------------------------------- (a) each Stemming Facility at which Contractor proposes to provide Stemming Services hereunder during the upcoming Processing Season, (b) the aggregate amount of PM tobacco that Contractor proposes to process at each such Stemming Facility, (c) the processing period for PM tobacco at each such Stemming Facility (i.e., the period, commencing with the Processing Start Date, during which --- Contractor expects to process PM tobacco during the upcoming Processing Season), (d) the plant(s) at each such Stemming Facility that Contractor expects to dedicate exclusively to the processing of PM tobacco during the processing period, if any, and the plant(s) at each such facility that Contractor expects to utilize in processing PM tobacco on a non-exclusive basis (i.e., plant(s) --- that will be used to process both PM green tobacco and other green tobacco during the relevant Processing Season), (e) the number of pounds of PM tobacco (green weight) to be processed at each plant at each such Stemming Facility during the Processing Season, (f) for each week during the processing period and for each Stemming Facility where Contractor proposes to process PM tobacco, the approximate amount of PM tobacco (green weight) that Contractor expects to process and (g) the Available PM Storage Capacity at each Stemming Facility where Contractor proposes to process PM tobacco. 3.4.2.2 Unless otherwise agreed prior to submittal of any Proposed Processing Plan for PM review, Contractor guarantees that the Proposed Processing Plan will conform to the following minimum requirements: (a) the processing period identified in the Proposed Processing Plan shall commence on the Processing Start Date and continue for a period no longer than 14 weeks (except that the processing period for a ▇▇▇▇▇▇ Processing Season may extend for an additional two weeks (not necessarily consecutive) if the Contractor is to process Maryland tobacco during such Processing Season), (b) the Proposed Proces...

Related to Development of Proposed Processing Plans

  • Development Plans Customer has provided Provider with a report attached hereto as Exhibit D (the “Current Development Plan”) describing in detail, as of January 1, 2017, the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the applicable Development Period. The information contained in the Current Development Plan is, with respect to the first three Years covered by the Current Development Plan, on a Quarter-by-Quarter basis, and with respect to the remaining Years covered by the Current Development Plan, on a Year-by-Year basis. The Current Development Plan attached hereto has been approved by the Parties. (a) From time to time during each Year of the Term, the Parties shall meet to discuss the planned development, drilling, production, processing, treating, marketing and other activities that Customer expects to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period. Customer and Provider shall each make their respective representatives available to participate in such meetings and discussions. No later than August 1 of each such Year, Customer shall provide (or cause to be provided) to Provider a proposed update of the then-currently agreed Development Plan, prepared on the same basis as the Current Development Plan and describing in detail the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period (any such update, an “Updated Development Plan” and, together with the Current Development Plan, each, a “Development Plan”). (b) Each proposed Development Plan shall include information as to the following, in each case, broken out, with respect to the first three Years covered by such Development Plan, on a Quarter-by-Quarter basis, and, with respect to the remaining Years covered by such Development Plan, on a Year-by-Year basis: (i) forward-looking production estimates for the applicable time period covered by such Development Plan for all Customer Gas and Customer Injected NGLs (A) that Customer reasonably and in good faith believes will become owned or Controlled by Customer during the time period covered by such Development Plan, and/or (B) that will be produced from (I) in the aggregate, all ▇▇▇▇▇ then-existing and (II) in the aggregate, all ▇▇▇▇▇ that are expected to be drilled during the time period covered by such Development Plan (each such Well reflected in such Development Plan, a “Planned Well” and, such collective estimates described in subsections (A) and (B), both with respect to a particular Quarter and an entire Year, the “Dedicated Production Estimates”); TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). (ii) (A) each new receipt point (including the location thereof) proposed by Customer with respect to the Dedicated Production Estimate reflected in such Development Plan (each such receipt point, a “Planned Receipt Point”), (B) each Receipt Point at which Customer expects to Tender Customer Gas or Customer Injected NGLs reflected in such Development Plan into the TGP System, and (C) the estimated portion of the Dedicated Production Estimate contained in such Development Plan that Customer expects to Tender at each such Receipt Point and Planned Receipt Point; (iii) (A) each new delivery point (including the location thereof) proposed by Customer with respect to the Dedication Production Estimate reflected in such Development Plan (each such delivery point, a “Planned Delivery Point”), (B) each Delivery Point at which Customer expects to Nominate Customer Residue Gas or Customer NGLs produced from the Dedicated Production Estimate reflected in such Development Plan to be redelivered to Customer, and (C) the estimated volumes of Customer Residue Gas and Customer NGLs produced from the Dedication Production Estimate contained in such Development Plan that Customer expects to Nominate to each such Delivery Point; (iv) the earliest date on which each Planned Receipt Point and Planned Delivery Point included in the Development Plan is required by Customer to be placed into service, which date shall not be earlier than three Months after the January 1st that is immediately subsequent to the date that the Development Plan that initially reflected such Planned Receipt Point or Planned Delivery Point was delivered to Provider hereunder; (v) the anticipated characteristics of the production from the ▇▇▇▇▇ and Planned ▇▇▇▇▇ reflected in such Development Plan (including liquids content and gas and liquids composition) and the projected production volumes and production pressures applicable thereto; provided that Customer may utilize the existing and historical production information from similarly situated ▇▇▇▇▇; (vi) any (A) proposed revision to the then-existing Dedicated Area and/or any then-existing Dedicated Contract and/or (B) any new contract that Customer proposes to be a Dedicated Contract; and (vii) other information reasonably requested by Provider that is relevant to the design, construction, and operation of the TGP System, including (A) any applicable Plant Expansion or Facilities Modification proposed by Customer, (B) the relevant Receipt Point and Planned Receipt Point facilities applicable to such Development Plan, and (C) the relevant Delivery Point and Planned Delivery Point facilities applicable to such Development Plan. TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**).

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Contract Area, including its abandonment.

  • Research Plan The Parties recognize that the Research Plan describes the collaborative research and development activities they will undertake and that interim research goals set forth in the Research Plan are good faith guidelines. Should events occur that require modification of these goals, then by mutual agreement the Parties can modify them through an amendment, according to Paragraph 13.6.

  • Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection ▇▇▇▇▇; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.

  • Commercialization Plan On a Product by Product basis, not later than sixty (60) days after the filing of the first application for Regulatory Approval of a Product in the Copromotion Territory, the MSC shall prepare and approve a rolling multiyear (not less than three (3) years) plan for Commercializing such Product in the Copromotion Territory (the "Copromotion Territory Commercialization Plan"), which plan includes a comprehensive market development, marketing, sales, supply and distribution strategy for such Product in the Copromotion Territory. The Copromotion Territory Commercialization Plan shall be updated by the MSC at least once each calendar year such that it addresses no less than the three (3) upcoming years. Not later than thirty (30) days after the filing of the first application for Regulatory Approval of a Product in the Copromotion Territory and thereafter on or before September 30 of each calendar year, the MSC shall prepare an annual commercialization plan and budget (the "Annual Commercialization Plan and Budget"), which plan is based on the then current Copromotion Territory Commercialization Plan and includes a comprehensive market development, marketing, sales, supply and distribution strategy, including an overall budget for anticipated marketing, promotion and sales efforts in the upcoming calendar year (the first such Annual Development Plan and Budget shall cover the remainder of the calendar year in which such Product is anticipated to be approved plus the first full calendar year thereafter). The Annual Commercialization Plan and Budget will specify which Target Markets and distribution channels each Party shall devote its respective Promotion efforts towards, the personnel and other resources to be devoted by each Party to such efforts, the number and positioning of Details to be performed by each Party, as well as market and sales forecasts and related operating expenses, for the Product in each country of the Copromotion Territory, and budgets for projected Pre-Marketing Expenses, Sales and Marketing Expenses and Post-Approval Research and Regulatory Expenses. In preparing and updating the Copromotion Territory Commercialization Plan and each Annual Commercialization Plan and Budget, the MSC will take into consideration factors such as market conditions, regulatory issues and competition.