Dual Interface Architecture or ACE Solution Clause Samples

Dual Interface Architecture or ACE Solution. Subject to the requirements and procedures set forth in Section 3.06(a) or (b) as applicable nothing in this Section 3.06 shall prohibit Cinemark from implementing either a Dual Interface Architecture or the ACE Solution or from switching from a Dual Interface Architecture to the ACE Solution or vice-versa. In addition, in certain limited circumstances, Cinemark may replace the Digital Cinema Equipment with 35mm projection in specific auditoriums and, in such circumstances, Cinemark shall reinstall Low Resolution Projection Systems in order to deliver the Advertising Services in such auditoriums on the same terms and conditions as existed prior to the initial conversion to either a Dual Interface Architecture or ACE Solution, as applicable. For any auditorium converted to the ACE Solution, LLC shall be responsible for all costs necessary to provide the Advertising Services for each Play List in the SMPTE format described in Section 4.01(a), and Cinemark will be responsible for all costs necessary to receive the Advertising Services content into Cinemark’s TMS and append the digital cinema playlist to provide LLC substantially the same functionality that existed before the conversion to the ACE Solution.
View SourceView Similar (3)
Dual Interface Architecture or ACE Solution. Subject to the requirements and procedures set forth in Section 3.06(a) or (b) as applicable nothing in this Section 3.06 shall prohibit Regal from implementing either a Dual Interface Architecture or the ACE Solution or from switching from a Dual Interface Architecture to the ACE Solution or vice-versa. In addition, in certain limited circumstances, Regal may replace the Digital Cinema Equipment with 35mm projection in specific auditoriums and, in such circumstances, Regal shall reinstall Low Resolution Projection Systems in order to deliver the Advertising Services in such auditoriums on the same terms and conditions as existed prior to the initial conversion to either a Dual Interface Architecture or ACE Solution, as applicable. For any auditorium converted to the ACE Solution, LLC shall be responsible for all costs necessary to provide the Advertising Services for each Play List in the SMPTE format described in Section 4.01(a), and Regal will be responsible for all costs necessary to receive the Advertising Services content into Regal’s TMS and append the digital cinema playlist to provide LLC substantially the same functionality that existed before the conversion to the ACE Solution.
View SourceView Similar (2)
Dual Interface Architecture or ACE Solution. Subject to the requirements and procedures set forth in Section 3.06(a) or (b) as applicable nothing in this Section 3.06 shall prohibit FM from implementing either a Dual Interface Architecture or the ACE Solution or from switching from a Dual Interface Architecture to the ACE Solution or vice-versa. In addition, in certain limited circumstances, FM may replace the Digital Cinema Equipment with 35mm projection in specific auditoriums and, in such circumstances, FM shall reinstall Low Resolution Projection Systems in order to deliver the Services in such auditoriums on the same terms and conditions as existed prior to the initial conversion to either a Dual Interface Architecture or ACE Solution, as applicable. For any auditorium converted to the ACE Solution, LLC shall be responsible for all costs necessary to provide the Services for each digital cinema playlist in the SMPTE format described in Section 4.01(a), and FM will be responsible for all costs necessary to receive the Services content into FM’s TMS and append the digital cinema playlist to provide LLC substantially the same functionality that existed before the conversion to the ACE Solution.
View SourceView Similar (2)
Dual Interface Architecture or ACE Solution. Subject to the requirements and procedures set forth in Section 3.06(a) nothing in this Section 3.06 shall prohibit AMC from implementing either a Dual Interface Architecture or the ACE Solution or from switching from a Dual Interface Architecture to the ACE Solution or vice-versa; provided that AMC reimburses LLC for any costs incurred with such conversion that is not planned as of the Execution Date and will provide at least 180 days’ notice prior to a conversion from Dual Interface Architecture to the ACE Solution. In addition, in certain limited circumstances, AMC may replace the Digital Cinema Equipment with 35mm projection in specific auditoriums and, in such circumstances unless such replacement is for a limited engagement, AMC shall install Low Resolution Projection Systems in order to deliver the Advertising Services in such auditoriums on the same terms and conditions as existed prior to the installation of the 35mm projection system. In the event of a limited engagement, AMC and LLC will use commercially reasonable efforts to enable the auditorium to display the Advertising Services, and if the Advertising Services are not able to be displayed, then any attendees of the limited engagement will be excluded AMC Attendance. For any auditorium converted to the ACE Solution, LLC shall be responsible for all costs necessary to provide the Advertising Services for each Play List in an appropriate format, and AMC will be responsible for all costs necessary to receive the Advertising Services content into AMC’s TMS and append the digital cinema playlist to provide LLC substantially the same functionality that existed before the conversion to the ACE Solution.
View Source

Related to Dual Interface Architecture or ACE Solution

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at a P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Architecture The Private Improvements shall have architectural features, detailing, and design elements in accordance with the Project Schematic Drawings. All accessory screening walls or fences, if necessary, shall use similar primary material, color, and detailing as on the Private Improvements.

  • Technical Interfaces 3.2.6.1 The Interconnection facilities provided by each Party shall be formatted using either Alternate Mark Inversion (AMI) line code with Superframe format framing or Bipolar 8-Zero Substitution with Extended Superframe (B8ZS ESF) format framing or any mutually agreeable line coding and framing.

  • Interface A defined set of transmission facilities that separate Load Zones and that separate the NYCA from adjacent Control Areas. Investor-Owned Transmission Owners. A Transmission Owner that is owned by private investors. At the present time these include: Central ▇▇▇▇▇▇ Gas & Electric Corporation, Consolidated Edison Company of New York, Inc., New York State Electric & Gas Corporation, Niagara Mohawk Power Corporation, Orange and Rockland Utilities, Inc., and Rochester Gas and Electric Corporation.

  • Network Interface Device 2.7.1 The NID is defined as any means of interconnection of the customer’s premises wiring to BellSouth’s distribution plant, such as a cross-connect device used for that purpose. The NID is a single line termination device or that portion of a multiple line termination device required to terminate a single line or circuit at the premises. The NID features two (2) independent ▇▇▇▇▇▇▇▇ or divisions that separate the service provider’s network from the customer’s premises wiring. Each chamber or division contains the appropriate connection points or posts to which the service provider and the customer each make their connections. The NID provides a protective ground connection and is capable of terminating cables such as twisted pair cable. 2.7.2 BellSouth shall permit NewPhone to connect NewPhone’s Loop facilities to the customer’s premises wiring through the BellSouth NID or at any other technically feasible point.