Dust Control Clause Samples
The Dust Control clause establishes requirements for managing and minimizing dust generated during construction or operational activities. Typically, it obligates the responsible party to implement measures such as water spraying, covering materials, or using dust suppressants to prevent dust from affecting neighboring properties or public areas. This clause serves to protect the environment and public health by reducing airborne particulates, ensuring compliance with regulations, and preventing complaints or penalties related to dust emissions.
POPULAR SAMPLE Copied 21 times
Dust Control. As elsewhere provided herein, the Contractor shall be responsible for all dust alleviation and control measures necessary and required for the public safety and convenience during the life of the contract. The Contractor shall use reclaimed water to control dust from unpaved surfaces as needed on a daily basis or as directed by the Construction Manager. The water shall be applied at a limited rate so as to avoid the creation of runoff from the site. The Contractor shall not use water to flush down paved or impervious surfaces as a means of dust control. Paved or impervious surfaces shall be swept with a street sweeper as needed to control dust on the site. Compensation for water applied as alleviation and/or prevention of dust nuisance and street sweeping shall be considered as included in the prices paid for the various contract items of work and no additional allowance will be made therefore.
Dust Control. Dust-proof enclosures or partitions for protection wherever dusty or dirty work is performed and dampening of debris to avoid dusting when removed shall be provided and included as a cost of the work.
Dust Control. Contractor shall perform his operations in such a manner as to limit dust. Contractor will not create dust in such a quantity as to violate the South Coast Air Quality Management District (AQMD) regulations.
Dust Control. Cutting, Patching and Fitting
Dust Control i. The Owner shall use such method to prevent any dust problem as the Town shall deem necessary and for this purpose, the Town may notify the Owner in writing from time to time of the requirements of the Town.
Dust Control. A. The General Contractor shall provide adequate means for the purpose of preventing dust caused by construction operations throughout the period of the construction contract.
B. The committing of nuisances and creating dust on the land and adjacent property shall be rigorously prohibited and adequate steps taken to prevent it.
Dust Control. Contractor, for the duration of the Contract, shall maintain all excavation, embankments, haul roads, plant sites, waste disposal areas, borrow areas, and all other Work areas free from dust, as determined by Owner or Owner’s Representative. Industry-accepted methods of dust control suitable for the area involved, such as sprinkling, light bituminous treatment or similar methods, will be permitted. No separate payment will be made for dust control. No chemical treatment or oil application is acceptable.
Dust Control. Contractor shall use measures to prevent and control dust within the area affected by the Work. No additional compensation shall be paid to Contractor for dust control. Contractor shall clean any soil, dirt, or debris tracked onto any adjacent streets. Within 24 hours of notification by the Town that any adjacent streets require cleaning, Contractor shall clean such streets or the Town may have the streets cleaned and deduct the cost of such cleaning from the Contract Price.
Dust Control. Contractor shall perform his operations in such a manner as to limit dust.
1. Contractor will not create dust in such a quantity as to violate the Air Quality Management District (AQMD) regulations.
2. Contractor is responsible for sweeping adjacent sidewalks and roadways of any dirt and debris left behind from their equipment entering and exiting County Flood Control channels. This should include the use of a street sweeper if necessary to completely remove any debris on the roadways.
Dust Control. 1. The Contractor shall be responsible for maintenance and set-up of dust control such as water or calcium and bear all associated costs.
2. The Contractor shall control dust at all times for the duration of project.
3. If the Contractor fails to maintain dust control the City may carry out dust control as needed and charge the Contractor for costs incurred.