Electrical Requirements. Galaxy does not provide electrical installations. A licensed electrician must follow any and all applicable codes; and must be wired according to manufacturer’s specifications. All 220V / 240V spas and swim‐spas must have an accessible GFCI breaker installed on the outside of the house in accordance with local codes or at a minimum 5’ from the hot tub. If you do not have a licensed electrician follow proper manufacturer’s instructions, the warranty will be void and service cannot be performed until all wiring and disconnect issues are resolved. We strongly discourage using an ▇▇▇▇▇ GFCI breaker. You will need enough wire to reach the front corner of your spa, plus 6 more feet. Depending on the brand and model, wiring and conduit can run through the inside of the hot tub. On swim‐spas, there may be (2) electrical connections and/or a junction box. You will need (Voltage) (amps) and (wires). Please check manufacturer’s spa manual for wire gauge requirements. 6 gauge or 8‐gauge wire minimum is recommended. Jacuzzi 210, 225, 315 & 325 require 4 wire hook‐up when converting to 220V and 40 amps. Jacuzzi/Sundance 780/335 and higher series hot tub are 3 wire and 50/60 amperages. All Bahama Spas are 60 amps. Nordic Spas are 4 wire and 40 or 50 amps. On 110V models, the cord will not extend beyond 4 ft. from the nearest corner of the hot tub. No extension cords on 110Vmodels.
Appears in 2 contracts
Sources: Purchase Agreement, Purchase Agreement