Engineered wood Sample Clauses

Engineered wood. All manufacturing processes from the initial combination of constituent materials until the wood product is in its final form, occurred in the United States. When necessary, recipients may apply for, and the agency may grant, a waiver from these requirements. The agency should notify the recipient for information on the process for requesting a waiver from these requirements. When the Federal agency has made a determination that one of the following exceptions applies, the awarding official may waive the application of the Buy America Preference in any case in which the agency determines that: (1) applying the Buy America Preference would be inconsistent with the public interest; (2) the types of iron, steel, manufactured products, or construction materials are not produced in the United States in sufficient and reasonably available quantities or of a satisfactory quality; or (3) the inclusion of iron, steel, manufactured products, or construction materials produced in the United States will increase the cost of the overall project by more than 25 percent. A request to waive the application of the Buy America Preference must be in writing. The agency will provide instructions on the format, contents, and supporting materials required for any waiver request. Waiver requests are subject to public comment periods of no less than 15 days and must be reviewed by the Made in America Office. There may be instances where an award qualifies, in whole or in part, for an existing waiver described at [link to awarding agency web site with information on currently applicable general applicability waivers]. Refer to ▇▇▇.▇▇▇.▇▇▇▇.▇▇▇/▇▇▇/▇▇▇▇/▇▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇-▇▇▇▇▇▇▇▇▇-▇▇▇-▇▇▇▇▇▇▇▇▇▇▇/ for the definitions of the Buy America Preference award term. # Nucleic Acid Synthesis Screening. Beginning on April 26, 2025, the Performer (or Recipient of award) may procure synthetic nucleic acids and benchtop nucleic acid synthesis equipment, as defined in the 2024 OSTP Framework for Nucleic Acid Synthesis Screening (Framework), only from providers or manufacturers that attest to adhering to the Framework. The attestation may be posted on a public website or provided directly to the Performer (or Recipient of award) upon request. The Performer (or Recipient of award) shall include this requirement in all lower tier agreements. Non-Funded Cooperative Agreement – 7 CFR 550 and: # This agreement defines the parties' planned cooperative research of mutual interest and does not oblig...
View SourceView Similar (2)
Engineered wood. All manufacturing processes from the initial combination of constituent materials until the wood product is in its final form, occurred in the United States. When necessary, recipients may apply for, and the Department may grant, a waiver from these requirements. To help federal agencies and recipients meet BABA requirements, the U.S. Department of Commerce, National Institute for Standards and Technology (NIST), Hollings Manufacturing Extension Partnership (MEP) National Network™ provides a service to connect stakeholders, including recipients, to U.S. manufacturers that have relevant production capabilities and capacities to help fulfill current market and supply chain needs. Recipients considering a BABA nonavailability waiver are strongly encouraged to contact the NIST/MEP for assistance with supplier scouting services prior to seeking a BABA nonavailability waiver. Further information on the NIST/MEP supplier scouting services is available at: ▇▇▇▇▇://▇▇▇▇.▇▇▇/mep/supply-chain/supplier-scouting. When the Department has made a determination that one of the following exceptions applies, the awarding official may waive the application of the Buy America Preference in any case in which the Department determines that: applying the Buy America Preference would be inconsistent with the public interest (public interest waiver); the types of iron, steel, manufactured products, or construction materials are not produced in the United States in sufficient and reasonably available quantities or of a satisfactory quality (nonavailability waiver); or the inclusion of iron, steel, manufactured products, or construction materials produced in the United States will increase the cost of the overall project by more than 25 percent (unreasonable cost waiver). A request to waive the application of the Buy America Preference must be in writing. The Department will provide instructions on the format, contents, and supporting materials required for any waiver request. Waiver requests are subject to public comment periods of no less than 15 days and must be reviewed by the Made in America Office. There may be instances where an award qualifies, in whole or in part, for an existing waiver described on the Department’s Build America, Buy America website found at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇.▇▇▇/oam/build-america-buy-america.
View Source
Engineered wood. All manufacturing processes from the initial combination of constituent materials until the wood product is in its final form, occurred in the United States.
View Source
Engineered wood. All manufacturing processes from the initial combination of constituent materials until the wood product is in its final form, occurred in the United States. Waivers When necessary, recipients may apply for, and the agency may grant, a waiver from these requirements. The agency should notify the recipient for information on the process for requesting a waiver from these requirements. When the Federal agency has made a determination that one of the following exceptions applies, the awarding official may waive the application of the Buy America Preference in any case in which the agency determines that: (1) applying the Buy America Preference would be inconsistent with the public interest; (2) the types of iron, steel, manufactured products, or construction materials are not produced in the United States in sufficient and reasonably available quantities or of a satisfactory quality; or (3) the inclusion of iron, steel, manufactured products, or construction materials produced in the United States will increase the cost of the overall project by more than 25 percent. A request to waive the application of the Buy America Preference must be in writing. The agency will provide instructions on the format, contents, and supporting materials required for any waiver request. Waiver requests are subject to public comment periods of no less than 15 days and must be reviewed by the Made in America Office.
View Source

Related to Engineered wood

  • Mold The Contractor shall take steps to prevent mold from developing on the Site, or being released into the air and shall promptly decontaminate any areas of mold that develop.

  • Supplier Development lf the Buyer identifies problems in supplier performance based on supplier monitoring, he shall initiate improvement measures at the Supplier. The Buyer shall pursue the possibilities of continuous improvement of the Supplier. The supplier audit is a form of supplier development; the exchange of information and experience between the Buyer and the Supplier also serves this purpose.

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.64 – DEBARMENT AND SUSPENSION CERTIFICATION (3/18). Pursuant to 2 CFR 180 and 2 CFR 417, Purchaser shall certify and obtain certifications from its Subcontractors regarding debarment, suspension, ineligibility, and voluntary exclusion, including additional Subcontractors obtained after award of this contract. “Subcontractors” are participants in lower tier covered transactions. Purchaser may rely upon a certification of a prospective Subcontractor that it is not proposed for debarment under 48 CFR 9.4, debarred, suspended, ineligible, or voluntarily excluded from participating in covered transactions or timber sales, unless Purchaser knows that the certification is erroneous. Purchaser shall keep the certifications of its Subcontractors on file until timber sale Termination Date and any extensions thereof, and will provide a copy at the written request of Contracting Officer. Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render in good faith the certification required by this Subsection. The knowledge and information of Purchaser is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings. If Purchaser knowingly enters into a timber sale transaction with a person who is proposed for debarment under 48 CFR 9.4, suspended, debarred, ineligible, or voluntarily excluded from participation in covered transactions or timber sales, in addition to other remedies available to the Government, Forest Service may pursue available remedies, including suspension and/or debarment. Contracting Officer shall provide a copy of Forms AD-1047 Certification Regarding Debarment, Suspension and Other Responsibility Matters – Primary Covered Transactions and AD-1048 Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion – Lower Tier Covered Transactions to the Purchaser. Purchaser shall complete form AD-1047 and provide to the Contracting Officer upon request. Purchaser shall require each subcontractor to complete form AD-1048 and provide to the Contracting Officer upon request.

  • SIGNIFICANT LANDS INVENTORY FINDING Find that this activity is consistent with the use classification designated by the Commission for the land pursuant to Public Resources Code section 6370 et seq.

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.