First Scenario Sample Clauses

First Scenario. If the Performance Criteria are met and the Executive remains with the Company in his capacity as set forth in Section 2.1, the Executive shall be entitled to receive his then current salary, and the shares granted under the Stock Option shall continue to vest pursuant to the Stock Options's vesting schedule. In addition, if the Performance Criteria are met, and the Executive is terminated without Cause, the Company shall pay the Executive six months of his then current annual salary and all of his unvested shares granted under the Stock Option shall be come fully vested.
View Source
First Scenario. WLAN1 → WLAN2 When a mobile node roams to the foreign WLAN2 from home WLAN1. • Initial Step between WLAN1 and WLAN2: The mobile node has a certificate which is signed by HAAA. The certificate of mobile node includes the public key of MN, and network access identifier of MN. If the HAAA and LAAA have the roaming agreement, the LAAA will get a certificate which is signed by HAAA. The certificate of LAAA includes Table 1: Notations PKA: A’s public key SKA: A’s secret key SIGNSKA: Signature by A’s private key DSDV: Destination sequence distance vector AP: Access point MAP: Mobile anchor point MN: Mobile node MG: MANET’s gateway GK: Group key of a MANET or WLAN. NAI: An unique network access identifier BM: Binding update message CertA: A’s certificate RA: random number issued by A LKf : Lifetime of Kf the public key of LAAA, and the public key of LAAA is signed by HAAA’s private key. • First Roaming at a Foreign Network: Within the wireless network, a mobile node can often roam around foreign domain, where it expects to ac- cess real-time network services and resources at any time and anywhere. Thus the mobile node provides some information to be verified by LAAA. As Fig- ure 2 illustrates, a mobile node not only be authenti- cated with LAAA but also LAAA be authenticated with mobile node, too. The processes go through as follows: 1) MN → AP : Solicitation. The solicitation includes random number RMN and its network access identifier. MN MG IPv6 Routers HA (1) SOL : ▇▇▇ , ▇▇▇ (▇) ▇▇▇, ▇▇
View Source

Related to First Scenario

  • Foreign-Owned Companies in Connection with Critical Infrastructure If Texas Government Code, Section 2274.0102(a)(1) (eff. Sept. 1, 2023, Section 2275.0102(a)(1), pursuant to House Bill 4595, Acts 2023, 88th Leg., R.S.) (relating to prohibition on contracts with certain foreign-owned companies in connection with critical infrastructure) is applicable to this Contract, pursuant to Government Code Section 2274.0102 (eff. Sept. 1, 2023, Section 2275.0102, pursuant to House Bill 4595, Acts 2023, 88th Leg., R.S.), Contractor certifies that neither it nor its parent company, nor any affiliate of Contractor or its parent company, is: (1) majority owned or controlled by citizens or governmental entities of China, Iran, North Korea, Russia, or any other country designated by the Governor under Government Code Section 2274.0103 (eff. Sept. 1, 2023, Section 2275.0103, pursuant to House Bill 4595, Acts 2023, 88th Leg., R.S.), or (2) headquartered in any of those countries.

  • Geometric visibility The visibility of the illuminating surface, including its visibility in areas which do not appear to be illuminated in the direction of observation considered, shall be ensured within a divergent space defined by generating lines based on the perimeter of the illuminating surface and forming an angle of not less than 5° with the axis of reference of the headlamp.

  • Framework Management Structure The Supplier shall provide a suitably qualified nominated contact (the “Supplier Framework Manager”) who will take overall responsibility for delivering the Goods and/or Services required within this Framework Agreement, as well as a suitably qualified deputy to act in their absence. The Supplier shall put in place a structure to manage the Framework in accordance with Framework Schedule 2 (Goods and/or Services and Key Performance Indicators). A full governance structure for the Framework will be agreed between the Parties during the Framework Agreement implementation stage. Following discussions between the Parties following the Framework Commencement Date, the Authority shall produce and issue to the Supplier a draft Supplier Action Plan. The Supplier shall not unreasonably withhold its agreement to the draft Supplier Action Plan. The Supplier Action Plan shall, unless the Authority otherwise Approves, be agreed between the Parties and come into effect within two weeks from receipt by the Supplier of the draft Supplier Action Plan. The Supplier Action Plan shall be maintained and updated on an ongoing basis by the Authority. Any changes to the Supplier Action Plan shall be notified by the Authority to the Supplier. The Supplier shall not unreasonably withhold its agreement to any changes to the Supplier Action Plan. Any such changes shall, unless the Authority otherwise Approves, be agreed between the Parties and come into effect within two weeks from receipt by the Supplier of the Authority’s notification. Regular performance review meetings will take place at the Authority’s premises throughout the Framework Period and thereafter until the Framework Expiry Date (“Supplier Review Meetings”). The exact timings and frequencies of such Supplier Review Meetings will be determined by the Authority following the conclusion of the Framework Agreement. It is anticipated that the frequency of the Supplier Review Meetings will be once every month or less. The Parties shall be flexible about the timings of these meetings. The purpose of the Supplier Review Meetings will be to review the Supplier’s performance under this Framework Agreement and, where applicable, the Supplier’s adherence to the Supplier Action Plan. The agenda for each Supplier Review Meeting shall be set by the Authority and communicated to the Supplier in advance of that meeting. The Supplier Review Meetings shall be attended, as a minimum, by the Authority Representative(s) and the Supplier Framework Manager.

  • Phase 2 Phase 2 is expected to consist of Member Nodes and a select number of Nodes operated by non-Members. The non-Member Nodes will be required to comply with Node hosting terms as set forth by the Council, which may be amended from time to time (the “General Node Terms”).

  • Phase II A small portion of the work for the Phase II modifications to the Plattsburgh Substation will be performed by Transmission Owner, and the remainder will be performed by Clinton and ▇▇▇▇▇▇▇▇▇. A detailed definition of the specific scope for Transmission Owner and Clinton and ▇▇▇▇▇▇▇▇▇ including interface points shall be defined during the design phase and, as such documents become available, copies will be delivered to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The full scope includes the installation of wave traps, CCVT’s and modifications and/or additions to relaying on the MWP-1 and MWP- 2 lines. These lines will be reconfigured at the completion of Phase II to connect to ▇▇▇▇▇ and ▇▇▇▇▇▇▇ Substations on MWP-1 and the ▇▇▇▇ Substation on MWP-2. Clinton and ▇▇▇▇▇▇▇▇▇ will design the upgrades and purchase the materials based on the outline specification that was prepared and issued by Transmission Owner. The work to be performed by Clinton and ▇▇▇▇▇▇▇▇▇ will include both the materials for the exterior and interior installations and items for Transmission Owner installation inside the control building in existing relay panels and communication racks. In addition, Clinton and ▇▇▇▇▇▇▇▇▇ will be responsible for the exterior and interior construction work and will provide construction management services in coordination with Transmission Owner. The civil design for the foundations and the electrical design for the cable runs to the control room will be designed by, as approved by Transmission Owner, and installed under the supervision and control of Clinton and ▇▇▇▇▇▇▇▇▇. The equipment will be selected and procured in accordance with the specifications developed during the detailed engineering phase, copies of which shall be furnished to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The construction of the foundations, structures, wave traps, CCTV and cable runs into the control building to the termination cabinets will be completed by Clinton and ▇▇▇▇▇▇▇▇▇. The work at the Plattsburgh Substation will be installed under Transmission Owner’s CPP-1. Transmission Owner will provide Protection and Controls Engineering, install and terminate wiring from the termination cabinets to the control panels and relays, install relays and equipment in the existing panels, and will commission such work inside the 230kV control building. Transmission Owner will develop the communications protocols and data flow over the circuits.