Flight Planning Sample Clauses

Flight Planning. Flight planning will be drafted under the responsibility of administrative authorities in the respective countries, which are to be identified as follows: Belgium Management Unit of the North Sea (▇▇▇▇) Denmark Admiral Danish Fleet Federal Republic of Germany Central Command for Maritime Emergencies (CCME) France French Customs Ireland Irish Coast Guard Netherlands Netherlands Coast Guard Centre (KUWA) Norway Norwegian Coastal Administration Sweden Coast Guard Headquarters (CGHQ) United Kingdom Maritime and Coastguard Agency (MCA)
Flight Planning. For any flight not in the vicinity of the Jasper County Airport (KRZL) Renter must list in their online scheduling reservation the planned route of flight (list airports only). This may be done through the scheduling software or by advising the JCAA who can then input the information into the scheduling software.
Flight Planning. Before a UA engages in international air navigation, a flight plan142 is neces- sary per Chapter 3 of Annex 2 on Rules of the Air to the Chicago Conven- 138 UTM Guidance // accessed April 25, 2019, ▇▇▇▇▇://▇▇▇.▇▇▇▇.▇▇▇/safety/UA/Pages/ UTM-Guidance.aspx 139 UTM Guidance // accessed April 25, 2019, ▇▇▇▇▇://▇▇▇.▇▇▇▇.▇▇▇/safety/UA/Pages/ UTM-Guidance.aspx 140 UTM Guidance // accessed April 25, 2019, ▇▇▇▇▇://▇▇▇.▇▇▇▇.▇▇▇/safety/UA/Pages/ UTM-Guidance.aspx 141 ICAO – Drone Enable Conference – 170922-23 – Videos. RPAS Regulations. Accessed Febru- ary 19, 2019. ▇▇▇▇▇://▇▇▇▇-▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/community-info/icao-drone-enable-confer- ence-170922-23-videos/ 142 Flight plan. Specified information provided to air traffic services units, relative to an intended flight or portion of a flight of an aircraft. tion 1944, or as otherwise mandated by the overflown State.143 Accordingly, the pilot is responsible for planning a safe flight and also for the prior submission of the flight plan. The UA shall adhere to the flight plan and ATC clearances. The overflown States or the State into which the flight will be operated may require additional information related to the intended operation of the UAS. Also, the ANSP may admit or change the flight plan of the UA for reasons such as route, timing and any unique considerations associated with the UA, cargo or contingency procedures. Moreover, the ANSP shall have the capacity to provide and approve contingency plans for each UA flight plan before going airborne in the case an unforeseen situation occurs.144 For example, a UAS may encounter a situation of loss of the C2 link. The contingency actions will depend on the segment of flight where the failure occurs, the UA characteristics and performance, the risk it represents to other airspace users and the risk to persons and property. One contingency option could be the continuation of the original flight plan; this may be appropriate if the planned flight is short and the planned destination is a low-density aerodrome or landing site, or if the planned flight occurs in low-density airspace.145 UAS operations offer the potential for increased point A to point A opera- tions, as opposed to point A to point B, where the vast majority of manned aircraft international operations take place, typically flown to and from aerodromes.146 For instance, a UA may transit to distant operational areas while crossing international airspaces and subsequently return to the point of origin. These scena...
Flight Planning. Computers are available for flight planning on the first floor of the terminal building in Million Air’s Flight Planning Room.
Flight Planning 

Related to Flight Planning

  • Procurement Planning Prior to the issuance of any invitations to bid for contracts, the proposed procurement plan for the Project shall be furnished to the Association for its review and approval, in accordance with the provisions of paragraph 1 of Appendix 1 to the Guidelines. Procurement of all goods and works shall be undertaken in accordance with such procurement plan as shall have been approved by the Association, and with the provisions of said paragraph 1.

  • Project Planning GOVERNMENTAL APPROVALS; ENVIRONMENTAL COMPLIANCE; PUBLIC INFORMATION 30 4.1 Planning and Engineering Activities 30 4.2 Site Conditions 30 4.3 Governmental Approvals 30 4.4 Environmental Compliance 34 4.5 Community Outreach and Public Information 35

  • Transition Planning The AGENCY will be responsible for the development of the student’s Transition Plan, which begins upon entry and is completed prior to the student’s exit.

  • Business Continuity Planning Supplier shall prepare and maintain at no additional cost to Buyer a Business Continuity Plan (“BCP”). Upon written request of Buyer, Supplier shall provide a copy of Supplier’s BCP. The BCP shall be designed to ensure that Supplier can continue to provide the goods and/or services in accordance with this Order in the event of a disaster or other BCP-triggering event (as such events are defined in the applicable BCP). Supplier’s BCP shall, at a minimum, provide for: (a) the retention and retrieval of data and files; (b) obtaining resources necessary for recovery, (c) appropriate continuity plans to maintain adequate levels of staffing required to provide the goods and services during a disruptive event; (d) procedures to activate an immediate, orderly response to emergency situations; (e) procedures to address potential disruptions to Supplier’s supply chain; (f) a defined escalation process for notification of Buyer, within two (2) business days, in the event of a BCP-triggering event; and (g) training for key Supplier Personnel who are responsible for monitoring and maintaining Supplier’s continuity plans and records. Supplier shall maintain the BCP and test it at least annually or whenever there are material changes in Supplier’s operations, risks or business practices. Upon ▇▇▇▇▇’s written and reasonable request, Supplier shall provide Buyer an executive summary of test results and a report of corrective actions (including the timing for implementation) to be taken to remedy any deficiencies identified by such testing. Upon ▇▇▇▇▇’s request and with reasonable advance notice and conducted in such a manner as not to unduly interfere with Supplier’s operations, Supplier shall give Buyer and its designated agents access to Supplier’s designated representative(s) with detailed functional knowledge of Supplier’s BCP and relevant subject matter.

  • Selection Planning Prior to the issuance to consultants of any requests for proposals, the proposed plan for the selection of consultants under the Project shall be furnished to the Association for its review and approval, in accordance with the provisions of paragraph 1 of Appendix 1 to the Consultant Guidelines. Selection of all consultants’ services shall be undertaken in accordance with such selection plan as shall have been approved by the Association, and with the provisions of said paragraph 1.