Common use of Format of the price schedule Clause in Contracts

Format of the price schedule. Entries in the first four columns in the price schedule in section C2.2 are made either by the Purchaser or the tendering supplier. If the Supplier is to be paid an amount for the item which is not adjusted if the quantity of work in the item changes, the tendering supplier enters the amount in the Price column only, the Unit, Quantity and Rate columns being left blank. If the Supplier is to be paid an amount for the item which is the rate for the item multiplied by the quantity completed, the tendering Supplier enters the rate which is then multiplied by the Quantity to produce the Price, which is also entered. If the Supplier is to be paid an amount for an item proportional to the length of time for which the goods and services are provided, a unit of time is stated in the Unit column and the length of time (as a quantity of the stated units of time) is stated in the Quantity column. C2.2 the price schedule Item nr Description Unit QTY Rate Price 1 157502 REFRIGERANT : TYPE: FREON; RATING: R22; CONTAINER: CYL 65 KG; GAS CONTENTS 56.7KG; REFERENCE NO: R22; VENDORS ARE RESPONSIBLE FOR ENSURING THAT THEY ARE PERFORMING AGAINST THE CORRECT DRAWING REVISION NUMBER (IF APPLICABLE). ****************** FRE0NR22 ****************** EA 90 2 0213044 GAS: TYPE: ARGON/CARB ON; CONTAINER: CYL 17.8 KG; MATERIAL SAFETY DATA SHEETS WITH ENVIRONMEN TAL INFORMATION IN THE 16 POINT FORMAT TO BE PROVIDED WITH EVERY EA 20 DELIVERY AS REQUIRED BY THE OCCUPATION AL HEALTH AND SAFETY ACT; VENDORS ARE RESPONSIBLE FOR ENSURING THAT THEY ARE PERFORMING AGAINST THE CORRECT DRAWING REVISION NUMBER (IF APPLICABLE). ****************** ****************** ****** COOGAR 84, K1065C, UN1956 ****************** ****************** ******

Format of the price schedule. Entries in the first four columns in the price schedule in section C2.2 are made either by the Purchaser or the tendering supplier. If the Supplier is to be paid an amount for the item which is not adjusted if the quantity of work in the item changes, the tendering supplier enters the amount in the Price column only, the Unit, Quantity and Rate columns being left blank. If the Supplier is to be paid an amount for the item which is the rate for the item multiplied by the quantity completed, the tendering Supplier enters the rate which is then multiplied by the Quantity to produce the Price, which is also entered. If the Supplier is to be paid an amount for an item proportional to the length of time for which the goods and services are provided, a unit of time is stated in the Unit column and the length of time (as a quantity of the stated units of time) is stated in the Quantity column. C2.2 the price schedule Item nr Description Unit QTY Rate Price 1 157502 REFRIGERANT 0052144 GASKET, PRE CUT: DIMENSIONS: ID 90 X OD 105 X THK 1.5 MM; TYPE: FREONDISTANCE; RATINGMATERIAL: R22SS GR 316; CONTAINERSHAPE: CYL 65 KGRD; GAS CONTENTS 56.7KGFOR USE WITH DIAMOND IK110 AIR HEATER SOOT BLOWER; PART NO: 304634-0117, SUPPLIER: UNKNOWN; EA 1 0094197 GASKET, PRE CUT: DIMENSIONS: ID 200 X OD 228 X THK 4 MM; TYPE: SWING COVER; MATERIAL: PAPER SS LINED; SHAPE: RD; FOR SWING CHECK VALVE; REFERENCE NO: R22152-1D; VENDORS ARE RESPONSIBLE EA 1 0094421 GASKET, PRE CUT: DIMENSIONS: ID 102 X OD 122 MM; THICKNESS: 0.5 MM; TYPE: COMPRESSOR; MATERIAL: COMPRESSED; SEAL RING, 122X122X0.5, USED ON THE SULZER BURCKHART COMPRESSOR TYPE C4N2F, MAIN EQUIPMENT 20KV BREAKER; REFERENCE NO: 5467; EA 1 0097252 GASKET, PRE CUT: DIMENSIONS: ID 90 X OD 110 X THK 2 MM; TYPE: GAS GENERATOR TANK; MATERIAL: RUBBER; SHAPE: RD; REFERENCE NO: 37Y112CM; EA 50 0097396 GASKET, PRE CUT: DIMENSIONS: ID 89 X OD 105 X THK 0.55 MM; TYPE: OUTER ▇▇▇▇▇ TUBE; MATERIAL: SS; SHAPE: RD; REFERENCE NO: 305656-0117; PART NO: 305656-0117,; EA 1 0097674 GASKET, PRE CUT: DIMENSIONS: ID 51 X OD 65 X THK 3 MM; TYPE: DOSING PUMP; MATERIAL: PTFE; SHAPE: RD; TYPE ▇▇▇▇▇▇▇ AND ▇▇▇▇▇▇▇, FOR ENSURING THAT THEY ARE PERFORMING AGAINST THE CORRECT USE WITH METERING DOSING PUMP TYPE G400V 7" MD SIMPLEX LIQUID END; REFERENCE NO: JP81790; PART NO: JP81790 EA 4 0097712 GASKET, PRE CUT: DIMENSIONS: ID 495 X OD 580 X THK 3 MM; TYPE: TUBE BUNDLE; MATERIAL: COMPRESSED; SHAPE: SQ; FOR H2 COOLER TUBE NEST; EA 1 0097748 GASKET, PRE CUT: DIMENSIONS: ID 695 X OD 780 X THK 2 MM; TYPE: RUPTURE DIAPHRAGM; MATERIAL: IT400; SHAPE: RD; PRESSURE RATING: PN6; FOR USE ON TURBINE 700PN6 DIN2699 EA 1 0097761 GASKET, PRE CUT: DIMENSIONS: ID 138 X OD 198 X THK 0.85 MM; TYPE: OIL PUMP; MATERIAL: PAPER; SHAPE: RD; ITEM 104/18-29; EA 1 0097785 GASKET, PRE CUT: DIMENSIONS: ID 186 X OD 225 X THK 3 MM; TYPE: OIL PUMP; MATERIAL: EUROPIL; SHAPE: RD; FLAT; EA 1 0097797 GASKET, PRE CUT: DIMENSIONS: ID 412 X OD 476 X THK 3 MM; TYPE: GENERATOR STATOR COOLER; MATERIAL: FIBER COMPRESSED; SHAPE: RD; FOR USE ON COOLER ON GENERATOR STATOR; EA 1 0097811 GASKET, PRE CUT: DIMENSIONS: ID 685 X OD 750 X THK 4 MM; TYPE: TURBINE; MATERIAL: COMPRESSED; SHAPE: RD; REFERENCE NO: 8500-001 EA 1 0097812 GASKET, PRE CUT: DIMENSIONS: ID 406 X OD 422 X THK 4 MM; TYPE: TURBINE; MATERIAL: COMPRESSED; SHAPE: RD; FLAT; EA 1 0097859 GASKET, PRE CUT: DIMENSIONS: ID 39 X OD 81 X THK 15 MM; TYPE: TURBINE; MATERIAL: RUBBER; SHAPE: RD; GENERATOR; REFERENCE NO: 38- 128092; EA 1 0097863 GASKET, SPIRAL WOUND: INNER RING INSIDE DIAMETER: 595 MM; OUTER RING OUTSIDE DIAMETER: 640 MM; FILLER MATERIAL: ASB; WINDING MATERIAL: SS; SHAPE: ROUND; METAFLEX; SIZE: 4MM ▇▇▇ ▇▇ ▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇: INNER RING INSIDE DIAMETER: 535 MM; OUTER RING OUTSIDE DIAMETER: 575 MM; FILLER MATERIAL: GRAPHITE; WINDING MATERIAL: SS; SHAPE: ROUND; METAFLEX; SIZE: 4MM THK; EA 1 0098029 GASKET, PRE CUT: DIMENSIONS: ID 50 X OD 80 X THK 2 MM; TYPE: TURBINE; MATERIAL: GRAPHITE; SHAPE: RD; REFERENCE NO: 282-19; EA 1 0098030 GASKET, PRE CUT: DIMENSIONS: ID 110 X OD 140 X THK 2 MM; TYPE: TURBINE; MATERIAL: GRAPHITE; SHAPE: RD; REFERENCE NO: DIN3754JTCEG1; EA 1 0098033 GASKET, PRE CUT: DIMENSIONS: ID 22 X OD 57 X THK 2 MM; TYPE: TURBINE; MATERIAL: MONTANIT; SHAPE: RD; REFERENCE NO: ▇▇▇-▇▇-▇▇ EA 1 0098035 GASKET, PRE CUT: DIMENSIONS: ID 83 X OD 133 X THK 2 MM; TYPE: TURBINE; MATERIAL: RUBBER; SHAPE: RD; REFERENCE NO: 100-117; EA 1 0098036 GASKET, PRE CUT: DIMENSIONS: ID 29 X OD 68 X THK 2 MM; TYPE: TURBINE; MATERIAL: RUBBER; SHAPE: RD; REFERENCE NO: 100-121 EA 1 0098042 GASKET, PRE CUT: DIMENSIONS: ID 65 X OD 105 X THK 0.5 MM; TYPE: PUMP; MATERIAL: MONTANIT; SHAPE: RD; USED ON LUBRI PUMP; EA 1 0098260 GASKET, PRE CUT: DIMENSIONS: ID 86 X OD 104 X THK 3 MM; TYPE: CHAMBER; MATERIAL: SS GR 316 GRAPHITE FILLED 98 PCT PURE; SHAPE: RD; USED ON PNEUMATIC REGULATOR SERIE 12800; DRAWING REVISION NUMBER (IF APPLICABLE). ****************** FRE0NR22 ****************** NO: 20.58/2011/12 ESK; DRAWING NO: ESK 20.58/2011/12; REFERENCE NO: 1904646816; REFERENCE NO: SCHEDULE: 5.01.22.12; EA 90 2 0213044 GAS6 0098294 GASKET SET: TYPE: ARGON/CARB ONSUPPORT INSULATOR; CONTAINERREFERENCE NO: CYL LS1/1-6D; REFERENCE NO: LSI1-1-6D; EA 1 0099471 GASKET, PRE CUT: DIMENSIONS: ID 38 X OD 50 X THK 3 MM; TYPE: BLIND FLANGE; MATERIAL: STL; SHAPE: RD; MAKE: MASONEILAN; FOR LEVEL REGULATOR ON GEN 687 MVA; REFERENCE NO: 190-450-8816 EA 300 0099489 GASKET, PRE CUT: DIMENSIONS: ID 29.5 X OD 39.5 X THK 1.5 MM; TYPE: LEVEL CONTROLLER; MATERIAL: STL; SHAPE: RD; FOR LEVEL CONTROLLERS ON GEN 687 MVA; TYPE MIP; PART NO: NAJ206HR, EA 1 0099491 GASKET, PRE CUT: DIMENSIONS: ID 102 X OD 113 X THK 1.5 MM; TYPE: LEVEL CONTROLLER; MATERIAL: SS; SHAPE: RD; USED ON ARMCO TANK FOR LEVEL CONTROLLERS ON GEN 687 MVA, TYPE MIP; PART NO: NAJ208HR, EA 1 0099492 GASKET, PRE CUT: DIMENSIONS: ID 102 X OD 113 X THK 1.5 MM; TYPE: LEVEL CONTROLLER; MATERIAL: SS; SHAPE: RD; FOR LEVEL CONTROLLERS ON GEN 687 MV A, TYPE MIP; PART NO: NAJ209AL, EA 1 0100019 GASKET, PRE CUT: DIMENSIONS: WD 62 MM X LG 3 M X THK 3.5 MM; TYPE: MANHOLE; MATERIAL: RUBBER COTTON BRAIDED; ON BOILERS; SHAPE STRIP; PART NO: FAB-CB-89101, EA 1 0100194 GASKET, PRE CUT: DIMENSIONS: ID 25 X OD 58 X THK 0.2 MM; TYPE: PUMP; MATERIAL: PAPER; SHAPE: RD; USED ON ▇▇▇▇▇▇▇ AND ▇▇▇▇▇▇▇ HYDRAZINE AMMONIA PUMP TWIN G50V24PX15; REFERENCE NO: JPR82241; PART NO: JPR82241, EA 1 0100311 GASKET SET: TYPE: HEAT EXCHANGER; APPLICATION: FEEDHEATING PLANT; EA 1 0100371 GASKET, SPIRAL WOUND: INNER RING INSIDE DIAMETER: 116.5 MM; OUTER RING OUTSIDE DIAMETER: 133 MM; FILLER MATERIAL: GRAPHITE; WINDING MATERIAL: SS; SHAPE: ROUND; METAFLEX; ID 98.5 MM X OD 16.5 MM X WD 4.5 MM; SIZE: THK 3.5 MM; REFERENCE NO: 304; REFERENCE NO: 319588-1127; EA 1 0100725 GASKET SET: TYPE: VALVE ACTUATOR BLOCK; APPLICATION: STOP HYDRAULIC NUMBER; REFERENCE NO: 12-16; REFERENCE NO: 269646; REFERENCE NO: 269646 TAG 2A-7A-8A; REFERENCE NO: 9(A-B-C-D); EA 1 0100911 GASKET SET: TYPE: DELUGE VALVE 100 MM; APPLICATION: FIRE PROTECTION DELUGE VALVES; SETS OF RUBBER FACE ▇▇▇▇▇ GASKETS; EA 1 0100912 GASKET SET: TYPE: DELUGE VALVE 150 MM; APPLICATION: FIRE PROTECTION DELUGE VALVES; OF RUBBER FACE AND ▇▇▇▇▇; EA 2 0101082 GASKET, PRE CUT: DIMENSIONS: DIA 185 X THK 2 MM; TYPE: ACTUATOR; MATERIAL: TEFLON; SHAPE: RD; USED ON HP EMERGENCY STOP VALVE; REFERENCE NO: 7160-006; REFERENCE NO: 7360-006; EA 32 0101146 GASKET, PRE CUT: DIMENSIONS: DIA 310 X THK 2 MM; TYPE: PUMP COVER; MATERIAL: COMPRESSED; SHAPE: RD; USED ON THE MAIN OIL PUMP; REFERENCE NO: WKL150/1; EA 6 0101171 GASKET, PRE CUT: DIMENSIONS: ID 1.25 M X OD 1.305 M X THK 2 MM; TYPE: CROSSOVER PIPE; MATERIAL: IT300; SHAPE: RD; SEALING; USED ON THE CROSSOVER PIPES IP-LP DN200; DRAWING NO: MAN MAIN B42.81600- 0039; DRAWING NO: MAN SUB F42.81665-0360; REFERENCE NO: 8160- 087; EA 40 0101314 GASKET, SPIRAL WOUND: INNER RING INSIDE DIAMETER: 15 MM; OUTER RING OUTSIDE DIAMETER: 30 MM; FILLER MATERIAL: GRAPHITE; WINDING MATERIAL: SS; SHAPE: ROUND; METAFLEX; SIZE: 4.5 MM THK; EA 10 0101343 GASKET, SPIRAL WOUND: INNER RING INSIDE DIAMETER: 36 MM; OUTER RING OUTSIDE DIAMETER: 70 MM; FILLER MATERIAL: GRAPHITE; WINDING MATERIAL: SS; SHAPE: ROUND; METAFLEX, SS OUTER RING, ID 36MM BY 52MM OD, STEEL RING 4.5MM THK, USED ON THE SP DRAIN PUMP ON THE TURBINES; SIZE: 4.5MM THK; EA 100 0101344 GASKET, SPIRAL WOUND: STYLE: METAFLEX; INNER RING INSIDE DIAMETER: 60 MM; FILLER OUTSIDE DIAMETER: 102 MM; FILLER INSIDE DIAMETER: 60 MM; OUTER RING OUTSIDE DIAMETER: 102 MM; PRESSURE RATING: CI 2500; FILLER MATERIAL: EXFOLIATED GRAPHITE; WINDING MATERIAL: SS; SHAPE: ROUND; THICKNESS: 4.5 MM; STAINLESS STEEL OUTER RING AND GRAPHITE; SIZE 60MM ID BY 96MM OD; USED ON THE LP DRAIN PUMP ON THE TURBINE; EA 200 0101442 GASKET, SPIRAL WOUND: STYLE: METAFLEX; INNER RING INSIDE DIAMETER: 100 MM; FILLER OUTSIDE DIAMETER: 127 MM; FILLER INSIDE DIAMETER: 100 MM; OUTER RING OUTSIDE DIAMETER: 127 MM; PRESSURE RATING: CL 2500; FILLER MATERIAL: GRAPHITE; WINDING MATERIAL: SS; SHAPE: ROUND; THICKNESS: 3 MM; WITH 3MM WIRE ON THE I.D; SIZE: 4.5MM THK; EA 180 0102198 GASKET SET: KIT; PART NO: F74106- E115-D2, EA 200 0102210 GASKET, SPIRAL WOUND: INNER RING INSIDE DIAMETER: 35 MM; OUTER RING OUTSIDE DIAMETER: 70 MM; PRESSURE RATING: PN40; FILLER MATERIAL: WINDING MATERIAL: SS; SHAPE: ROUND; FLEXAJOINT; DN25; SIZE: THK 3.5 MM; EA 1 0154602 GASKET, PRE CUT: DIMENSIONS: ID 17.8 KGX OD 23.8 X THK 3 MM; TYPE: VALVE; MATERIAL: PTFE; SHAPE: RD; DIN 19213; FOR SHUT-OFF VALVE SIEMENS TYPE 7MY1590-OFA; SOLID TYPE; EA 1 0180467 GASKET, PRE CUT: TYPE: SEAT RING; FOR EHS ▇▇▇▇▇▇ VALVE; PART NO: 19A- 2542X-012.3X2, EA 1 0180470 GASKET, PRE CUT: TYPE: CAGE; USED FOR EHS ▇▇▇▇▇▇ VALVE; PART NO: 26A- 5318X-012.3X2, EA 1 0180470 GASKET, PRE CUT: TYPE: CAGE; USED FOR EHS ▇▇▇▇▇▇ VALVE; PART NO: 26A- 5318X-012.3X2, EA 1 0215033 GASKET SET: TYPE: VOLUTE COVER; APPLICATION: PUMP; IN 4 DOVE TAILED SEGMENTS, PCD 1600, THICKNESS 0.8MM, FOR 1600 CW PUMP; PART NO: P2000-289ZZ, EA 1 0231316 GASKET, PRE CUT: TYPE: COVER PLATE; SOOTBLOWERS; PART NO: 323447-2128, EA 1 0231316 GASKET, PRE CUT: TYPE: COVER PLATE; SOOTBLOWERS; PART NO: 323447-2128, EA 1 0231317 GASKET, PRE CUT: TYPE: COVER PLATE; SOOTBLOWERS; PART NO: 339258-2122,). EA 1 0231317 GASKET, PRE CUT: TYPE: COVER PLATE; SOOTBLOWERS; PART NO: 339258-2122, EA 1 0231318 GASKET, PRE CUT: TYPE: BEARING RETAINER; SOOTBLOWERS; PART NO: 323449-2126, EA 180 0231318 GASKET, PRE CUT: TYPE: BEARING RETAINER; SOOTBLOWERS; PART NO: 323449-2126, EA 10 0231319 GASKET, PRE CUT: TYPE: HOUSING; SOOTBLOWERS; PART NO: 323446-2129, EA 25 0231319 GASKET, PRE CUT: TYPE: HOUSING; SOOTBLOWERS; PART NO: 323446-2129, EA 90 0528418 GASKET: TYPE: HOCHDRUCK; DIMENSIONS: SQ 570 X WD 60 THK 3 MM; MATERIAL: V30011Z31; SPECIFICATION: DIN 28091-GR-11-I-5- CR; EA 200 0565418 GASKET, PRE CUT: DIMENSIONS: ID 1.11M X OD 1.234M X THK 3MM; THICKNESS: 3 MM; TYPE: GEN HYDROGEN; MATERIAL: NITRILE; SHAPE: ROUND; RUBBER HARDNESS; 65 - 75 SHORE; > 10 MOHMS @ 500V DC; MATERIAL SAFETY DATA SHEETS WITH ENVIRONMEN TAL TYPE UNIQUE IDENTIFICATION: HE 370 NON CONDUCTIVE; MOULD IDENTIFIER: GASKET C.193.8546 3; PACKAGING: SEALED UV RESISTANT BAG; PACKAGING BAG TO HAVE THE DETAILED INFORMATION IN ON: MANUFACTURING DATE; EXPIRY DATE; LIFE EXPECTANCY; EACH DELIVERY OF THE 16 POINT FORMAT GASKET TO BE PROVIDED SUPPLIED TO LETHABO WITH EVERY ITS MATERIAL CERTIFICATE; STORE UNDER ROOM TEMPERATURE; EA 20 180 0565419 GASKET, PRE CUT: DIMENSIONS: ID 1.039M X OD 1.264M X THK 3MM; THICKNESS: 3 MM; TYPE: GEN HYDROGEN; MATERIAL: NITRILE; SHAPE: ROUND; RUBBER HARDNESS; 65 - 75 SHORE; > 10 MOHMS @ 500V DC; MATERIAL TYPE UNIQUE IDENTIFICATION: HE 370 NON CONDUCTIVE; MOULD IDENTIFIER: GASKET C.193.8546 3; PACKAGING: SEALED UV RESISTANT BAG; PACKAGING BAG TO HAVE THE DETAILED INFORMATION ON: MANUFACTURING DATE; EXPIRY DATE; LIFE EXPECTANCY; EACH DELIVERY AS REQUIRED BY OF THE OCCUPATION AL HEALTH AND SAFETY ACTGASKET TO BE SUPPLIED TO LETHABO WITH ITS MATERIAL CERTIFICATE; VENDORS ARE RESPONSIBLE FOR ENSURING THAT THEY ARE PERFORMING AGAINST STORE UNDER ROOM TEMPERATURE EA 200 0565420 GASKET, PRE CUT: DIMENSIONS: ID 1.044M X OD 1.164M X THK 3MM; THICKNESS: 3 MM; TYPE: GEN HYDROGEN; MATERIAL: NITRILE; SHAPE: ROUND; RUBBER HARDNESS; 65 - 75 SHORE; > 10 MOHMS @ 500V DC; MATERIAL TYPE UNIQUE IDENTIFICATION: HE 370 NON CONDUCTIVE; MOULD IDENTIFIER: GASKET C.193.8546 3; PACKAGING: SEALED UV RESISTANT BAG; PACKAGING BAG TO HAVE THE CORRECT DRAWING REVISION NUMBER DETAILED INFORMATION ON: MANUFACTURING DATE; EXPIRY DATE; LIFE EXPECTANCY; EACH DELIVERY OF THE GASKET TO BE SUPPLIED TO LETHABO WITH ITS MATERIAL CERTIFICATE; STORE UNDER ROOM TEMPERATURE EA 40 0565421 GASKET, PRE CUT: DIMENSIONS: ID 1.04M X OD 1.225M X THK 3MM; TYPE: GEN HYDROGEN; MATERIAL: NITRILE; SHAPE: ROUND; RUBBER HARDNESS; 65 - 75 SHORE; > 10 MOHMS @ 500V DC; MATERIAL TYPE UNIQUE IDENTIFICATION: HE 370 NON CONDUCTIVE; MOULD IDENTIFIER: GASKET C.193.8546 3; PACKAGING: SEALED UV RESISTANT BAG; PACKAGING BAG TO HAVE THE DETAILED INFORMATION ON: MANUFACTURING DATE; EXPIRY DATE; LIFE EXPECTANCY; EACH DELIVERY OF THE GASKET TO BE SUPPLIED TO LETHABO WITH ITS MATERIAL CERTIFICATE; STORE UNDER ROOM TEMPERATURE; EA 200 0565422 GASKET, PRE CUT: DIMENSIONS: ID 925 MM X OD 1.094 M X THK 3 MM; THICKNESS: 3 MM; TYPE: GEN HYDROGEN; MATERIAL: NITRILE; SHAPE: ROUND; RUBBER HARDNESS; 65 - 75 SHORE; > 10 MOHMS @ 500V DC; MATERIAL TYPE UNIQUE IDENTIFICATION: HE 370 NON CONDUCTIVE; MOULD IDENTIFIER: GASKET C.193.8546 3; PACKAGING: SEALED UV RESISTANT BAG; PACKAGING BAG TO HAVE THE DETAILED INFORMATION ON: MANUFACTURING DATE; EXPIRY DATE; LIFE EXPECTANCY; EACH DELIVERY OF THE GASKET TO BE SUPPLIED TO LETHABO WITH ITS MATERIAL CERTIFICATE; STORE UNDER ROOM TEMPERATURE EA 900 0588940 GASKET: TYPE: CENTRE RING; DIMENSIONS: OD 142 X THK 4.5 MM; MATERIAL: SS 321; SHAPE: ROUND; APPLICATION: SO3 FIGURE OF 8; DIMENSIONS: 80 NB PN 16; FILLER OD 115 X INNER RING OD 95 X INNER RING ID 86 MM; EA 70 0588941 GASKET: TYPE: CENTRE RING; DIMENSIONS: OD 92 X THK 4.5 MM; MATERIAL: SS 321; SHAPE: ROUND; APPLICATION: SO3 ▇▇▇▇▇ SMALL; DIMENSIONS: 40NB PN40; FILLER OD 70 X INNER RING OD 54 X INNER RING ID 48 MM; EA 40 0600367 GASKET: TYPE: MEDIUM FLANGE; DIMENSIONS: THK 3 MM; MATERIAL: SIGRAFLEX HOCHDRUCK; STYLE: FULL FACE; SHAPE: ROUND; APPLICATION: COMBUSTION AIR PIPE; HOLES: 8; HOLES: DIA 22 MM; DIMENSIONS: 150NB PN/6 X THK 3MM; EA 60 0600368 GASKET: TYPE: MIXING CHAMBER LARGE FLANGE; DIMENSIONS: ID 346 X OD 460 X THK 3 MM; MATERIAL: SIGRAFLEX HOCHDRUCK; HOLES: (IF APPLICABLE). ****************** ****************** ****** COOGAR 8412) DIA 14 MM; STYLE: FULL FACE; SHAPE: ROUND; APPLICATION: PIPE FLANGE INTERFACE; EA 80 0600369 GASKET: TYPE: INLET MIXING CHAMBER MEDIUM; DIMENSIONS: ID 115 X OD 220 X THK 3 MM; MATERIAL: SIGRAFLEX HOCHDRUCK; HOLES: (8) DIA 18 MM; STYLE: FULL FACE; SHAPE: ROUND; 180 MM PCD; EA 60 0600370 GASKET: TYPE: BURNER MIXING CHAMBER VALVES; DIMENSIONS: ID 100 X OD 155 X THK 3 MM; MATERIAL: SIGRAFLEX HOCKDRUCK; HOLES: NONE RING; STYLE: RING; SHAPE: ROUND; VALVE FLAGE PIPE ITERFACE; EA 30 0600371 GASKET: TYPE: SEAL AT FLANGE PIPE; DIMENSIONS: ID 170 X OD 280 X THK 3 MM; MATERIAL: SIGRAFLEX HOCHDRUCK; STYLE: FULL FACE; SHAPE: ROUND; APPLICATION: COMBUSTION AIR VALVE VERTICAL BELLOWS; HOLES: (9) DIA 22 MM; EA 90 0600372 GASKET: TYPE: BURNER FLANGE LARGE; DIMENSIONS: ID 320 X OD 460 X THK 3 MM; MATERIAL: SIGRAFLEX HOCHDRUCK; HOLES: (8) DIA 14 MM; STYLE: FULL FACE; SHAPE: ROUND; 410MM PCD; EA 45 0601896 GASKET: TYPE: MIXING CHAMBER PIPE POST VALVE; DIMENSIONS: ID 115 X OD 162 X THK 3 MM; MATERIAL: SIGRAFLEX HOCHDRUCK; STYLE: RING; SHAPE: ROUND; REFERENCE NO: ▇▇▇▇▇ 012015; EA 1 0601897 GASKET: TYPE: VALVE FLANGE PIPE CONNECTION; DIMENSIONS: ID 115 X OD 220 X 3 THK MM; MATERIAL: SIGRAFLEX HACHDRUCK; STYLE: FULL FACE; SHAPE: ROUND; APPLICATION: COMBUSTION AIR VALVE; HOLES: (8) DIA 18 PDC MM; SERIAL NO: ▇▇▇▇▇ 012015; EA 1 101533 GASKET, K1065CPRE CUT: DIMENSIONS: ID 1.08 X OD 1.13 X THK 2 MM; TYPE: GASKET OIL COOLER; MATERIAL: CENTELLEN; SHAPE: RD; REFERENCE NO: 3582-001; EA 8 97811 GASKET, UN1956 ****************** ****************** ******PRE CUT: DIMENSIONS: ID 685 X OD 750 X THK 4 MM; TYPE: TURBINE; MATERIAL: ASB COMPRESSED; SHAPE: RD; REFERENCE NO: 8500-001; EA 5 97812 GASKET, PRE CUT: DIMENSIONS: ID 406 X OD 422 X THK 4 MM; TYPE: TURBINE; MATERIAL: ASB COMPRESSED; SHAPE: RD; FLAT; EA 5 101321 SHEET: MATERIAL: RUBBER NATURAL HESSIAN REINFORCED; DIMENSIONS: WD 1.2 M X LG 10 M X THK 6 MM; TYPE: INSERTION; 100 180461 GASKET, PRE CUT: DIMENSIONS: ID 610 X OD 640 X THK 664 MM; TYPE: EFP PUMP; MATERIAL: GRAPHITE; SHAPE: RD; USED ON EFP SUCTION STRAINER; EA 5 180462 GASKET, PRE CUT: DIMENSIONS: ID 717 X OD 747 X THK 773 MM; TYPE: EFP PUMP; MATERIAL: GRAPHITE; SHAPE: RD; USED ON EFP INTERMIDIATE STRAINER; EA 5 180463 GASKET, PRE CUT: DIMENSIONS: ID 920 X OD 960 X THK 991 MM; TYPE: SFP PUMP; MATERIAL: GRAPHITE; SHAPE: RD; USED ON SFP SUCTION STRAINER; EA 60 180464 GASKET, PRE CUT: DIMENSI