GRANULAR SUBBASE Sample Clauses

The 'Granular Subbase' clause defines the requirements for the layer of granular material placed beneath a pavement or road surface. It typically specifies the type of materials to be used, grading, compaction standards, and thickness, ensuring the subbase provides adequate support and drainage for the overlying pavement. For example, it may require the use of crushed stone or gravel compacted to a certain density. The core function of this clause is to ensure the stability and longevity of the pavement structure by providing a strong, well-drained foundation, thereby preventing premature failure or deformation of the road.
GRANULAR SUBBASE i) Pathway Structure Subbase Supply, place, grade, compact to specified density varying depth Pit-run or approved native fill from existing subgrade to underside of proposed granular base. M3 130 $ $
View SourceView Similar (2)
GRANULAR SUBBASE. Supply, place, grade, compact to specified density 600mm deep granular subbase material (as per City of Terrace Standards) from design subgrade to underside of proposed granular base within road prism (including sidewalks) as per Drawing 3. M3 2,678 $ $
View SourceView Similar (2)
GRANULAR SUBBASE. Sec. 304 & 1107 Combined Aggregate Sieve Analysis of Aggregate KT-2 a 300 m (1 000 ft), 500 t (500 TONS), or 500 m3 (500 yd3) Plasticity Tests KT-10 a 300 m (1 000 ft), 500 t (500 TONS), or 500 m3 (500 yd3) Moisture Tests KT-11 or g e Completed Work Field Density Tests KT-13 or KT-41 a 60 m (200 ft) Moisture Tests KT-11, KT-41 or g a 60 m (200 ft)
View Source
GRANULAR SUBBASE. The Contractor shall perform all Sieve Analysis, Plasticity Tests, Moisture Tests and Field Density Tests on the combined aggregate and completed work to meet acceptance requirements as required by the KDOT Construction Manual, “Sampling and Testing Frequency Charts.” Page 20c 0f 23
View Source

Related to GRANULAR SUBBASE

  • Power Factor Design Criteria (Reactive Power A wind generating plant shall maintain a power factor within the range of 0.95 leading to 0.95 lagging, measured at the Point of Interconnection as defined in this LGIA, if the ISO’s System Reliability Impact Study shows that such a requirement is necessary to ensure safety or reliability. The power factor range standards can be met using, for example without limitation, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors if agreed to by the Connecting Transmission Owner for the Transmission District to which the wind generating plant will be interconnected, or a combination of the two. The Developer shall not disable power factor equipment while the wind plant is in operation. Wind plants shall also be able to provide sufficient dynamic voltage support in lieu of the power system stabilizer and automatic voltage regulation at the generator excitation system if the System Reliability Impact Study shows this to be required for system safety or reliability.

  • Power Factor Design Criteria Developer shall design the Large Generating Facility to maintain an effective power delivery at demonstrated maximum net capability at the Point of Interconnection at a power factor within the range established by the Connecting Transmission Owner on a comparable basis, until NYISO has established different requirements that apply to all generators in the New York Control Area on a comparable basis. The Developer shall design and maintain the plant auxiliary systems to operate safely throughout the entire real and reactive power design range. The Connecting Transmission Owner shall not unreasonably restrict or condition the reactive power production or absorption of the Large Generating Facility in accordance with Good Utility Practice.

  • Salary Scale The salary scale applicable to Employees shall be set out hereinafter in the Wage Schedule.

  • STATEWIDE ACHIEVEMENT TESTING When CONTRACTOR is a NPS, per implementation of Senate Bill 484, CONTRACTOR shall administer all Statewide assessments within the California Assessment of Student Performance and Progress (“CAASPP”), Desired Results Developmental Profile (“DRDP”), California Alternative Assessment (“CAA”), achievement and abilities tests (using LEA-authorized assessment instruments), the Fitness Gram, , the English Language Proficiency Assessments for California (“ELPAC”), and as appropriate to the student, and mandated by LEA pursuant to LEA and state and federal guidelines. CONTRACTOR is subject to the alternative accountability system developed pursuant to Education Code section 52052, in the same manner as public schools. Each LEA student placed with CONTRACTOR by the LEA shall be tested by qualified staff of CONTRACTOR in accordance with that accountability program. ▇▇▇ shall provide test administration training to CONTRACTOR’S qualified staff. CONTRACTOR shall attend LEA test training and comply with completion of all coding requirements as required by ▇▇▇.

  • Low Census Low census is defined as a decline in patient care requirements resulting in a temporary staff decrease. During temporary periods of low census, the Employer will 1. Send home Agency nurses. 2. Cancel Overtime shifts. 3. Cancel incentive shifts. 4. Ask for volunteers. 5. Cancel reserve nurses. 6. Cancel part-time nurses working above their assigned FTE.