INSPECTION AND ACCEPTANCE OF THE WORK Sample Clauses

INSPECTION AND ACCEPTANCE OF THE WORK. Contractor shall report its progress to the City Project Manager as set forth herein. All services, work, and materials provided by Contractor under this Agreement shall be provided to the satisfaction and approval of the Project Manager. A. The Project Manager shall decide all questions regarding the quality, acceptability, and/or fitness of materials furnished, or workmanship performed, the rate of progress of the work, the interpretation of the plans and specifications, and the acceptable fulfillment of the Agreement, in his or her sole discretion, based upon both the requirements set forth by City and the information provided by Contractor in its Proposal. The authority vested in the Project Manager pursuant to this paragraph shall be confined to the direction or specification of what is to be performed under this Agreement and shall not extend to the actual execution of the work. B. Neither the Project Manager’s review of Contractor’s work nor recommendations made by Project Manager pursuant to this Agreement will impose on Project Manager any responsibility to supervise, direct, or control Contractor’s work in progress or for the means, methods, techniques, sequences, or procedures of construction or safety precautions or programs incident Contractor’s furnishing and performing the work.
View SourceView Similar (99)
INSPECTION AND ACCEPTANCE OF THE WORK. All services, work, and materials provided by Consultant under this Agreement shall be provided under the direction and to the satisfaction and approval of the Project Manager. A. The Project Manager shall decide all questions regarding the quality, acceptability, and/or fitness of materials, the rate of progress of the work, and the acceptable fulfillment of the Agreement, in his or her sole discretion, based upon both the requirements set forth by City and the information provided by Consultant in its Bid. The authority vested in the Project Manager pursuant to this paragraph shall be confined to the direction or specification of what is to be performed under this Agreement and shall not extend to the actual execution of the Services. B. Neither the Project Manager’s review of Consultant’s work nor recommendations made by Project Manager pursuant to this Agreement will impose on Project Manager any responsibility to supervise, direct, or control Consultant’s work in progress or for the means, methods, techniques, sequences, or safety precautions or programs incident to Consultant’s provision of Services under this Agreement.
View SourceView Similar (5)
INSPECTION AND ACCEPTANCE OF THE WORK. Contractor shall report its progress to the City Project Manager as set forth herein. All services, work, and materials provided by Vendor under this Agreement shall be provided to the satisfaction and approval of the Project Manager. All services, work, and materials provided by Contractor under this Agreement shall be provided under the direction and to the satisfaction and approval of the Project Manager. A. The Project Manager shall decide all questions regarding the quality, acceptability, and/or fitness of materials furnished, or workmanship performed, the rate of progress of the work, the interpretation of the plans and specifications, and the acceptable fulfillment of the Agreement, in his or her sole discretion, based upon both the requirements set forth by City and the information provided by Contractor in its Proposal. The authority vested in the Project Manager pursuant to this paragraph shall be confined to the direction or specification of what is to be performed under this Agreement and shall not extend to the actual execution of the work. B. Neither the Project Manager’s review of Contractor’s work nor recommendations made by Project Manager pursuant to this Agreement will impose on Project Manager any responsibility to supervise, direct, or control Contractor’s work in progress or for the means, methods, techniques, sequences, or procedures of construction or safety precautions or programs incident Contractor’s furnishing and performing the work.
View Source
INSPECTION AND ACCEPTANCE OF THE WORK. The College shall have 30 calendar days following receipt to inspect and accept the Work. Where the College discovers defective or non-conforming Work, the College may, at its option and without prejudice to any other rights or remedies it may have hereunder or at law: (a) reject the Work and, at the College’s option, obtain a refund or credit of any advance payments, if any have been made; (b) at Contractor’s expense, return goods for repair or replacement; or (c) at the College’s option, obtain a price reduction or re-performance of the Work at no charge to the College. No payment shall be due for the Work until the College has finally accepted the Work. If the College has not notified the Contractor of defects or non- conformances in the Work during the acceptance period, the College will be deemed to have accepted the Work.
View Source
INSPECTION AND ACCEPTANCE OF THE WORK a. Contractor shall provide the City with a written notice when it has it has completed the Work, and the City shall inspect the Work as soon as reasonably practicable to determine if Contractor has completed the Work in accordance with the terms of this Amendment and the Agreement. If the City determines that Contractor has complied with the terms of this Amendment and the Agreement, the City shall issue a written notice to Contractor accepting the Work. If the City determines that Contractor has not complied with the terms of this Amendment and the Agreement in completing the Work, the City shall provide Contractor with a written notice that explains the steps Contractor must take to cure any deficiencies with the Work. Except as provided in Paragraph 4.c, the Parties shall follow the inspection process set forth in this Section 4.a until the City accepts the Work, which acceptance the City shall not unreasonably withhold, condition, or delay. b. Any written acceptance issued by the City for the Work shall be conclusive as to the Work except with respect to latent defects, fraud, and such gross mistakes as amount to fraud. The City’s written acceptance of the Work shall waive any liquidated claims the City may have against Contractor for the chip seal application but shall not waive any other provisions of this Amendment and the Agreement, including any provisions related to bonds, warranties, and indemnity. c. If the City is unable to accept the Work after conducting two (2) inspections under Section 4.a, the City may, in its discretion, correct and replace any defective or faulty material or workmanship or non-conforming aspects of the Work or faulty material or workmanship used in the Work. Failure of the Contractor to complete the Work within two inspection cycles under Section 4.a shall also relieve the City of its obligations under Paragraph 2 to hold its liquidated damages in abeyance and shall entitle the City to submit a written demand to Contractor that describes the expenses the City incurred under this Section 4.
View Source
INSPECTION AND ACCEPTANCE OF THE WORK. ‌ 1. Any and all Acceptance(s) are subject to warranty, and any and all deficiencies discovered during inspection and testing shall be corrected as provided under the Article entitled “Warranty”. 2. If the Contractor does not promptly correct the deficiencies to the satisfaction of the Authority, the Authority may (1) replace or correct such Work by separate agreement, or otherwise, and charge the cost thereof to the Contractor or (2) terminate the Contractor's right to proceed in accordance with the provisions of the Article entitled Termination for Default herein. 3. Upon successful completion of the inspection and testing, the Authority will notify the Contractor of Acceptance in writing, at which time the Contractor is entitled to invoice and receive payment for the ULTRASONIC RAIL TESTING which have been accepted.
View Source
INSPECTION AND ACCEPTANCE OF THE WORK 
View Source

Related to INSPECTION AND ACCEPTANCE OF THE WORK

  • Inspection and Acceptance Where the Master Agreement, a Participating Addendum, or an Order does not otherwise specify a process for inspection and Acceptance, this section governs. This section is not intended to limit rights and remedies under the applicable commercial code. Contractor shall provide right of access to the Lead State, or to any other authorized agent or official of the Lead State or other Participating or Purchasing Entity, at reasonable times, in order to monitor and evaluate performance, compliance, and quality assurance requirements under this Master Agreement. Upon delivery, the Purchasing Entity shall have 30 days to inspect. Products that do not meet specifications may be rejected. Failure to reject upon receipt, however, does not relieve the contractor of liability for material (nonconformity that substantially impairs value) latent or hidden defects subsequently revealed when goods are put to use. Acceptance of such goods may be revoked in accordance with the provisions of the applicable commercial code, and the Contractor is liable for any resulting expense incurred by the Purchasing Entity related to the preparation and shipping of Product rejected and returned, or for which Acceptance is revoked. If any services do not conform to contract requirements, the Purchasing Entity may require the Contractor to perform the services again in conformity with contract requirements, at no increase in Order amount. When defects cannot be corrected by re-performance, the Purchasing Entity may require the Contractor to take necessary action to ensure that future performance conforms to contract requirements; and reduce the contract price to reflect the reduced value of services performed. The warranty period shall begin upon Acceptance. The Purchasing Entity will make every effort to notify the Contractor, within thirty (30) calendar days following delivery, of non-acceptance of a Product or completion of Service. In the event that the Contractor has not been notified within 30 calendar days from delivery of Product or completion of Service, the Product and Services will be deemed accepted on the 31st day after delivery of Product or completion of Services. This clause shall not be applicable, if acceptance testing and corresponding terms have been mutually agreed to by both parties in writing. Acceptance Testing may be explicitly set out in a Master Agreement to ensure conformance to an explicit standard of performance. Acceptance Testing means the process set forth in the Master Agreement for ascertaining that the Product meets the standard of performance prior to Acceptance by the Purchasing Entity. If Acceptance Testing is prescribed, this subsection applies to applicable Products purchased under this Master Agreement, including any additional, replacement, or substitute Product(s) and any Product(s) which are modified by or with the written approval of Contractor after Acceptance by the Purchasing Entity. The Acceptance Testing period shall be thirty (30) calendar days or other time period identified in this Master Agreement or the Participating Addendum, starting from the day after the Product is delivered or, if installed, the day after the Product is installed and Contractor certifies that the Product is ready for Acceptance Testing. If the Product does not meet the standard of performance during the initial period of Acceptance Testing, Purchasing Entity may, at its discretion, continue Acceptance Testing on a day-to-day basis until the standard of performance is met. Upon rejection, the Contractor will have fifteen (15) calendar days to cure the standard of performance issue(s). If after the cure period, the Product still has not met the standard of performance, the Purchasing Entity may, at its option: (a) declare Contractor to be in breach and terminate the Order; (b) demand replacement Product from Contractor at no additional cost to Purchasing Entity; or, (c) continue the cure period for an additional time period agreed upon by the Purchasing Entity and the Contractor. Contractor shall pay all costs related to the preparation and shipping of Product returned pursuant to the section. No Product shall be deemed Accepted and no charges shall be paid until the standard of performance is met. The warranty period shall begin upon Acceptance.

  • Inspection and Acceptance of Commodities The services provided by Contractor are not anticipated to include the provision of commodities. In the event commodities are offered under this contract, these provisions shall apply.

  • Acceptance of the Work 19.1 No act of, or failure to act by, the Owner or the OWNER'S REPRESENTATIVE during the course of the Work, nor any extension of time for the completion of the Work, shall be regarded as an acceptance of such Work or any part thereof, or of materials used therein, either wholly or in part. Acceptance shall be evidenced only by the Final Payment by the Owner to Contractor. Before any final certificate shall issue, Contractor shall execute an affidavit on the certificate that it accepts the same in full payment and settlement of all claims on account of Work done and materials furnished under this Contract, and that all claims for materials provided or labor performed have been paid or set aside in full. No waiver of any breach of this Contract by the Owner or anyone acting on Owner's behalf shall be held as a waiver of any other subsequent breach thereof. 19.2 Contractor agrees to guarantee all work under this Contract for a period of one year from the date of Final Payment by the Owner or within such longer period of time as may be prescribed by law or by the terms of any applicable special guarantee required under terms of Owner’s conditional acceptance of elements of the Work the Owner deems marginally substandard. If any unsatisfactory condition or damage develops within the time of this guarantee period due to materials or workmanship that are defective, inferior, or not in accordance with the Contract, as reasonably determined by the Owner or the OWNER’S REPRESENTATIVE, then the Contractor shall, when notified by the Owner or OWNER’S REPRESENTATIVE, immediately place such guaranteed Work in a condition satisfactory to the Owner or OWNER’S REPRESENTATIVE. Such guarantee shall be in addition to any implied warranty under law or other manufacturer’s or product supplier’s warranty. The provisions of this Article apply to Work done by Subcontractors as well as to Work done by direct employees of the Contractor, and are in addition to any other remedies or warranties provided by law.