Installation on the vehicle. 6.1. The engine installation on the vehicle shall comply with the following characteristics in respect to the approval of the engine: 6.1.1. intake depression shall not exceed that specified for the approved engine in Annex 2A; 6.1.2. exhaust back pressure shall not exceed that specified for the approved engine in Annex 2A; 6.1.3. power absorbed by the engine-driven auxiliaries shall not exceed that specified for the approved engine in Annex 2A; 6.1.4. volume of the exhaust system shall not differ by more than 40 per cent of that specified for the approved engine in Annex 2A.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Installation on the vehicle. 6.1. The engine installation on the vehicle shall comply with the following characteristics in respect to the approval of the engine:.
6.1.1. intake Intake depression shall not exceed that specified for the approved engine in Annex 2A;1A, Appendix 1.
6.1.2. exhaust Exhaust back pressure shall not exceed that specified for the approved engine in Annex 2A;1A, Appendix 1.
6.1.3. power absorbed by The operator shall be informed on the engine-driven auxiliaries shall not exceed that specified for the approved engine reagent control as defined in Annex 2A;
6.1.4. volume of the exhaust system shall not differ by more than 40 per cent of that specified for the approved engine in Annex 2A.paragraph 5.3.3.7.1., if applicable.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Installation on the vehicle. 6.1. The engine installation on the vehicle shall comply with the following characteristics in respect to the approval of the engine:.
6.1.1. intake Intake depression shall not exceed that specified for the approved engine in Annex 2A;annex 1, appendix 1.
6.1.2. exhaust Exhaust back pressure shall not exceed that specified for the approved engine in Annex 2A;
6.1.3. power absorbed by the engine-driven auxiliaries shall not exceed that specified for the approved engine in Annex 2A;
6.1.4. volume of the exhaust system shall not differ by more than 40 per cent of that specified for the approved engine in Annex 2A.annex 1, appendix 1.
Appears in 1 contract
Installation on the vehicle. 6.1. The engine installation on the vehicle shall comply with the following characteristics in respect to the approval of the engine:.
6.1.1. intake Intake depression shall not exceed that specified for the approved engine in Annex 2A;1A, Appendix 1 or 3 to this Regulation as applicable.
6.1.2. exhaust Exhaust back pressure shall not exceed that specified for the approved engine in Annex 2A;1A, Appendix 1 or 3 to this Regulation as applicable.
6.1.3. power absorbed by The operator shall be informed on the engine-driven auxiliaries shall not exceed that specified for the approved engine reagent control as defined in paragraph 5.3.3.7.1. above or Annex 2A;9 to this Regulation, if applicable.
6.1.4. volume of The OEM shall be provided with the exhaust system shall not differ by more than 40 per cent of that specified for the approved engine installation documents and instructions as defined in Annex 2A.paragraph 5.3.4.5. above, if applicable.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Installation on the vehicle. 6.1. The engine installation on the vehicle shall comply with the following characteristics in respect to the approval of the engine:.
6.1.1. intake Intake depression shall not exceed that specified for the approved engine in Annex 2A;1, Appendix 1.
6.1.2. exhaust Exhaust back pressure shall not exceed that specified for the approved engine in Annex 2A;
6.1.3. power absorbed by the engine-driven auxiliaries shall not exceed that specified for the approved engine in Annex 2A;
6.1.4. volume of the exhaust system shall not differ by more than 40 per cent of that specified for the approved engine in Annex 2A.1, Appendix 1.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Installation on the vehicle. 6.1. The engine installation on the vehicle shall comply with the following characteristics in respect to the type approval of the engine:.
6.1.1. intake Intake depression shall not exceed that specified for the type approved engine in Annex 2A;annex 2A.
6.1.2. exhaust back Exhaust back-pressure shall not exceed that specified for the type approved engine in Annex 2A;annex 2A.
6.1.3. Maximum power absorbed by the engine-driven auxiliaries equipment shall not exceed that the maximum permissible power specified for the type approved engine in Annex 2A;
6.1.4. volume of the exhaust system shall not differ by more than 40 per cent of that specified for the approved engine in Annex annex 2A.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Installation on the vehicle. 6.1. The engine installation on the vehicle shall comply with the following characteristics in respect to the approval of the engine:
6.1.1. intake Intake depression shall not exceed that specified for the approved engine in Annex 2A;
6.1.2. exhaust Exhaust back pressure shall not exceed that specified for the approved engine in Annex 2A;
6.1.3. power Power absorbed by the engine-driven auxiliaries shall not exceed that specified for the approved engine in Annex 2A;
6.1.4. volume Volume of the exhaust system shall not differ by more than 40 per cent of that specified for the approved engine in Annex 2A.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles