Laboratory Documentation Sample Clauses

Laboratory Documentation. Laboratory documentation may vary slightly between analytical laboratories. This section is intended to describe the general procedures of the analytical laboratories. Details for each analytical laboratory is provided in the laboratory QAM, included in Appendix A. It is anticipated each analytical laboratory will maintain the following records as part of the permanent record: ■ Chain-of-Custody records; ■ Sample receipt forms/tracking forms; ■ Workbooks; ■ Bench sheets; ■ Instrument logbooks; ■ Instrument printouts; ■ Analyst notes regarding the sample, analysis date, analytical procedures performed, instrument used, instrument calibration, and results on laboratory forms or notebooks that will be entered into the Laboratory Information Management System (LIMS); ■ Raw data records to allow reconstruction of initial instrument calibrations (i.e., calibration date, test method, instrument, analysis date, each analyte name, concentrations and responses, calibration curves, response factors, or unique equations or coefficients used to reduce instrument responses into calibrations); and ■ Corrective action reports, if required. Analytical laboratory data will be entered in ink and no erasures will be allowed. If an incorrect entry is made, the information will be crossed out with a single line and initialed. If pages are left intentionally blank, a diagonal line will be drawn across the page. Laboratory records will be reviewed periodically by the laboratory QA Director for accuracy, completeness, and compliance with the objectives of the QAPP and SAP. The laboratory QA Director will verify all entries and calculations and sign off on all data packages.
View Source

Related to Laboratory Documentation

  • Licensed Documentation If commercially available, Licensee shall have the option to require the Contractor to deliver, at Contractor’s expense: (i) one (1) hard copy and one (1) master electronic copy of the Documentation in a mutually agreeable format; (ii) based on hard copy instructions for access by downloading from the Internet

  • Manufacturing Technology Transfer Except as provided in Section 4.3(f)(iii)(1) and Section 6.10, with respect to any Collaboration Product (or LGC Reserved Product, if applicable) for which LGC (or its Affiliate) performed CMC Development or CMC Manufacturing, if (a) Cue does not elect for LGC to perform CMC Step 2, CMC Step 3, or CMC Step 4 (or with respect to LGC Reserved Products, upon completion of CMC Step 1), or (b) upon failure of the Parties to reach agreement with respect to a Clinical Supply Agreement or a Commercial Supply Agreement or (c) [***] under this Agreement and does not cure such breach within [***] days (provided, that if such breach is not reasonably capable of cure within such [***] day period, then such cure period shall be automatically extended for an additional [***] day period as long as LGC continues to use diligent efforts to cure such breach in accordance with a reasonable cure plan and if such breach is not reasonably capable of cure within such combined [***] day period, then Cue shall reasonably consider consenting to any extension of such cure period as long as LGC continues to use diligent efforts to cure such breach in accordance with a reasonable cure plan), as applicable, then, in each case upon the written request of Cue, LGC shall use Commercially Reasonable Efforts to make a technology transfer to an Approved CMO the Manufacturing processes (including materials and such other information) but solely as is necessary to enable the Manufacture of such Collaboration Product (including the Collaboration Compound therein) (or LGC Reserved Product, including the LGC Reserved Compound therein, if applicable) by such Approved CMO to comparable biochemical structure, quality and purity as that Manufactured by LGC or its Affiliate or CMO, provided that neither Cue, LGC or any Third Party shall perform such a technology transfer to any CMO [***] without LGC’s consent, not to be unreasonably withheld, conditioned or delayed if LGC has approved the CMO to manufacture Collaboration Products (or LGC Reserved Products, if applicable). LGC shall conduct such technology transfer as soon as reasonably practicable after receiving such written notice, using good faith efforts to support supply needed to achieve timelines in the Cue Territory Development Plan (or Cue’s development plan for LGC Reserved Products, if applicable) or Cue Territory Commercialization Plan, as applicable. LGC shall conduct the first technology transfer for each Collaboration Product (or LGC Reserved Products, if applicable) [***] (provided that [***]) for a period of up to [***] months from the date Cue or its designee has provided notice it is ready to receive the technology transfer, provided, that such [***] month period [***]. After the expiration of the initial such [***] month period for a Collaboration Product (or LGC Reserved Products, if applicable), if required to complete the technology transfer to enable the Manufacture of such Collaboration Product (including the Collaboration Compound therein) (or LGC Reserved Product, including the LGC Reserved Compound therein, if applicable) by such Approved CMO to comparable biochemical structure, quality and purity as that Manufactured by LGC, LGC shall continue to provide support to Cue for up to an additional [***] period for up to [***] hours at the FTE Rate and thereafter at [***]. Thereafter, LGC will also provide [***] for such Collaboration Product (or LGC Reserved Products, if applicable). Neither Cue nor its Affiliates or Cue Collaborators shall reverse engineer any materials provided hereunder by LGC. Notwithstanding anything in this Agreement to the contrary, LGC’s CMC information may only be shared with an Approved CMO.

  • Third Party Materials The Application may display, include, or make available third-party content (including data, information, applications, and other products, services, and/or materials) or provide links to third-party websites or services, including through third- party advertising ("Third-Party Materials"). You acknowledge and agree that Company is not responsible for Third-Party Materials, including their accuracy, completeness, timeliness, validity, copyright compliance, legality, decency, quality, or any other aspect thereof. Company does not assume and will not have any liability or responsibility to you or any other person or entity for any Third-Party Materials. Third-Party Materials and links thereto are provided solely as a convenience to you, and you access and use them entirely at your own risk and subject to such third parties' terms and conditions.

  • Background Screening VENDOR shall comply with all requirements of Sections 1012.32 and 1012.465, Florida Statutes, and all of its personnel who (1) are to be permitted access to school grounds when students are present, (2) will have direct contact with students, or (3) have access or control of school funds, will successfully complete the background screening required by the referenced statutes and meet the standards established by the statutes. This background screening will be conducted by SBBC in advance of VENDOR or its personnel providing any services under the conditions described in the previous sentence. VENDOR shall bear the cost of acquiring the background screening required by Section 1012.32, Florida Statutes, and any fee imposed by the Florida Department of Law Enforcement to maintain the fingerprints provided with respect to VENDOR and its personnel. The parties agree that the failure of VENDOR to perform any of the duties described in this section shall constitute a material breach of this Agreement entitling SBBC to terminate immediately with no further responsibilities or duties to perform under this Agreement. VENDOR agrees to indemnify and hold harmless SBBC, its officers and employees from any liability in the form of physical or mental injury, death or property damage resulting from VENDOR’s failure to comply with the requirements of this section or with Sections 1012.32 and 1012.465, Florida Statutes.

  • Regulatory Materials (a) On a Program-by-Program basis, commencing on the Effective Date until the Regulatory Transfer Date, Prothena shall have the right, in consultation with Celgene, to prepare, file and maintain all Regulatory Materials (including any Regulatory Approvals) necessary for the Development and Manufacture of any Collaboration Candidates and Collaboration Products for such Program (collectively, the “Program Regulatory Materials”), and to interact with Regulatory Authorities in connection with the Development and Manufacture of any Collaboration Candidates and Collaboration Products for such Program. Prothena will provide Celgene with a reasonable opportunity to comment substantively on all material Regulatory Materials prior to filing or taking material action, and will reasonably and in good faith consider any comments and actions recommended by Celgene, including with respect to filing strategy. In addition, Prothena will allow Celgene or its representative to attend any and all meetings with Regulatory Authorities to the extent such attendance is not prohibited or limited by such Regulatory Authority. (b) If Celgene exercises its Phase 1 Portion Participation Right for a given Program, then immediately after such exercise, Prothena shall initiate the transfer of all Program Regulatory Materials, including for clarity any IND for the relevant Collaboration Candidates and/or Collaboration Products that are the subject of such Program to Celgene. The date on which such Program Regulatory Materials are transferred to Celgene shall be the “Regulatory Transfer Date” for such Program. Thereafter, Celgene shall have the right, in consultation with Prothena, to prepare, file, and maintain such Program Regulatory Materials, and to interact with Regulatory Authorities in connection with the Development and, as applicable, Manufacture of such Collaboration Candidates and Collaboration Products for such Program in accordance with the terms and conditions of Section 2.5. Additionally, with respect to any Phase 1 Clinical Trial conducted by Celgene pursuant to Section 2.5, Celgene will provide Prothena with a reasonable opportunity to comment substantively on all material Program Regulatory Materials prior to filing or taking material action, and will reasonably and in good faith consider any comments and actions recommended by Prothena, including with respect to filing strategy. In addition, with respect to any Phase 1 Clinical Trial conducted by Celgene pursuant to Section 2.5, Celgene will allow Prothena or its representative to attend any and all meetings with Regulatory Authorities to the extent such attendance is not prohibited or limited by such Regulatory Authority. For clarity, if the Regulatory Transfer Date does not occur prior to the expiration of the Option Term for such Program, Section 2.6.1(a) (and not this Section 2.6.1(b)) shall apply.