Marking of Licensed Products To the extent commercially feasible and consistent with prevailing business practices, Company shall ▇▇▇▇, and shall cause its Affiliates and Sublicensees to ▇▇▇▇, all Licensed Products that are manufactured or sold under this Agreement with the number of each issued patent under the Patent Rights that applies to such Licensed Product.
Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY.
(b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item.
(c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.
SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this paragraph. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product. B Bid Contents Bid Evaluation Bid Opening Bid Submission 12 29 7 8 D Default - Authorized User Definitions Disqualification for Past Performance Drawings 63 5 35 25 E Emergency Contracts Employees/Subcontractors/Agents Equivalent or Identical Bids Estimated/Specific Quantity Contracts Ethics Compliance Expenses Prior to Contract Execution Extraneous Terms 43 55 33 42 3 19 13 F Facsimile Submissions Freedom of Information Law 9 16 I Indemnification Indemnification Relating to Third Party Rights Independent Contractor Installation Insurance Interest on Late Payments International Bidding 74 75 68 52 77 64 6 L Late Bids Legal Compliance Limitation of Liability 11 73 76 New York State Office of General Services, as part of its responsibility, recognizes the need to promote the employment of minority group members and women and to ensure that certified minority and women-owned business enterprises have opportunities for maximum feasible participation in the performance of OGS contracts. In 2006, the State of New York commissioned a disparity study to evaluate whether minority and women-owned business enterprises had a full and fair opportunity to participate in state contracting. The findings of the study were published on April 29, 2010, under the title "The State of Minority and Women-Owned Business Enterprises: Evidence from New York" (“the Disparity Study”). The report found evidence of statistically significant disparities between the level of participation of minority and women-owned business enterprises in state procurement contracting versus the number of minority and women-owned business enterprises that were ready, willing and able to participate in state procurements. As a result of these findings, the Disparity Study made recommendations concerning the implementation and operation of the statewide certified minority and women-owned business enterprises program. By submission of a bid or proposal in response to this solicitation, the Offerer agrees with all of the terms and conditions of Appendix A including Clause 12 - Equal Employment Opportunities for Minorities and Women. The contractor is required to ensure that it and any subcontractors awarded a subcontract over $25,000 for the construction, demolition, replacement, major repair, renovation, planning or design of real property and improvements thereon (the "Work") except where the Work is for the beneficial use of the Contractor, shall undertake or continue programs to ensure that minority group members and women are afforded equal employment opportunities without discrimination because of race, creed, color, national origin, sex, age, disability or marital status. For these purposes, equal opportunity shall apply in the areas of recruitment, employment, job assignment, promotion, upgrading, demotion, transfer, layoff, termination, and rates of pay or other forms of compensation. This requirement does not apply to: (i) work, goods, or services unrelated to this contract; or (ii) employment outside New York State. Contractor further agrees to submit with the bid a staffing plan (Form EEO 100) identifying the anticipated work force to be utilized on the Contract and if awarded a contract, will, upon request, submit to OGS a workforce utilization report (Form EEO 101) identifying the work force actually utilized on the Contract if known. For purposes of this procurement, OGS hereby establishes a goal of 11% for Minority-owned Business Enterprises (MBE) participation and 9% for Women-owned Business Enterprises (WBE) participation (collectively referred to as MWBE), for a total contract MWBE goal of 20%. A Contractor must document good faith efforts to provide meaningful participation by MWBEs as subcontractors or suppliers in the performance of this Contract and Contractor agrees that OGS may withhold payment pending receipt of the required MWBE documentation. The directory of New York State Certified MWBEs can be viewed at: ▇▇▇▇://▇▇▇.▇▇▇.▇▇.▇▇▇/MWBE.html. For guidance on how OGS will determine a Contractor’s “good faith efforts,” refer to 5 NYCRR §142.8. In accordance with 5 NYCRR §142.13, Offeror/Contractor acknowledges that if it is found to have willfully and intentionally failed to comply with the MWBE participation goals set forth in the Contract, such finding constitutes a breach of Contract and OGS may withhold payment from the Contractor as liquidated damages. Such liquidated damages shall be calculated as an amount equaling the difference between: (1) all sums identified for payment to MWBEs had the Contractor achieved the contractual MWBE goals; and (2) all sums actually paid to MWBEs for work performed or materials supplied under the Contract. By submitting a bid or proposal, Offeror/Contractor agrees to submit the following documents and information as evidence of compliance with the foregoing:
A. Offeror is required to submit a Utilization Plan on Form MWBE 100 with their bid or proposal. The Utilization Plan shall list the MWBEs the Contractor intends to use to perform the State contract and a description of the Contract scope of work that the Contractor intends to structure to meet the goals on the State contract, and the estimated or, if known, actual dollar amounts to be paid to and performance dates of each component of a State contract that the Contractor intends to be performed by a NYS Certified minority- or woman-owned business. Any modifications or changes to the agreed participation by NYS Certified M/WBEs after the Contract Award and during the term of the Contract must be reported on a revised M/WBE Utilization Plan and submitted to OGS.
B. OGS will review the submitted MWBE Utilization Plan and advise the Offeror of OGS acceptance or issue a notice of deficiency within 20 days of receipt.
C. If a notice of deficiency is issued, Offeror agrees that it shall respond to the notice of deficiency within seven (7) business days of receipt by submitting to the OGS Office of Minority and Women-Owned Enterprises, [35th Floor, ▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇ ▇▇▇▇▇ Phone: (▇▇▇) ▇▇▇-▇▇▇▇ Fax: (518) ▇▇▇- ▇▇▇▇], a written remedy in response to the notice of deficiency. If the written remedy that is submitted is not timely or is found by OGS to be inadequate, OGS shall notify the Offeror and direct the Offeror to submit, within five (5) business days, a request for a partial or total waiver of MWBE participation goals on Form MWBE101/BDC 333. Failure to file the waiver form in a timely manner may be grounds for disqualification of the bid or proposal.
D. OGS may disqualify an Offeror as being non-responsive under the following circumstances:
a) If an Offeror fails to submit a MWBE Utilization Plan;
b) If an Offeror fails to submit a written remedy to a notice of deficiency;
c) If an Offeror fails to submit a request for waiver; or
d) If OGS determines that the Offeror has failed to document good faith efforts. An Offeror who documents good faith efforts to meet the goal requirements may submit a request for a partial or total waiver on form MWBE 101/BDC 333, at the same time it submits its MWBE Utilization Plan. If a request for waiver is submitted with the MWBE Utilization Plan and is not accepted by OGS at that time, the provisions of clauses B-D above, will apply. A Contractor shall attempt to utilize, in good faith, any MBE or WBE identified within its MWBE Utilization Plan, during the performance of the Contract. Requests for a partial or total waiver of established goal requirements made subsequent to Contract Award may be made at any time during the term of the Contract to OGS, but must be made no later than prior to the submission of a request for final payment on the Contract. A Contractor is required to submit a Contractor’s Monthly Compliance & Payment Report on Form MWBE 102 to the OGS Office of Minority and Women-Owned Enterprises, [35th Floor, ▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇ ▇▇▇▇▇ Phone: (▇▇▇) ▇▇▇-▇▇▇▇ Fax: (▇▇▇) ▇▇▇-▇▇▇▇], by the 10th day of each month during the term of the Contract documenting the progress made toward achievement of the MWBE goals of the Contract.
Licensed Materials The materials that are the subject of this Agreement are set forth in Appendix A ("Licensed Materials").
Source Code License Subject to the terms and conditions of this ▇▇▇▇, if You separately acquire a Source Code License, You are licensed to use the Source Code. A separate independent Source Code License is also required for each affiliate or subsidiary using the SOFTWARE.
i. You expressly do not have, and are not granted the right to use the Source Code to create any derivative works.
ii. You expressly do not have, and are not granted the right to modify the SOFTWARE or its Source Code in any way unless the appropriate Source Code modification license has been purchased.
iii. Under no circumstances may the Source Code or any portion thereof be distributed, disclosed or otherwise made available to any third party outside of Your organization.
iv. GC shall retain all rights, title and interest in and to the licensed Source Code, and all GC updates, modifications or enhancements thereof. Nothing herein shall be deemed to transfer any ownership or title rights in and to the licensed Source Code from GC to You.
v. THE SOURCE CODE IS PROVIDED TO YOU AS IS. GC DOES NOT AND SHALL NOT PROVIDE YOU WITH ANY TECHNICAL SUPPORT, OR ANY AUTOMATIC UPDATES OR UPGRADES FOR YOUR SOURCE CODE LICENSE.