Light Fixtures Clause Samples

Light Fixtures. Piping that must be drainable, such as plumbing wastes, vents, short drain lines, steam and condensate, and refrigeration.

Light Fixtures. All fixtures shall be of a recessed nature and flush with the ceiling. All fixtures shall be subject to Landlord's approval, not to be unreasonably withheld.

Light Fixtures. Twice a year – light fixtures and exit signs shall be cleaned so that they are free of all dirt, dust, insects, and smears.

Light Fixtures. Light fixtures with glass globes, fluorescent lenses, and/or fluorescent tubes shall be cleaned so that they are free of all dirt, dust, insects, and smears. If lights are out, the Contractor shall notify no site staff or the COR before end of shift.

Light Fixtures. No electrical fixtures shall be hung or otherwise installed in the Premises other than those supplied by or otherwise agreed to by Owner.

Light Fixtures clean globes, outlet covers and replace light bulbs.

Light Fixtures. Incandescent, PL and fluorescent light fixtures shall be supplied and installed as shown in the drawings. Major types of fixtures are as briefly described below. All fixtures described shall be of an approved manufacture indicated in the article N-52 Brand of manufacturers. If fixtures of an alternate manufacture are offered, sufficient testimony must be provided to substantiate its equality with the product recommended. a. Fluorescent fixtures shall generally be surface mounted with 1x36 W, or 2x36 W energy efficient fluorescent tubes with good colour rendering qualities with sturdy, corrosion free metal body and mounting channel with required type of reflectors, diffusers or optical assemblies. High quality, low loss, high accuracy current ballast and chokes shall feature copper windings. A capacitor shall be included in the fixture to maintain power factor 0.8 lagging. High quality starters shall be of an approved manufacturer capable of generating adequate voltage to quickly ignite the type of tube used. A glow-switch and a radio interference suppressor capacitor shall be built into the starter assembly, which shall be moulded from high quality white polycarbonate canister with good insulation characteristics. b. Ceiling compact fluorescent lamp luminaries in single or multi-configuration shall generally be 200 mm dia. clear glass spheres with ballast, pin holders even light diffusion characteristics housed in a non-corrosive sturdy spun metal body. An 11W CFL lamp or as recommend by the owner/Engineer for sufficient lumens shall be used with such fixtures. c. Wall fixtures shall generally be decorative light fixtures compatible with interior decor. The fixtures shall be 200 mm dia. frosted sphere and shall have one 9/11 W PL lamps as shown in the drawings. The lamps shall be consoled in a high quality of decorative glass fixture. The housing shall be of sturdy non-corrosive spun metal (brass). d. Light fixtures used for outdoor application either as Bulk head lights fixtures shall be integrally weatherproof with rubber gaskets or other approved means to exclude entry of water.

Light Fixtures. The Landlord shall clean and maintain the light fixtures provided by the Landlord in the Leased Premises, it being agreed by the Tenant that such cleaning and maintenance shall be performed exclusively by the Landlord or its contractors at the sole expense of the Tenant.

Light Fixtures. One (1) 2’x 4’ lay–in fluorescent fixture with Prismatic lens will be provided for every seventy–five (75) square feet of leased area.