Common use of Lighting Systems Clause in Contracts

Lighting Systems. a. Fixtures shall be suitable for the application including the ability to provide egress illumination where required. Egress light shall be wired and remain on a night lights. b. Fixtures shall meet U.L requirements and selection and placement of fixtures shall comply with AD A requirements. c. All lighting fixtures shall operate at 277V unless specifically noted otherwise. d. Lighting Power Densities (LPD) must exceed with the Title 24 energy savings by 25%—35% to comply with LEED Silver Certification efforts. e. Office area to consist of direct/indirect linear pendant style fixtures or recessed direct/indirect light fixtures type: Focal Point Skylite 2’xZ, FBX-24-B Perforated Shield, White, ▇▇▇▇▇▇▇ and voltage to be confirmed. Landlord reserves the right to determine use and location ol either style of fixture. f. Exit Lights—Lithonia LRP, Green on clear, 120/277, EL N, 4 Lighting Control Systems a. Lighting control must comply with Title 24 requirements (including over-ride control for automatically shutting the lights off at prescribed periods of time and the ability to over-ride the lighting control for up to two hours of use). b. Lighting control equipment shall include a programmable lighting control panel, relay panels {quantity as necessary), over-ride switches (distributed throughout the space), and interconnecting conductors. c. Control zones to include perimeter areas for dayi spaces, skylit areas, and interior areas under 5,OOOSF. d. Lighting over-rids switches to be located in corridors and similar areas to allow ease of access. e. Each r ootn sha 11 b e con tro I led b y dua I -le vel switch i ng f or local co ntro I. f. Each private enclosed office to be provided with wall mounted dual-level switching and a ceiling mounted override motion sensor. Manufacturer: ▇▇▇▇▇▇▇ or equal.