Material Specifications. In order to obtain minimum standards for the development of the bus terminal components, various materials are specified for selected items of works. The concessionaire shall use the material specified in the table below for the construction of the bus terminal and the ancillary facilities. 1 Flooring / Skirting / Dado Offices, Stores, Waiting Halls, Dormitories, Rest Rooms Stores, Dormitories, Rest rooms: · Flooring: Vitrified tiles with minimum size of 60cm x 60cm · Skirting: 10.0 cm high of Vitrified tile Waiting rooms, Offices: · Flooring: Vitrified tiles · Skirting: 10.0 cm high of Vitrified tile B Passenger Circulation Area and Canteen/ Restaurant, Shops, Booths Flooring: Vitrified tiles with minimum size of 60cm x 60cm Skirting: 10.0 cm high skirting of Vitrified Tiles Dado: 135 cm high dado of Vitrified Tiles Passenger Platform Rough Kota Stone with minimum size of 60cm x 60cm (38 mm thick) Staircase With unpolished granite (15 mm thick) C Toilet Blocks Flooring: Granite (12 mm thick) Skirting: 10.0 cm high skirting of Granite Dado: 135 cm Granite/dado up to lintel height D Bus Ticket Counter, Enquiry Counter, Reservation Counter, Information Centre Top, Wash Basin Slab Tops in and table tops of Kitchen/Pantry Polished Granite (38 mm thick) in single piece as far as possible. E Electric Sub Station/Generator Room Ironite Flooring (50 mm thick) F Kitchen/Pantry Flooring: Granite stone (38 mm thick) with stone size 60 cm x 60 cm Skirting: 10.0 cm high skirting of Granite stone (38 mm thick) Dado: 47.5 cm high dado of Granite stone (1.5’’ thick) above the counter top G Ramp With rough Kota Stone/staggered granite (38 mm thick) H In general Flooring : 50mm thick Cement Concrete— M35 grade Skirting : 30cm high skirting of Polished Kota Stone (38 mm thick) I Basement Cement Concrete Flooring A Brick Walls, Concrete members connected with brick work Walls shall be in cement mortar (1:4) plastered (12mm thick inside face and 20mm thick external face) and painted with oil bound distemper above skirting / dado after applying of putty, primer to give a perfect even surface B Reinforced Cement Concrete RCC slab ceilings shall be plastered with 12 mm thick in CM 1:4. Columns in the platform area shall have faulted vertical surfaces painted in sandtex matt cement paint of Dholpur stone colour shade. (Painting shall be done after the 12 mm thick cement plaster 1:4 mix) C Internal Finishing of the Terminal Building 12 mm thick cement plaster 1:4 mix and shall be painted with oil bounded distemper D External Finishing of the Terminal Building (i) Platform Wall The surfaces shall be of Marble/Stone/aluminum composite panels cladding/Glass/HPL or any other material with good aesthetics. Remaining walls facing towards platform shall be plastered (20 mm single mala) above 135 cm high granite stone dado and painted with oil bound distemper E Internal wooden and steel joinery Painted with Synthetic Enamel 1st quality of approved shade 3 Joinery / Doors / Windows / Shutters /Ventilators A Offices, Stores, Waiting Room, Dormitories, Rest Rooms Joinery: All doors and windows chowkhats shall be 16 gauge pressed steel double or single rebate as per requirement, prefilled with 1:3:6 cement concrete, as per PWD Building Specifications. Doors: All door shutters shall be 40 mm thick teak wood with 12 mm thick panels of water proof as per PWD Building Specifications. Windows: Window shutters shall be 35 mm thick of teak wood having glass panes as per PWD Building Specifications. Wire gauge shutters shall be provided wherever required. Cupboard Frame/Shutters: Teak wood as per PWD Building Specifications. Glazing: Plain or Tinted glass of minimum thickness 5 mm. Shutters : Rolling Shutters B Counters, Reservation Counters, Information Counters Windows : Windows (size 2m x 1m) with plain glass panes covered with window grill on the external side made of MS sections as per PWD Building Specifications, having suitable openings for public interface C Bus Ticket Counters Windows: Windows (size 2m x 1m) with window grill on the external side made of MS sections as per PWD Building Specifications, having suitable openings for public interface D Toilets PVC flush doors E Water Proofing Works Water proofing of basement as per PWD Building Specifications (Box type water proofing) 4 Furniture A Waiting Halls Chairs: Stainless steel chairs with back rest, grouted/fixed to the floor of approved make of Godrej etc. Tables: Steel framework with 20 mm thick wooden/board top, finished with lamination of approved make with lock and key arrangement. B Offices Chairs : Office Chairs of approved make Tables : Steel structure with 20 mm thick wooden/board top, finished with sunmica (lamination) of approved make Cupboards: Factory made steel cupboards of approved make 5 External Works A Pavement-Bus Terminal Circulation Area 30 cm thick Cement Concrete Pavement. M35 grade in panels of size 3m X 3mm with steel reinforcement at corner 0.9m x 0.9m width 8mm dia. Steel @ 150mm c/c laid over 100mm thick lean concerete 1:3:6 including 6mm thick fine sand uniformaly spread with providing laying in portion separation membrane of impermeable polythene sheet 125 micron over lap width 300mm nailing to lower surface making 12mm expansion joint with 220 mm shaitax board as per CRRI specification The rigid pavement shall be designed as per IRC: 58-2015. Construction of rigid pavement shall conform to MORT&H Specifications. B Pavement-Parking Area for vehicles 20 cm thick Cement Concrete Pavement. M30 grade in panels of size 3m X 3mm with steel reinforcement at corner 0.9m x 0.9m width 8mm dia. Steel @ 150mm c/c laid over 100mm thick lean concerete 1:3:6 including 6mm thick fine sand uniformaly spread with providing laying in portion separation membrane of impermeable polythene sheet 125 micron over lap width 300mm nailing to lower surface making 12mm expansion joint with 220 mm shaitax board as per CRRI specification Parking area should be covered and paved. M25 grade interlocking pavers of 80 mm thickness should be provided over 30 mm sand layer. Boundary Wall The boundary wall of the bus terminal shall be 1.75m high, plastered 20mm on both sides of the wall with oil bound distemper on both the sides. C ▇▇▇▇▇ and Precast Channel Stones For all internal roads shall cement concrete as per PWD Specifications D Bus Stoppers RCC and RS Joists E Platform Nosing 7.5 cm x 7.5 cm MS angle F Railing Stainless steel G Footpaths/ Passenger entry- exit RoughKota /Nimbaheda/MandanaStone(38 mm thick) H Ramps Cement concrete (M30 grade) I Plinth Protection 60 cm to 90 cm plinth protection of 38 cm thick M20 cement concrete laid over 10cm thick lean concrete M10 and 10cm thick sand combined with toe wall wherever required J Water Proofing Laying integral type (India type) cement based water proofing system using brickbats with the approved water proofing Compounds K Pedestrian concourse area Nimbaheda / Mandana Stone (38 mm thick) 6 BUS-Q-SHELTERS FOR CITY BUSES A Flooring Stable and anti skid type, concrete or pre polished concrete designer tiles 20 mm thick of approved colour, shape and pattern, in floor jointed with neat cement slurry/binding material, over a bed of 150 mm cement concrete mix of 1:4:8 and 50mm thick cement mortar of 1:6 mix. The tactile tiles to be laid as per provisions for physically challenged. B Steel Work as Sub Structure Pre fab to the extent possible, either Mild Steel in built up tubular trusses or of any other material with the approval of Independent Engineer.
Appears in 2 contracts
Sources: Concession Agreement, Concession Agreement
Material Specifications. In order to obtain minimum standards for the development of the bus terminal components, various materials are specified for selected items of works. The concessionaire shall use the material specified in the table below for the construction of the bus terminal and the ancillary facilities. 1 Flooring / Skirting / Dado A Offices, Stores, Waiting Halls, Dormitories, ,Rest Rooms Stores, Dormitories, Rest rooms: · Flooring: Vitrified tiles with minimum size of 60cm x 60cm · Skirting: 10.0 cm high of Vitrified tile Waiting rooms, Offices: · Flooring: Vitrified tiles · Skirting: 10.0 cm high of Vitrified tile B Passenger Circulation Area and Canteen/ Restaurant, Shops, Booths Flooring: Vitrified tiles with minimum size of 60cm x 60cm Skirting: 10.0 cm high skirting of Vitrified Tiles Dado: 135 cm high dado of Vitrified Tiles Passenger Platform Rough Kota Stone with minimum size of 60cm x 60cm (38 mm thick) Staircase With unpolished granite (15 mm thick) C Toilet Blocks Flooring: Granite (12 mm thick) Skirting: 10.0 cm high skirting of Granite Dado: 135 cm Granite/dado up to lintel height D Bus Ticket Counter, Enquiry Counter, Reservation Counter, Information Centre Top, Wash Basin Slab Tops in and table tops of Kitchen/Pantry Polished Granite (38 mm thick) in single piece as far as possible. E Electric Sub Station/Generator Room Ironite Flooring (50 mm thick) F Kitchen/Pantry Flooring: Granite stone (38 mm thick) with stone size 60 cm x 60 cm Skirting: 10.0 cm high skirting of Granite stone (38 mm thick) Dado: 47.5 cm high dado of Granite stone (1.5’’ thick) above the counter top G Ramp With rough Kota Stone/staggered granite (38 mm thick) H In general Flooring : 50mm thick Cement Concrete— M35 grade Skirting : 30cm high skirting of Polished Kota Stone (38 mm thick) I Basement Cement Concrete Flooring A Brick Walls, Concrete members connected with brick work Walls shall be in cement mortar (1:4) plastered (12mm thick inside face and 20mm thick external face) and painted with oil bound distemper above skirting / dado after applying of putty, primer to give a perfect even surface B Reinforced Cement Concrete RCC slab ceilings shall be plastered with 12 mm thick in CM 1:4. Columns in the platform area shall have faulted vertical surfaces painted in sandtex matt cement paint of Dholpur stone colour shade. (Painting shall be done after the 12 mm thick cement plaster 1:4 mix) C Internal Finishing of the Terminal Building 12 mm thick cement plaster 1:4 mix and shall be painted with oil bounded distemper D External Finishing of the Terminal Building (i) Platform Wall The surfaces shall be of Marble/Stone/aluminum composite panels cladding/Glass/HPL or any other material with good aesthetics. Remaining walls facing towards platform shall be plastered (20 mm single mala) above 135 cm high granite stone dado and painted with oil bound distemper E Internal wooden and steel joinery Painted with Synthetic Enamel 1st quality of approved shade 3 Joinery / Doors / Windows / Shutters /Ventilators / Ventilators A Offices, Stores, Waiting Room, Dormitories, Rest Rooms Joinery: All doors and windows chowkhats shall be 16 gauge pressed steel double or single rebate as per requirement, prefilled with 1:3:6 cement concrete, as per PWD Building Specifications. Doors: All door shutters shall be 40 mm thick teak wood with 12 mm thick panels of water proof as per PWD Building Specifications. Windows: Window shutters shall be 35 mm thick of teak wood having glass panes as per PWD Building Specifications. Wire gauge shutters shall be provided wherever required. Cupboard Frame/Shutters: Teak wood as per PWD Building Specifications. Glazing: Plain or Tinted glass of minimum thickness 5 mm. Shutters : Rolling Shutters B Counters, Reservation Counters, Information Counters Windows : Windows (size 2m x 1m) with plain glass panes covered with window grill on the external side made of MS sections as per PWD Building Specifications, having suitable openings for public interface C Bus Ticket Counters Windows: Windows (size 2m x 1m) with window grill on the external side made of MS sections as per PWD Building Specifications, having suitable openings for public interface D Toilets PVC flush doors E Water Proofing Works Water proofing of basement as per PWD Building Specifications (Box type water proofing) 4 Furniture A Waiting Halls Chairs: Stainless steel chairs with back rest, grouted/fixed to the floor of approved make of Godrej etc. Tables: Steel framework with 20 mm thick wooden/board top, finished with lamination of approved make with lock and key arrangement. B Offices Chairs : Office Chairs of approved make Tables : Steel structure with 20 mm thick wooden/board top, finished with sunmica (lamination) of approved make Cupboards: Factory made steel cupboards of approved make 5 External Works A Pavement-Bus Terminal Circulation Area 30 cm thick Cement Concrete Pavement. M35 grade in panels of size 3m X 3mm with steel reinforcement at corner 0.9m x 0.9m width 8mm dia. Steel @ 150mm c/c laid over 100mm thick lean concerete 1:3:6 including 6mm thick fine sand uniformaly spread with providing laying in portion separation membrane of impermeable polythene sheet 125 micron over lap width 300mm nailing to lower surface making 12mm expansion joint with 220 mm shaitax board as per CRRI specification The rigid pavement shall be designed as per IRC: 58-2015. Construction of rigid pavement shall conform to MORT&H Specifications. B Pavement-Parking Area for vehicles 20 cm thick Cement Concrete Pavement. M30 grade in panels of size 3m X 3mm with steel reinforcement at corner 0.9m x 0.9m width 8mm dia. Steel @ 150mm c/c laid over 100mm thick lean concerete 1:3:6 including 6mm thick fine sand uniformaly spread with providing laying in portion separation membrane of impermeable polythene sheet 125 micron over lap width 300mm nailing to lower surface making 12mm expansion joint with 220 mm shaitax board as per CRRI specification Parking area should be covered and paved. M25 grade interlocking pavers of 80 mm thickness should be provided over 30 mm sand layer. Boundary Wall The boundary wall of the bus terminal shall be 1.75m high, plastered 20mm on both sides of the wall with oil bound distemper on both the sides. C ▇▇▇▇▇ and Precast Channel Stones For all internal roads shall cement concrete as per PWD Specifications D Bus Stoppers RCC and RS Joists E Platform Nosing 7.5 cm x 7.5 cm MS angle F Railing Stainless steel G Footpaths/ Passenger entry- exit RoughKota /Nimbaheda/MandanaStone(38 Rough Kota / Nimbaheda / Mandana Stone (38 mm thick) H Ramps Cement concrete (M30 grade) I Plinth Protection 60 cm to 90 cm plinth protection of 38 cm thick M20 cement concrete laid over 10cm thick lean concrete M10 and 10cm thick sand combined with toe wall wherever required J Water Proofing Laying integral type (India type) cement based water proofing system using brickbats with the approved water proofing Compounds K Pedestrian concourse area Nimbaheda / Mandana Stone (38 mm thick) 6 BUS-Q-SHELTERS FOR CITY BUSES A Flooring Stable and anti skid type, concrete or pre polished concrete designer tiles 20 mm thick of approved colour, shape and pattern, in floor jointed with neat cement slurry/binding material, over a bed of 150 mm cement concrete mix of 1:4:8 and 50mm thick cement mortar of 1:6 mix. The tactile tiles to be laid as per provisions for physically challengedphysicallychallenged. B Steel Work as Sub Structure Pre fab to the extent possible, either Mild Steel in built up tubular trusses or of any other material with the approval of Independent Engineer.
Appears in 1 contract
Sources: Concession Agreement