Common use of MECHANICAL COMPONENTS Clause in Contracts

MECHANICAL COMPONENTS. 6.15.1 Metallic frame structure of galvanized steel with stands to be fixed on the roof/terrace to hold the SPV module (s) above roof level and clearance between roof/terrace level and PV module shall be kept as per relevant IEC/BIS norms. Concrete foundations of appropriate weight and depth for elevated structures mounted directly on the roof/terrace; bolted with anchor bolts of appropriate strength for elevated structures mounted on RCC foundation. 6.15.2 Civil Foundation for Solar PV Module Mounting Structure (MMS): The foundations shall be designed considering the weight and distribution of the structure and assembly, and a maximum wind speed. Seismic factors for the site to be considered while making the foundation design. Foundations shall be made following the Indian Standard Codes, with the help of Registered Structural Designer having substantial experience in similar work. Bidder shall submit the detailed structural design analysis along with calculations and bases/standards. 6.15.3 The successful bidder shall design and construct appropriate civil foundations for MMS, prefabricated structures, etc. The design of the RCC foundation shall be approved by RMC. 6.15.4 The frame structure should have provision to adjust at a necessary angle of inclination to the horizontal, so that it can be installed at the specified tilt angle i.e. inclined at the necessary degree to horizontal facing to the south. All hardware, nuts, bolts should be SS - 304.

MECHANICAL COMPONENTS. 6.15.1 Metallic frame structure of galvanized steel with stands to be fixed on the roof/terrace to hold the SPV module (s) above roof level and clearance between roof/terrace level and PV module shall be kept as per relevant IEC/BIS norms. Concrete foundations of appropriate weight and depth for elevated structures mounted directly on the roof/terrace; bolted with anchor bolts of appropriate strength for elevated structures mounted on RCC foundation. 6.15.2 Civil Foundation for Solar PV Module Mounting Structure (MMS): The foundations shall be designed considering the weight and distribution of the structure and assembly, and a maximum wind speed. Seismic factors for the site to be considered while making the foundation design. Foundations shall be made following in accordance with the Indian Standard Codes, with the help of Registered Structural Designer having substantial experience in similar work. Bidder shall submit the detailed structural design analysis along with calculations and bases/bases / standards. 6.15.3 The successful Successful bidder shall design and construct appropriate civil foundations for MMS, prefabricated structures, etc. The design of the RCC foundation shall be approved by RMC. 6.15.4 The frame structure should have provision to adjust at a necessary angle of inclination to the horizontal, so that it can be installed at the specified tilt angle i.e. inclined at the necessary degree to horizontal facing to the south. All hardware, nuts, bolts should be SS - 304.