Merrimack Station Sample Clauses

Merrimack Station. 487 Merrimack Station is located south of the Garvins Falls Hydroelectric Project, 488 along the Merrimack River in Bow, New Hampshire. Generating units include coal- 489 fired Units 1 and 2 and peaking units CT1 and CT2. 490 b. ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ is located on a site of more than 50 acres, along the banks 492 of the Piscataqua River in Newington, New Hampshire. Generation includes oil or gas 493 fueled Unit 1. 494 ▇. ▇▇▇▇▇▇▇▇ Station 495 Schiller Station is located east of Newington Station, on the southerly shore of 496 the Piscataqua River in Portsmouth, New Hampshire. Generating units include coal or 497 oil fired Units 4 and 6, biomass or coal fired Unit 5, and peaking unit CT1. 498 2. Hydro Facilities: 499 ▇. ▇▇▇▇▇ Station 500 ▇▇▇▇▇ Station is located on the Androscoggin River in Berlin, Coos County, 501 New Hampshire near the confluence of the Dead River and the Androscoggin River. 502 ▇. ▇▇▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇▇▇▇ is located on the Androscoggin River in the Town of Gorham, 504 Coos County, New Hampshire, near the confluence of the Peabody River and the 505 Androscoggin River.
View SourceView Similar (3)
Merrimack Station. Merrimack Station is located south of the Garvins Falls Hydroelectric Project, along the Merrimack River in Bow, New Hampshire. Merrimack Station Generating Facilities: Seasonal claimed Year Unit Load role Fuel capability(winter)(MW) Installed Unit 1 Base load Coal 122.3 1960 Unit 2 Base load Coal 353.5 1968 CT-1 Peaking Jet 21.1 1968
View SourceView Similar (2)
Merrimack Station. Merrimack Station is located south of the Garvins Falls Hydroelectric Project, along the Merrimack River in Bow, New Hampshire. Merrimack Station Generating Facilities: 2180 Unit Load role Fuel Seasonal claimed capability (winter) (MW) Year installed Unit 1 Base load Coal 122.3 1960 Unit 2 Base load Coal 353.5 1968 CT-1 Peaking Jet 21.1 1968 CT-2 Peaking Jet 21.1 1969 Total 518.0 2181 2182 2183 Merrimack Station is PSNH’s prime base load facility with combined generating 2184 capacity from the two coal-fired steam units and two jet fuel-fired Combustion Turbine units 2185 of 518.0 MW. The two coal-fired units are operated by personnel onsite 24 hours a day, 2186 seven days a week. While the units operate in the base load role most of the time, they can be 2187 reduced in load during off-peak hours. With this capability, these units can provide capacity, 2188 energy and reserve products transacted at the ISO New England power markets. 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 The two combustion turbine units mainly serve a peaking role, operating during periods of highest seasonal peak demand or when generation is needed quickly to maintain electrical system stability. These units typically serve the capacity and reserve markets, and not the energy market. In addition to these units, the Merrimack site includes numerous outbuildings, including the Coal Unloading System and Coal Crusher House, office and storage facilities, as well as a fly ash disposal area.
View Source
Merrimack Station. None. Schiller Station
View Source

Related to Merrimack Station

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at a P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Telemedicine Services This plan covers clinically appropriate telemedicine services when the service is provided via remote access through an on-line service or other interactive audio and video telecommunications system in accordance with R.I. General Law § 27-81-1. Clinically appropriate telemedicine services may be obtained from a network provider, and from our designated telemedicine service provider. When you seek telemedicine services from our designated telemedicine service provider, the amount you pay is listed in the Summary of Medical Benefits. When you receive a covered healthcare service from a network provider via remote access, the amount you pay depends on the covered healthcare service you receive, as indicated in the Summary of Medical Benefits. For information about telemedicine services, our designated telemedicine service provider, and how to access telemedicine services, please visit our website or contact our Customer Service Department.

  • Digital Health The HSP agrees to: (a) assist the LHIN to implement provincial Digital Health priorities for 2017-18 and thereafter in accordance with the Accountability Agreement, as may be amended or replaced from time to time; (b) comply with any technical and information management standards, including those related to data, architecture, technology, privacy and security set for health service providers by MOHLTC or the LHIN within the timeframes set by MOHLTC or the LHIN as the case may be; (c) implement and use the approved provincial Digital Health solutions identified in the LHIN Digital Health plan; (d) implement technology solutions that are compatible or interoperable with the provincial blueprint and with the LHIN Cluster Digital Health plan; and (e) include in its annual Planning Submissions, plans for achieving Digital Health priority initiatives.

  • Television Equipment Recycling Program If this Contract is for the purchase or lease of covered television equipment, then Contractor certifies that it is compliance with Subchapter Z, Chapter 361 of the Texas Health and Safety Code related to the Television Equipment Recycling Program.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If WCS chooses to subtend a Verizon access Tandem, WCS’s NPA/NXX must be assigned by WCS to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 WCS shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from WCS’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office WCS utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow WCS’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.