Method of Analysis Clause Samples

The "Method of Analysis" clause defines the specific procedures, standards, or techniques that must be used to evaluate, test, or measure certain aspects of a contract or its subject matter. This clause typically outlines which analytical methods are acceptable, such as referencing industry standards, laboratory protocols, or agreed-upon testing procedures, and may specify who is responsible for conducting the analysis. Its core practical function is to ensure consistency and objectivity in how results are determined, thereby reducing disputes and providing clarity for both parties regarding the evaluation process.
POPULAR SAMPLE Copied 1 times
Method of Analysis. In each analysis, the nuisance of field from each potentially interfering transmitter was calculated at the site of the wanted transmitter by the method given in section 3.5 of Chapter 3. The usable field strength, Eu, was then calculated by the simplified multiplication method, taking into account the 20 largest values of nuisance field, specified to one decimal place. For the analysis of the Plan during the Conference, the simplified multiplication method was used for the whole of the planning area; however, for comparison purposes, the power sum method1 was also used. Sharing the television broadcasting in the European Broadcasting Area operating in accordance with the Regional Agreement (Stockholm, 1961) in the band 87.5 - 100 MHz (see Chapter 5) was taken into account. The method of analysis used during the Conference with respect to compatibility with the aeronautical radionavigation service in the band 108 - 117.975 MHz is described in Chapter 7. 1 For further information see CCIR Recommendation 499-2. Annex 2 – 46 –
View SourceView Similar (3)
Method of Analysis. For Novelis and Novelis associated ingot producers the Molten Metal Processing group shall approve the spectrometer, methods and standards used in the determination of chemical composition. Any changes from approved equipment, standards, or analytical techniques require notification and approval by the Molten Metal Processing group and notification to Novelis Hot Mill Process Groups and contracted tollers before implementation. The method of analysis used shall meet the requirements of ***. For third party ingot producers, their analytical capability must be verified before delivery of ingot can commence. Suppliers must be able to supply statistical evidence as to the accuracy, reproducibility, and reliability of their spectrochemical analytical processes and equipment. Control charts of the periodic analysis of control samples is a simple means of fulfilling this requirement. Novelis can provide suitable control sample material upon request. All suppliers shall be required to ***. Disagreements must be reconciled promptly. Suppliers must be prepared, if requested by Novelis Rolling Plants and contracted tollers, to ***.
View Source
Method of Analysis. Gas Chromatograph equipped with Flame Ionization Detector, using 3 to 4 point calibrations Product Description: >45% - mixed fatty acid esters >36% Cetyl Myristoleate Complex (Combination of cetyl myristoleate and cetyl myristate, at least 40% of which is cetyl myristoleate) < 3% silicon dioxide
View Source
Method of Analysis. The following section of the master's thesis will present a detailed overview of how the empirical research is performed. As mentioned before, the purpose of this master’s dissertation is to analyze the impact of B Corp certification on economic variables, namely firm growth and profitability. Firm growth will be defined in three different ways: asset growth, turnover growth and employee growth. ROA is used as an indicator for a company’s profitability. Similar to Parker (2019), growth (profit) rates before and after certification are compared to determine if there is a significant difference between them. Companies certified in year 𝑡 are assigned to the treatment group, whereas companies certified in 𝑡 + 1 belong to the control group. As mentioned earlier, 𝑡 = 2016. Thus, the difference in growth (profit) rates for TG firms between 𝑡 − 1 and 𝑡 + 1 (this is 2015 and 2017), indicated by 𝐷𝑇𝐺 (𝐷𝑇𝐺 ), is compared with the difference in growth (profit) rates for CG firms over the same time span, 𝐷𝐶𝐺 (𝐷𝐶𝐺 ). Univariate and subsequently multivariate difference-in-difference g 𝑅0𝐴 statistics are performed to test the hypotheses. The statistical analysis of the panel data is carried out using EViews 9.
View Source
Method of Analysis. Systems as listed below shall be analyzed by simplified, approximate or comprehensive methods of analysis that are appropriate for the specific case. Formal computer stress analyses shall be performed on the following lines: • Lines to and from all rotating equipment greater than two inches nominal diameter. • All working fluid and brine lines above 6”. • All cooling water lines above 14”. All computer stress analysis input and output shall be provided to the Company.
View Source
Method of Analysis. Each concentrate sample should be dried in drying oven, in order to get the samples free from the water content. - Each sample is weighed and separated into magnetic and non magnetic fractions using Fran▇▇ ▇▇▇dynamic. - Each fraction is weighed to get the weight procentage either to the concentrate or the original sample (before panning). - Gold grains will be easily separated. - Each fraction is ready to describe under the binocular microscope, after separating using the heavy liquid. MINERALOGICAL ANALYSIS Each fraction mainly non magnetic minerals describe under the microscope by means of counting the total grains of identified minerals and multifid with their specific gravity to get the weight procentage to the concentrate and to the original sample. Thus, the weight of each fraction be easily counted. The result of mineralogical are closed. From the 19 Test.Pit consist of 12 Test.Pit with grade content of gold ranged 30.375 gr/ton to 261.400 gr/ton and 4 Test,Pit have grade range 0.288 gr/ton to 6.0990 gr/ton and 3 Test.Pit are barren or possibly trace. 17 MINERALOGICAL ANALYSIS OF PAN CONCENTRATE OF THE TEST PIT SAMPLES FROM THE SILOBAT PROSPECT AREA, SINGKAWANG, WEST KALIMANTAN PREPARED BY : KARDANA HARDJADINATA ems Test pit Depth Weight of weight of Pan Weight identified mineral (gr) Sample concentrate No m (kg) Weight of Weight of Magnetite Ilmenite Limonite Magnetic Non Mineral Magnetic (gr) mineral 1 2 3 4 5 6 7 8 9 1. SL. 01 0.0-10 5.0 0.4948 0.6682 0.4848 0.0234 0.0354 1.0-2.0 3.0 0.3970 0.5952 0.3970 0.0208 0.0315 2.0-3.0 1.7 0.3842 0.71169 0.3842 0.0773 0.0702 3.0-3.5 1.6 0.4296 0.5490 0.4296 0.0176 0.0269 2. SL. 02 0.0-10 2.0 0.3862 0.4736 0.3862 0.0587 0.0706 1.0-2.0 1.7 0.3843 0.4482 0.3862 0.0021 0.0157 2.0-3.0 1.3 0.4109 0.7261 0.4109 0.0378 0.2614 3.0-4.0 1.5 0.3367 0.6766 0.3367 0.0622 0.3112 4.0-4.5 1.5 0.4170 1.5626 0.4170 0.1594 0.6766 3. SL. 03 0.0-10 3.0 0.4650 1.5980 0.4650 0.1998 0.5993 1.0-2.0 1.8 0.4447 3.0720 0.4447 0.8942 1.9040 2.0-3.0 1.7 0.4500 1.8891 0.4500 0.1054 1.6155 3.0-4.0 2.0 0.4492 1.3845 0.4492 0.0982 1.1680 4. SL. 04 0.0-10 1.9 2.0889 0.1888 2.0889 0.0138 0.0276 1.0-2.0 1.7 2.1095 0.2279 2.1095 0.0080 0.0239 2.0-3.0 2.2 3.5243 0.1451 3.5243 0.0136 0.0044 3.0-4.0 2.2 7.8145 0.3360 7.8145 0.0276 0.0091 4.0-4.5 1.9 2.0886 1.3845 2.0886 0.0117 0.0011 5. SL. 05 0.0-10 2.1 0.1216 1.5572 0.1216 0.4858 0.2912 1.0-2.0 2.1 0.0776 0.4591 0.0773 0.0437 0.1377 greater than 2.0 2.1 0.0096 0.1508 0.0096 0.0042 0.0016 Weight ...
View Source

Related to Method of Analysis

  • Method of Billing Consultant may submit invoices to the City for approval on a progress basis, but no more often than two times a month. Said invoice shall be based on the total of all Consultant’s services which have been completed to City’s sole satisfaction. City shall pay Consultant’s invoice within forty-five (45) days from the date City receives said invoice. Each invoice shall describe in detail, the services performed, the date of performance, and the associated time for completion. Any additional services approved and performed pursuant to this Agreement shall be designated as “Additional Services” and shall identify the number of the authorized change order, where applicable, on all invoices.

  • Method of Computation To determine the Adviser’s liability with respect to the Excess Amount, each month the Fund Operating Expenses for the Fund shall be annualized as of the last day of the month. If the annualized Fund Operating Expenses for any month exceeds the Operating Expense Limit of the Fund, the Adviser shall first waive or reduce its investment advisory fee for such month by an amount sufficient to reduce the annualized Fund Operating Expenses to an amount no higher than the Operating Expense Limit. If the amount of the waived or reduced investment advisory fee for any such month is insufficient to pay the Excess Amount, the Adviser shall also remit to the Fund an amount that, together with the waived or reduced investment advisory fee, is sufficient to pay such Excess Amount.

  • Method of Measurement All linear and area measurements under this Agreement are measured on the horizontal plane, unless specified otherwise in an attached Schedule.

  • Method of Calculation All calculations under this Section 4 shall be made to the nearest one hundredth of a share.

  • Method of Accounting The Company will use the method of accounting previously determined by the Members for financial reporting and tax purposes.