Milling Operations Clause Samples

Milling Operations. The milling operations shall be scheduled to minimize the duration and placement of traffic on the milled surface. The milling operations shall not proceed more than 3 miles ahead of the paving operations. Under no circumstances shall the milled surface be left exposed to traffic for a period exceeding seven days. The Engineer may allow the Contractor to adjust the above limitations on milling production when necessary. The Contractor shall coordinate milling and paving operations to minimize the exposure of milled surfaces to traffic. The Contractor shall ensure that milled surfaces are overlaid in a timely manner to avoid damage to the pavement structure. Any damage to the pavement structure resulting from extended exposure of the milled surface to traffic shall be repaired as directed by the Engineer at the Contractor’s expense. The existing pavement shall be removed to the average depth shown on the plans, in a manner that will restore the pavement surface to a uniform cross-section and longitudinal profile. The longitudinal profile of the milled surface shall be established using a 30 foot (10 meter) mobile ski, mobile string line, or stationary string line. The cross-slope of the milled surface shall be established by a second sensing device or by an automatic cross-slope control mechanism. The Contractor will be responsible for providing all grades necessary to remove the material to the proper line, grade, cross section, superelevation, and transitions shown on the plans or as directed by the Engineer. The requirement for automatic grade or slope controls may be waived by the Engineer in locations warranted by the situation, including intersections and closely confined areas. The Engineer may adjust the average milling depth specified on the plans by ± 3/4” (± 20mm) during each milling pass at no additional payment to minimize delamination of the underlying pavement course or to otherwise provide a more stable surface. If delamination or exposure of concrete occurs when milling a HMA pavement course from an underlying Portland Cement Concrete (PCC) pavement, the Contractor shall cease milling operations and consult the Engineer to determine whether to reduce the milling depth or make other adjustments to the operation. Throughout the milling operation, protection shall be provided around existing catch basin inlets, manholes, utility valve boxes, and any similar structures. Any damage to such structures as a result of the milling operation is the C...
Milling Operations. Curb line cold milling shall consist of milling to the specified depth at curb apron or edge of pavement tapering to pavement surface a maximum of eighty-four (84) inches from curb apron. Same process shall apply for shoulder milling operations. Machine shall be equipped with grade control to monitor to referenced grade lines. Intersections - regular milling of pavement surfaces to the specified depth with a maximum cutting width of eighty-four
Milling Operations. Conduct milling operations so that any milled pavement is paved back by the end of each work day. A milled/grooved surface shall not be re-opened to traffic except in cases where inclement weather or mechanical failure prevents the paving back of the lane by the end of the work day. If milled areas are not paved back within the same work period due to inclement weather or mechanical failure, the Contractor is to furnish and install portable signs to warn drivers of the conditions. These are to include “Grooved Pavement” (W8-15) w/ Motorcycle Plaque mounted below, and “Uneven Lanes” (W8-11). These are to be dual indicated where lateral clearance can be obtained within the median areas. Install the “Grooved Pavement” (W8-15) w/ Motorcycle Plaque 1500 FT. in advance of the milled area. Install the “Uneven Lanes” (W8-11) 500 Ft. in advance of the milled area. Alternate these signs every ½ mile. Once mitigated, all portable signs are to be removed. Slope the pavement at the beginning and ending of the daily milling operation as directed by the Engineer. Sweep and remove all milled material from the roadway as soon as the daily milling operation is completed. Remove any existing pavement adjacent to the milled area that has been damaged and replace with patch material as directed by the Engineer.

Related to Milling Operations

  • Processing operations The personal data transferred will be subject to the following basic processing activities (please specify):

  • Ongoing Operations From the Effective Date through Closing:

  • Business Operations Company will provide all necessary equipment, personnel and other appurtenances necessary to conduct its operations. Company will conduct its business operations hereunder in a lawful, orderly and proper manner, considering the nature of such operation, so as not to unreasonably annoy, disturb, endanger or be offensive to others at or near the Premises or elsewhere on the Airport.

  • Interim Operations (a) The Company covenants and agrees as to itself and its Subsidiaries that, from and after the execution of this Agreement and prior to the Effective Time (unless Parent shall otherwise approve in writing, which approval shall not be unreasonably withheld, conditioned or delayed, and except as (1) required by applicable Law, (2) expressly required by this Agreement or (3) otherwise expressly disclosed in Section 6.1(a) of the Company Disclosure Letter), the Company shall use its reasonable best efforts to conduct its business and the business of its Subsidiaries in the ordinary course of business consistent with past practice and each of the Company and its Subsidiaries shall, subject to compliance with the specific matters set forth below, use reasonable best efforts to preserve its business organization intact and maintain the existing relations and goodwill with Governmental Entities, customers, suppliers, distributors, licensors, creditors, lessors, employees and business associates and others having material business dealings with it and keep available the services of the Company and its Subsidiaries’ present employees and agents. Without limiting the generality of, and in furtherance of, the foregoing, the Company covenants and agrees as to itself and its Subsidiaries that, from and after the date of this Agreement and prior to the Effective Time, except (A) as required by applicable Law, (B) as Parent may approve in writing (such approval not to be unreasonably withheld, conditioned or delayed), (C) as expressly disclosed in Section 6.1(a) of the Company Disclosure Letter or (D) as expressly provided for in this Agreement, the Company shall not and will not permit any of its Subsidiaries to: (i) (A) amend its articles of incorporation or code of regulations (or comparable governing documents) (other than immaterial amendments to the governing documents of any wholly owned Subsidiary of the Company that would not prevent, materially delay or materially impair the Merger or the other transactions contemplated by this Agreement), (B) split, combine, subdivide or reclassify its outstanding shares of capital stock (except for any such transaction by a wholly owned Subsidiary of the Company which remains a wholly owned Subsidiary after consummation of such transaction), (C) declare, set aside or pay any dividend or distribution payable in cash, stock or property (or any combination thereof) in respect of any shares of its capital stock (except for (1) any dividends or distributions paid by a direct or indirect wholly owned Subsidiary of the Company to another direct or indirect wholly owned Subsidiary of the Company or to the Company or (2) other than normal quarterly cash dividends on the Company’s Shares as described in Section 6.1(a)(i)(C) of the Company Disclosure Letter), (D) enter into any agreement with respect to the voting of its capital stock or (E) purchase, repurchase, redeem or otherwise acquire any shares of its capital stock or any securities convertible or exchangeable into or exercisable for any shares of its capital stock (other than (1) pursuant to the cashless exercise of Company Options or the forfeiture of, or withholding of Taxes with respect to, Company Options, Company Restricted Stock Units or Company Performance Stock Units in connection with any Taxable event related to such awards, in each case in accordance with past practice and with the terms of the applicable Company Stock Plan as in effect on the date of this Agreement (or as modified after the date of this Agreement in accordance with the terms of this Agreement) or (2) purchases, repurchases, redemptions or other acquisitions of securities of any wholly owned Subsidiary of the Company by the Company or any other wholly owned Subsidiary of the Company); (ii) merge or consolidate with any other Person, or restructure, reorganize or completely or partially liquidate (other than mergers among, or the restructuring, reorganization or liquidation of any wholly owned Subsidiaries of the Company that would not (x) prevent, materially delay or materially impair the Merger or the other transactions contemplated by this Agreement or (y) reasonably be expected to result in any significant Tax liability); (iii) except as expressly contemplated by the terms of this Agreement, as expressly disclosed in Section 6.1(a)(iii) of the Company Disclosure Letter or as required by applicable Law or by the terms of any Company Plan listed on Section 5.1(h)(i) of the Company Disclosure Letter or any CBA, in either case as in effect on the date hereof (or as modified after the date of this Agreement in accordance with the terms of this Agreement): (A) increase the compensation or benefits payable to any director or named executive officers as identified in the Company’s proxy statement for the 2017 annual meeting of stockholders (collectively, the “Senior Executives”) of the Company, increase the compensation or benefits payable to any employee or individual consultant of the Company or any of its Subsidiaries, or make any loans to, any director, officer, employee or individual consultant of the Company or any of its Subsidiaries; (B) grant any new equity-based awards, or amend or modify the terms or accelerate the vesting of any such outstanding awards (except for any acceleration of any Company Option, Company Performance Stock Unit and Company Restricted Stock Unit in connection with the cessation of any Person’s employment with the Company or any of its Subsidiaries (other than any Senior Executive) to the extent that such acceleration is consistent with past practice), under any Company Plan; (C) amend any severance plan or agreement as in effect on the date hereof or waive or release any restrictive covenants thereunder; (D) make any change to any Company Pension Plan or any Company Plan that is an “employee welfare benefit plan” (within the meaning of Section 3(1) of ERISA) that would materially increase the costs to the Company or any of its Subsidiaries in respect of such Company Plan; (E) establish, adopt, or enter into any new arrangement that would be a Company Plan if in effect on the date hereof, other than individual separation and release agreements entered into in connection with ordinary-course terminations on terms consistent with the severance arrangements listed on Section 5.1(h)(i) of the Company Disclosure Schedule; (F) accelerate the payment of non-equity related compensation or benefits to any director, officer, employee, consultant or individual service provider, except as required (without discretion) pursuant to the terms of the Company Plans; (G) hire any new officer, employee, consultant or individual service provider (provided that the Company shall be permitted to (x) hire employees, consultants or other individual service providers with an aggregate annual base compensation and target incentive opportunity below $350,000 in the ordinary course of business consistent with past practice, or (y) engage individual or entity service providers with an aggregate annual base compensation and target incentive opportunity below $350,000 in the ordinary course of business consistent with past practice to fill positions that are open as of the date hereof or that become open following the date hereof to the extent reasonably necessary as determined by the Company in its sole discretion to maintain the Company’s core business); or (H) terminate any employee or officer of the Company or any of its Subsidiaries at level B7 or higher other than for cause (as determined in the ordinary course of business consistent with past practice); (iv) incur or guarantee any Indebtedness or issue any warrants or other rights to acquire any Indebtedness, except (A) in the ordinary course of business consistent with past practice, borrowings under the Company’s revolving credit facility as in effect as of the date hereof, (B) inter-company Indebtedness among the Company and its wholly owned Subsidiaries, (C) commercial paper issued in the ordinary course of business and (D) (i) to the extent not drawn upon and payments are not triggered thereby, letters of credit, bank guarantees, security or performance bonds or similar credit support instruments and (ii) overdraft facilities or cash management programs, in the case of each of clauses (i) and (ii), issued, made or entered into in the ordinary course of business; (v) make or commit to any capital expenditures other than (A) in connection with the repair or replacement of facilities, properties or assets destroyed or damaged due to casualty or accident or (B) in the ordinary course of business consistent with past practice and which do not exceed during either the 2017 fiscal year or the 2018 fiscal year one hundred and five percent (105%) of the amounts reflected in the Company’s capital expenditure budget for 2017, a copy of which was previously provided to Parent; (vi) transfer, lease, license, sell, assign, let lapse, abandon, cancel, mortgage, pledge, place a Lien (other than a Permitted Lien) upon or otherwise dispose of any Intellectual Property; provided that this clause (vi) shall not restrict (A) any of the foregoing that occur in the ordinary course of business or, to the extent applicable, among the Company and its Subsidiaries, (B) the granting of any licenses of Intellectual Property in the ordinary course consistent with past practice or (C) transfers, leases, sales, assignments, lapses, abandonments, cancellations, mortgages, pledges, Liens, or other dispositions of Intellectual Property (other than licenses) with a fair market value less than $10,000,000 in the aggregate for all such actions; (vii) other than in the ordinary course of business consistent with past practice, transfer, lease, license, sell, assign, let lapse, abandon, cancel, mortgage, pledge, place a Lien upon or otherwise dispose of any properties or assets (including capital stock of any of its Subsidiaries but not including any Intellectual Property, which is governed by Section 6.1(a)(vi) with a fair market value in excess of $5,000,000 individually or $12,500,000 in the aggregate (other than transactions among the Company and its wholly owned Subsidiaries); (viii) issue, deliver, sell, grant, transfer, or encumber, or authorize the issuance, delivery, sale, grant, transfer or encumbrance of, any shares of its capital stock or any securities convertible or exchangeable into or exercisable for, or any options, warrants or other rights to acquire, any such shares, except (A) for any Shares issued pursuant to Company Options, Company Restricted Stock Units and Company Performance Stock Units outstanding on the date of this Agreement in accordance with the existing terms of such awards and the Company Stock Plans, or (B) by wholly owned Subsidiaries to the Company or to any other wholly owned Subsidiary of the Company; (ix) spend or commit to spend in excess of $5,000,000 individually or $12,500,000 in the aggregate to acquire any business or businesses or to acquire assets or other property, whether by merger, consolidation, purchase of property or assets or otherwise (valuing any non-cash consideration at its fair market value as of the date of the agreement for such acquisition); provided that neither the Company nor any of its Subsidiaries shall make any acquisition that would, or would reasonably be likely to, prevent, delay or impair the Company’s ability to consummate the transactions contemplated by this Agreement; provided, further that nothing in this Section 6.1(a)(ix) shall restrict the ability of the Company to invest additional funds in any existing asset of the Company to offset any dilution in the Company’s existing interest in such asset; (x) make any material change with respect to its financial accounting policies or procedures, except as required by changes in GAAP (or any interpretation thereof) or by applicable Law; (xi) except as required by applicable Law, (A) make, change or revoke any material Tax election or take any material position on any material Tax Return filed on or after the date of this Agreement, in each case that is inconsistent with elections made or positions taken in preparing or filing similar Tax Returns in prior periods, except in each case as a result of, or in response to, any change in U.S. federal Tax Laws or regulations or administrative guidance promulgated or issued thereunder, (B) change any Tax accounting period or any material method of Tax accounting, (C) amend any material Tax Return, (D) settle or resolve any material Tax liability or any Tax audit or controversy with respect to a material amount of Taxes, (E) surrender any right to claim a material refund of Taxes, (F) consent to any extension or waiver of the limitation period applicable to any material Tax claim or assessment relating to the Company or any of its Subsidiaries, other than any extension pursuant to an extension of time to file any Tax Return or (G) enter into any closing agreement or similar agreement with any Tax authority in respect of Taxes; (xii) (A) enter into any new line of business other than any line of business that is reasonably ancillary to and a reasonably foreseeable extension of any line of business as of the date of this Agreement or (B) conduct a line of business of the Company or any of its Subsidiaries in any geographic area where it has never previously conducted business prior to the date of this Agreement; (xiii) make any loans, advances or capital contributions to, or investments in, any Person (other than loans, advances or capital contributions to the Company or any direct or indirect wholly owned Subsidiary of the Company); (xiv) (A) amend or modify in any material respect or terminate (excluding terminations upon expiration of the term thereof in accordance with the terms thereof) any Material Contract or waive, release or assign any material rights, claims or benefits under any Material Contract, other than any amendment, modification, termination, waiver, release or assignment (x) as required by Law, (y) pursuant to “most favored nation” offers made prior to the date of this Agreement or (z) in the ordinary course of business; provided that in no event shall the Company or its Subsidiaries amend or modify a Contract in which the packaging or rate terms would materially impact meeting the Company’s business plan, (B) enter into any Contract that would have been a Material Contract had it been entered into prior to the date of this Agreement unless it is on terms substantially consistent with, or on terms more favorable to the Company and/or its Subsidiaries (and to Parent and its Subsidiaries following the Closing) than a contract it is replacing; provided that in no event shall the Company or its Subsidiaries enter into a Contract in which the packaging or rate terms would materially impact meeting the Company’s business plan or (C) without restricting any action that is permissible in accordance with clauses (A) or (B) hereof, make any concession, or offer to make any concession, under any Material Contract except for (x) annual “most favored nation” offers made in the ordinary course of business consistent with past practice in connection with new issues arising after March 2017 or (y) mutual “clean slate” releases with distributors; provided that the foregoing shall not prohibit or restrict the ability of the Company or its Subsidiaries to take any action described in this Section 6.1(a)(xiv) in the ordinary course of business with respect to Material Contracts between the Company and/or one or more of its wholly owned Subsidiaries; provided, further that for the avoidance of doubt, this Section 6.1(a)(xiv) shall not prohibit or restrict any Company Plans; (xv) settle any action, suit, case, litigation, claim, hearing, arbitration, investigation or other proceedings before or threatened to be brought before a Governmental Entity, or pay, discharge, settle or waive any material liability, other than settlements (A) if the amount of any such settlement is not in excess of $500,000 individually or $2,000,000 in the aggregate; provided that such settlements are solely for money damages (and confidentiality and other similar customary provisions that would not reasonably be expected to place any material restrictions on the

  • Banking Operations Enter into any new material line of business; change its material lending, investment, underwriting, risk and asset liability management and other material banking and operating policies, except as required by applicable law, regulation or policies imposed by any Governmental Authority; or file any application or make any contract with respect to branching or site location or branching or site relocation.