Minrate Sample Clauses

The Minrate clause establishes a minimum interest rate that must be applied to a financial agreement, regardless of fluctuations in benchmark rates or other variables. In practice, this means that even if the reference rate falls below the specified minimum, the lender will still receive at least the minimum rate set by the clause. This provision protects the lender from earning less than a certain threshold, ensuring a predictable minimum return and mitigating the risk of extremely low interest environments.
Minrate. Fraction of the total time that the inventory level of an arbitrary part is above or equal to the minimum-level. With minrate the aggregate minrate is meant. The KPIs is measured in process INV. Total number of parts which are repaired are counted. The number of parts had a higher priority and the remaining number of parts are counted. In process E, it is checked whether the part had a higher priority or not. Percentage of parts which are repaired within their due-date (only in case of Lead- time). In process E, when the part is repaired and transported it is checked whether its due-date is elapsed or not.
View SourceView Similar (2)
Minrate. The minrate is the fraction of the time the inventory position is equal or above the minimum level, see Formulas H.9 and H.10. α(S, K) = mi · α (S , K ) (H.9)  SiΣ−Ki P (Xi = x) if Si − Ki > 0, (H.10) αi Si, Ki  P (Xi = 0) if Si 0 if − Ki = 0, 0 Si − Ki < where α(S, K) is the aggregate minrate for a given turn-around stock vector and a minimum vector. αi(Si, Ki) is the minrate for SKU i, with a given turn-around stock, Si and a minimum level Ki. The exact value of the minrate is equal to 0.8346. In Figure H.7 it can be seen that the two values do not differ significantly. Figure H.7: Comparison of exact minrate with minrate of simulation for Min-max model, using of a t-test (α = 0.95)
View SourceView Similar (2)
Minrate. In Figure 7.6a, the minrate and the percentage of parts which are repaired within the lead- time is displayed. The minrate and the percentage of parts which are repaired within the lead-time, both measures the ability of the repair shop, to adhere to the interface agreements made. In the Lead-time To-Be situation, the repair shop is best able to adhere to the agreement to repair parts within the lead-time, hereafter the Min-max To-Be situation and last the Min-max As-Is situation; respectively 92%, 90% and 82%. This performance can be explained by the fact that in the Lead-time model a relatively long lead-time is taken. In the Min-max To-Be situation the turn-around stock and minimum levels are optimized. In this case the minimum levels are well-chosen and therefore it is easier to maintain the inventory level above or equal to the minimum levels. Minrate/ Within due-date 0,100 0,050 Min−Max To−Be Lead−Time To−Be 0,000 0,250 0,200 0,150 Min−Max As−Is Ratio Ratio
View SourceView Similar (2)

Related to Minrate

  • CFR 200 328. Failure to submit such required Performance Reports may cause a delay or suspension of funding. 30 ILCS 705/1 et seq.

  • SBC-12STATE 47.1.1 The terms contained in this Agreement and any Appendices, Attachments, Exhibits, Schedules, and Addenda constitute the entire agreement between the Parties with respect to the subject matter hereof, superseding all prior understandings, proposals and other communications, oral or written between the Parties during the negotiations of this Agreement and through the execution and/or Effective Date of this Agreement. This Agreement shall not operate as or constitute a novation of any agreement or contract between the Parties that predates the execution and/or Effective Date of this Agreement.

  • Offshoring 9.1 The Department’s Data must not be processed outside the United Kingdom without the prior written consent of DWP and must at all times comply with the Data Protection ▇▇▇ ▇▇▇▇.

  • Subtotal Add Bond and Insurance, not to exceed percent ( %) of Item (g)

  • meminta nasihat daripada Pihak ▇▇▇▇▇▇ dalam semua perkara berkenaan dengan jualan lelongan, termasuk Syarat-syarat Jualan (iii) membuat carian Hakmilik ▇▇▇▇▇ ▇▇▇▇▇▇ rasmi di Pejabat Tanah ▇▇▇/atau ▇▇▇▇-▇▇▇▇ Pihak-pihak Berkuasa yang berkenaan ▇▇▇ (iv) membuat pertanyaan dengan Pihak Berkuasa yang berkenaan samada jualan ini terbuka kepada semua bangsa atau kaum Bumiputra Warganegara Malaysia sahaja atau melayu sahaja ▇▇▇ juga mengenai persetujuan untuk jualan ini sebelum jualan lelong.Penawar yang berjaya ("Pembeli") dikehendaki dengan segera memohon ▇▇▇ mendapatkan kebenaran pindahmilik (jika ada) daripada Pihak Pemaju ▇▇▇/atau Pihak Tuanpunya ▇▇▇/atau Pihak Berkuasa Negeri atau badan-badan berkenaan (v) memeriksa ▇▇▇ memastikan samada jualan ini dikenakan cukai. HAKMILIK : Hakmilik strata bagi hartanah ini masih belum dikeluarkan HAKMILIK INDUK / NO. LOT : Pajakan Negeri 35263, Lot No.29096 MUKIM/DAERAH/NEGERI : Setapak / Kuala Lumpur / Wilayah Persekutuan Kuala Lumpur PEGANGAN : Pajakan selama 82-tahun berakhir pada 08/08/2085 KELUASAN LANTAI : 81.104 meter persegi ( 873 kaki persegi ) PEMAJU/PENJUAL : Mega Planner Jaya Sdn Bhd (326287-W)(Dalam Likuidasi) TUANPUNYA : Datuk Bandar Kuala Lumpur PEMBELI : ▇▇▇▇▇▇▇▇ Bin ▇▇▇▇▇ @ ▇▇▇▇ BEBANAN : Diserahhak kepada RHB Bank Berhad [196501000373 (6171-M)] Hartanah tersebut terletak di tingkat 9 pada bangunan apartment 14-tingkat terletak di Melati Impian Apartment, Setapak Fasa 1, Kuala Lumpur. Hartanah tersebut adalah sebuah unit apartment 3 ▇▇▇▇▇ dikenali sebaga ▇▇▇▇▇ Pemaju No. 9, Tingkat No.9, Pembangunan dikenali sebagai Melati Impian Apartment Setapak Fasa 1, Kuala Lumpur ▇▇▇ mempunyai alamat surat-▇▇▇▇▇▇▇▇ ▇▇ ▇▇▇▇ ▇▇. ▇-▇, ▇▇▇▇▇▇ Impian Apartment, ▇▇▇▇▇ ▇/▇▇▇, ▇▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇. Harta ini dijual “keadaan seperti mana sediada” dengan harga rizab sebanyak RM 300,000.00 (RINGGIT MALAYSIA: TIGA RATUS RIBU SAHAJA) ▇▇▇ tertakluk kepada syarat-syarat Jualan ▇▇▇ melalui penyerahan hakkan dari Pemegang Serahak, tertakluk kepada kelulusan di perolehi oleh pihak Pembeli daripada pihak berkuasa, jika ada, termasuk semua terma, syarat ▇▇▇ perjanjian yang dikenakan ▇▇▇ mungkin dikenakan oleh Pihak Berkuasa yang berkenaan. Pembeli bertanggungjawab sepenuhnya untuk memperolehi ▇▇▇ mematuhi syarat-syarat berkenaan daripada Pihak Berkuasa yang berkenaan, jika ada ▇▇▇ semua ▇▇▇ ▇▇▇ perbelanjaan ditanggung ▇▇▇ dibayar oleh ▇▇▇▇▇ ▇▇▇▇▇▇▇.Pembeli atas talian (online) juga tertakluk kepada terma-terma ▇▇▇ syarat-syarat terkandung dalam ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇ Pembeli yang berminat adalah dikehendaki mendeposit kepada Pelelong 10% daripada harga rizab dalam bentuk Bank Draf atau Cashier’s Order di atas nama RHB Bank Berhad sebelum lelongan awam ▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇ hendaklah dibayar dalam tempoh sembilan puluh (90) hari dari tarikh lelongan kepada RHB Bank Berhad melalui Bank Draf / ▇▇▇▇▇▇. Butir-butir pembayaran melalui ▇▇▇▇▇▇, ▇▇▇▇ berhubung dengan Tetuan Zahrin Emrad & Sujaihah. Untuk maklumat lanjut, ▇▇▇▇ berhubung dengan TETUAN ZAHRIN EMRAD & SUJIAHAH, yang beralamat di Suite 10.3, 10th Floor, ▇▇▇ ▇▇▇▇ Building, ▇▇.▇▇, ▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇. Tel: ▇▇-▇▇▇▇ ▇▇▇▇ / Fax: ▇▇-▇▇▇▇ ▇▇▇▇. [ Ruj: ZES/ZHR/RHB-FC/16250-17/0614-pae ], peguamcara bagi pihak pemegang ▇▇▇▇▇ ▇▇▇ atau pelelong yang tersebut dibawah.