Non-Standard System. 4.6.1 Subject to Customer's compliance with all other terms and conditions of this Agreement, TSG agrees to allow Customer to connect or use Non-Standard System with the System without TSG's prior written consent, except to the extent that such Non-Standard System consists or communications data lines, emulator boards, gateways, routers, ticket printers or other devices connecting directly to the System or SABRE System ("Reserved Equipment"). TSG consent for Reserved Equipment shall be conditioned upon TSG certification and approval prior to its use with the System. Such consent may be withheld in order to preserve the integrity of the SABRE System and the System. 4.6.2 Customer shall represent and warrant to TSG that the Non-Standard System and its connection to the System conforms in all respects to TSG's Non- Standard System standards and specifications, a copy of which Customer may request from TSG, and will not be altered or modified without prior notice to TSG. 4.6.3 Customer shall remove all Non-Standard System placed on or within the Standard Equipment prior to TSG's removing such Standard Equipment from Customer's Site. TSG disclaims, and Customer hereby waives and indemnifies, any responsibility or liability on the part of TSG, under any theory whatsoever, for any Non-Standard System that Customer has failed to remove from the Standard Equipment prior to TSG's removing such Standard Equipment from Customer's site. 4.6.4 Customer shall not use Non-Standard System in conjunction with the System for any function not specifically outlined in this Agreement and any use or attempted use for any other function shall constitute an Event of Default under Article 14.1.2. 4.6.5 Customer shall also ensure that TSG has access to Customer's Site on request for conducting on-site inspections, testing or to oversee installation of the Non-Standard System. Customer is responsible for ensuring that any Standard Equipment at Customer's Site is connected to the System for the purposes of performing testing and diagnostics on such Standard Equipment by TSG's designated agent. If TSG reasonably determines that the Non-Standard System is causing, or contributing to, a problem with the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System, then TSG has the right to immediately restrict access to the SABRE System upon notice to Customer as provided for in this Agreement and TSG shall have no liability to Customer for such restriction of access. 4.6.6 Customer agrees that its continued right to maintain the connection between the Non-Standard System and the System and/or the SABRE System and to use the Non-Standard System in connection with the Standard Equipment shall be dependent upon Customer's full cooperation with requests by TSG to repair, alter, modify, or where necessary, de-install the Non-Standard System if TSG reasonably determines that the Non-Standard System, or a component thereof, is impairing the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System. 4.6.7 Customer shall pay TSG's then prevailing rate for all employee resources expended by TSG for, but not limited to, TSG's monitoring of the installation of the Non-Standard System and/or expended in connection with on- site, inspection and/or testing of the Non-Standard System after installation, service calls and any travel and incidental expenses incurred by TSG's personnel or vendors for the conduct of such monitoring, inspecting, testing or service calls; provided, however, that after the initial installation of the Non- Standard System, TSG will make such on-site inspections or test only where it reasonably believes that the Non-Standard System is impairing the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System. 4.6.8 Customer agrees that TSG has first and complete access to the SABRE Component. If, as a result of Customer's use of Non-Standard System, an upgrade of the SABRE Component is required, Customer shall comply with the applicable provisions of this Agreement. 4.6.9 TSG reserves the right to modify the SABRE System or the System, even if such modification requires changes in Customer's Non-Standard System. TSG will make reasonable efforts to notify Customer in advance of such changes. Any expenses incurred in modifying Customer's Non-Standard System to conform to the SABRE System or System modifications shall be the sole responsibility of Customer.
Appears in 1 contract
Non-Standard System. 4.6.1 Subject to Customer's compliance with all other terms and conditions of this Agreement, TSG agrees to allow Customer to connect or use Non-Standard System with the System without TSG's prior written consent, except to the extent that such Non-Standard System consists or of communications data lines, emulator boards, gateways, routers, ticket printers or other devices connecting directly to the System or SABRE System ("Reserved Equipment"). TSG consent for Reserved Equipment shall be conditioned upon TSG certification and approval prior to its use with the System. Such consent may be withheld in order to preserve the integrity of the SABRE System and the System.
4.6.2 Customer shall represent and warrant to TSG that the Non-Standard System and its connection to the System conforms in all respects to TSG's Non- Non-Standard System standards and specifications, a copy of which Customer may request from TSG, and will not be altered or modified without prior notice to TSG.
4.6.3 Customer shall remove all Non-Standard System placed on or within the Standard Equipment prior to TSG's removing such Standard Equipment from Customer's Site. TSG disclaims, and Customer hereby waives and indemnifies, any responsibility or liability on the part of TSG, under any theory whatsoever, for any Non-Standard System that Customer has failed to remove from the Standard Equipment prior to TSG's removing such Standard Equipment from Customer's siteSite.
4.6.4 Customer shall not use Non-Standard System in conjunction with the System for any function not specifically outlined in this Agreement and any use or attempted use for any other function shall constitute an Event of Default under Article 14.1.2.
4.6.5 Customer shall also ensure that TSG has access to Customer's Site on request for conducting on-site inspections, testing or to oversee installation of the Non-Standard System. Customer is responsible for ensuring that any Standard Equipment at Customer's Site is connected to the System for the purposes of performing testing and diagnostics on such Standard Equipment by TSG's designated agent. If TSG and Customer reasonably determines determine that the Non-Standard System is causing, or contributing to, a problem with the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System, then TSG has the right to immediately restrict access to the SABRE System upon notice to Customer as provided for in this Agreement and TSG shall have no liability to Customer for such restriction of access.
4.6.6 Customer agrees that its continued right to maintain the connection between the Non-Standard System and the System and/or the SABRE System and to use the Non-Standard System in 5 connection with the Standard Equipment shall be dependent upon Customer's full cooperation with requests by TSG to repair, alter, modify, or where necessary, de-install the Non-Standard System if TSG and Customer reasonably determines determine that the Non-Standard System, or a component thereof, is impairing the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System.
4.6.7 Customer shall pay TSG's then prevailing TSG a mutually agreed upon rate for all employee resources expended by TSG for, but not limited to, TSG's monitoring of the installation of the Non-Standard System and/or expended in connection with on- site, on-site inspection and/or testing of the Non-Standard System after installation, service calls and any travel and incidental expenses incurred by TSG's personnel or vendors for the conduct of such monitoring, inspecting, testing or service calls; provided, however, that after the initial installation of the Non- Non-Standard System, TSG will make such on-site inspections or test only where it TSG and customer reasonably believes believe that the Non-Standard System is impairing the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System.
4.6.8 Customer agrees that TSG has first and complete access to the SABRE Component. If, as a result of Customer's use of Non-Standard System, an upgrade of the SABRE Component is required, Customer shall comply with the applicable provisions of this Agreement.
4.6.9 TSG reserves the right to modify the SABRE System or the System, even if such modification requires changes in Customer's Non-Standard System. TSG will make reasonable efforts to notify Customer in advance of such changes. Any expenses incurred in modifying Customer's Non-Standard System to conform to the SABRE System or System modifications shall be the sole responsibility of Customer.
Appears in 1 contract
Non-Standard System. 4.6.1 Subject to Customer's compliance with all other terms and conditions of this Agreement, TSG agrees to allow Customer to connect or use Non-Standard System with the System without TSG's prior written consent, except to the extent that such Non-Standard System consists or communications data lines, emulator boards, gateways, routers, ticket printers or other devices connecting directly to the System or SABRE System ("Reserved Equipment"). TSG consent for Reserved Equipment shall be conditioned upon TSG certification and approval prior to its use with the System. Such consent may be withheld in order to preserve the integrity of the SABRE System and the System.
4.6.2 Customer shall represent and warrant to TSG that the Non-Standard System and its connection to the System conforms in all respects to TSG's Non- Standard System standards and specifications, a copy of which Customer may request from TSG, and will not be altered or modified without prior notice to TSG.
4.6.3 Customer shall remove all Non-Standard System placed on or within the Standard Equipment prior to TSG's removing such Standard Equipment from Customer's Site. TSG disclaims, and Customer hereby waives and indemnifies, any responsibility or liability on the part of TSG, under any theory whatsoever, for any Non-Standard System that Customer has failed to remove from the Standard Equipment prior to TSG's removing such Standard Equipment from Customer's site.
4.6.4 Customer shall not use Non-Standard System in conjunction with the System for any function not specifically outlined in this Agreement and any use or attempted use for any other function shall constitute an Event of Default under Article 14.1.20.
4.6.5 Customer shall also ensure that TSG has access to Customer's Site on request for conducting on-site inspections, testing or to oversee installation of the Non-Standard System. Customer is responsible for ensuring that any Standard Equipment at Customer's Site is connected to the System for the purposes of performing testing and diagnostics on such Standard Equipment by TSG's designated agent. If TSG reasonably determines that the Non-Standard System is causing, or contributing to, a problem with the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System, then TSG has the right to immediately restrict access to the SABRE System upon notice to Customer as provided for in this Agreement and TSG shall have no liability to Customer for such restriction of access.
4.6.6 Customer agrees that its continued right to maintain the connection between the Non-Standard System and the System and/or the SABRE System and to use the Non-Standard System in connection with the Standard Equipment shall be dependent upon Customer's full cooperation with requests by TSG to repair, alter, modify, or where necessary, de-install the Non-Standard System if TSG reasonably determines that the Non-Standard System, or a component thereof, is impairing the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System.
4.6.7 Customer shall pay TSG's then prevailing rate for all employee resources expended by TSG for, but not limited to, TSG's monitoring of the installation of the Non-Standard System and/or expended in connection with on- site, inspection and/or testing of the Non-Standard System after installation, service calls and any travel and incidental expenses incurred by TSG's personnel or vendors for the conduct of such monitoring, inspecting, testing or service calls; provided, however, that after the initial installation of the Non- Standard System, TSG will make such on-site inspections or test only where it reasonably believes that the Non-Standard System is impairing the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System.
4.6.8 Customer agrees that TSG has first and complete access to the SABRE Component. If, as a result of Customer's use of Non-Standard System, an upgrade of the SABRE Component is required, Customer shall comply with the applicable provisions of this Agreement.
4.6.9 TSG reserves the right to modify the SABRE System or the System, even if such modification requires changes in Customer's Non-Standard System. TSG will make reasonable efforts to notify Customer in advance of such changes. Any expenses incurred in modifying Customer's Non-Standard System to conform to the SABRE System or System modifications shall be the sole responsibility of Customer.
Appears in 1 contract
Non-Standard System. 4.6.1 Subject to Customer's Customers compliance with all other terms and conditions of this Agreement, TSG agrees to allow Customer to connect or use Non-Standard System with the System without TSG's prior written consent, consent except to the extent that such Non-Standard System consists or of communications data lines, emulator boards, gateways, routers, ticket printers or other devices connecting directly to the System or SABRE System ("Reserved Equipment"). TSG consent for Reserved Equipment shall be conditioned upon TSG certification and approval prior to its use with the System. Such consent may be withheld in order to preserve the integrity of the SABRE System and the System.
4.6.2 Customer shall represent and warrant to TSG that the Non-Standard System and its connection to the System conforms in all respects to TSG's Non- Non-Standard System standards and specifications, a copy of which Customer may request from TSG, and will not be altered or modified without prior notice to TSG.
4.6.3 Customer shall remove all Non-Standard System placed on or within the Standard Equipment prior to TSG's removing such Standard Equipment from Customer's Customers Site. TSG disclaims, and Customer hereby waives and indemnifiesindemnities, any responsibility or liability on the part of TSG, under any theory whatsoever, for any Non-Standard System that Customer has failed to remove from the Standard Equipment prior to TSG's removing such Standard Equipment from Customer's siteCustomers Site.
4.6.4 Customer shall not use Non-Standard System in conjunction with the System for any function not specifically outlined in this Agreement and any use or attempted use for any other function shall constitute an Event of Default under Article 14.1.2.
4.6.5 Customer shall also ensure that TSG has access to Customer's Site on request for conducting on-site inspections, testing or to oversee installation of the Non-Standard System. Customer is responsible for ensuring that any Standard Equipment at Customer's Site is connected to the System for the purposes of performing testing and diagnostics on such Standard Equipment by TSG's designated agent. If TSG reasonably determines that the Non-Standard System is causing, or contributing to, a problem with the System, the SABRE System or another SABRE Subscriber's Subscribers access to or operation of the SABRE System, then TSG has the right to immediately restrict access to the SABRE System upon notice to Customer as provided for in this Agreement and TSG shall have no liability to Customer for such restriction of access.
4.6.6 Customer agrees that its continued right to maintain the connection between the Non-Standard System and the System and/or the SABRE System and to use the Non-Standard System in connection with the Standard Equipment shall be dependent upon Customer's full cooperation with requests by TSG to repair, alter, modify, or where necessary, de-install the Non-Standard System if TSG reasonably determines that the Non-Standard System, or a component thereof, is impairing the System, the SABRE System or another SABRE Subscriber's access to or operation of the SABRE System.
4.6.7 Customer shall pay TSG's then prevailing rate for all employee resources expended by TSG for, but not limited to, TSG's monitoring of the installation of the Non-Standard System and/or expended in connection with on- site, on-site inspection and/or testing of the Non-Standard System after installation, service calls and any travel and incidental expenses incurred by TSG's personnel or vendors for the conduct of such monitoring, inspecting, testing or service calls; provided, however, that after the initial installation Installation of the Non- Non-Standard System, TSG will make such on-site inspections or test only where it reasonably believes that the Non-Standard System is impairing the System, the SABRE System or another SABRE Subscriber's Subscribers access to or operation of the SABRE System.
4.6.8 Customer agrees that TSG has first and complete access to the SABRE Component. If, If as a result of Customer's use of Non-Standard System, an upgrade of the SABRE Component is required, Customer shall comply with the applicable provisions of this Agreement.
4.6.9 TSG reserves the right to modify the SABRE System or the System, even if such modification requires changes in Customer's Non-Standard System. TSG will make reasonable efforts to notify Customer in advance of such changes. Any expenses incurred in modifying Customer's Non-Standard System to conform to the SABRE System or System modifications shall be the sole responsibility of Customer.
Appears in 1 contract
Sources: Sabre Subscriber Agreement (800 Travel Systems Inc)
Non-Standard System. 4.6.1 Subject to Customer's compliance with all other terms and conditions of this Agreement, TSG Sabre agrees to allow Customer to connect or use Non-Standard System with the System without TSGSabre's prior written consent, except to the extent that such Non-Standard System consists or of communications data lines, emulator boards, gateways, routers, ticket printers or other devices connecting directly to the System or SABRE Sabre System ("Reserved Equipment"). TSG Sabre consent for Reserved Equipment shall be conditioned upon TSG Sabre certification and approval prior to its use with the System. Such consent may be withheld in order to preserve the integrity of the SABRE Sabre System and the System.
4.6.2 Customer shall represent and warrant to TSG Sabre that the Non-Standard System and its connection to the System conforms in all respects to TSGSabre's Non- Non-Standard System standards and specifications, a copy of which Customer may request from TSGSabre, and will not be altered or modified without prior notice to TSGSabre.
4.6.3 Customer shall remove all Non-Standard System placed on or within the Standard Equipment prior to TSGSabre's removing such Standard Equipment from Customer's Site. TSG Sabre disclaims, and Customer hereby waives and indemnifies, any responsibility or liability on the part of TSGSabre, under any theory whatsoever, for any Non-Standard System that Customer has failed to remove from the Standard Equipment prior to TSGSabre's removing such Standard Equipment from Customer's siteSite.
4.6.4 Customer shall not use Non-Standard System in conjunction with the System for any function not specifically outlined in this Agreement and any use or attempted use for any other function shall constitute an Event of Default under Article 14.1.2.
4.6.5 Customer shall also ensure that TSG Sabre has access to Customer's Site on request for conducting on-site inspections, testing or to oversee installation of the Non-Standard System. Customer is responsible for ensuring that any Standard Equipment at Customer's Site is connected to the System for the purposes of performing testing and diagnostics on such Standard Equipment by TSGSabre's designated agent. If TSG Sabre reasonably determines that the Non-Standard System is causing, or contributing to, a problem with the System, the SABRE Sabre System or another SABRE Sabre Subscriber's access to or operation of the SABRE Sabre System, then TSG Sabre has the right to immediately restrict access to the SABRE Sabre System upon notice to Customer as provided for in this Agreement and TSG Sabre shall have no liability to Customer for such restriction of access.
4.6.6 Customer agrees that its continued right to maintain the connection between the Non-Standard System and the System and/or the SABRE Sabre System and to use the Non-Standard System in connection with the Standard Equipment shall be dependent upon Customer's full cooperation with requests by TSG Sabre to repair, alter, modify, or where necessary, de-install the Non-Standard System if TSG Sabre reasonably determines that the Non-Standard System, or a component thereof, is impairing the System, the SABRE Sabre System or another SABRE Sabre Subscriber's access to or operation of the SABRE Sabre System.
4.6.7 Customer shall pay TSGSabre's then prevailing rate for all employee resources expended by TSG Sabre for, but not limited to, TSGSabre's monitoring of the installation of the Non-Standard System and/or expended in connection with on- site, on-site inspection and/or testing of the Non-Standard System after installation, service calls and any travel and incidental expenses incurred by TSGSabre's personnel or vendors for the conduct of such monitoring, inspecting, testing or service calls; provided, however, that after the initial installation of the Non- Non-Standard System, TSG Sabre will make such on-site inspections or test only where it reasonably believes that the Non-Standard System is impairing the System, the SABRE Sabre System or another SABRE Sabre Subscriber's access to or operation of the SABRE Sabre System.
4.6.8 Customer agrees that TSG Sabre has first and complete access to the SABRE Sabre Component. If, as a result of Customer's use of Non-Standard System, an upgrade of the SABRE Sabre Component is required, Customer shall comply with the applicable provisions of this Agreement.
4.6.9 TSG Sabre reserves the right to modify the SABRE Sabre System or the System, even if such modification requires changes in Customer's Non-Standard System. TSG Sabre will make reasonable efforts to notify Customer in advance of such changes. Any expenses incurred in modifying Customer's Non-Standard System to conform to the SABRE Sabre System or System modifications shall be the sole responsibility of Customer.
Appears in 1 contract