Operator Interface Clause Samples

The Operator Interface clause defines the requirements and standards for the systems or platforms through which an operator interacts with equipment, software, or processes. It typically outlines specifications for usability, accessibility, and security, ensuring that the interface is intuitive and provides necessary information for effective operation. By establishing these guidelines, the clause helps prevent user errors, promotes operational efficiency, and ensures that operators can safely and reliably control the relevant systems.
Operator Interface. Web server shall reside on high-speed network with building controllers. Each standard browser connected to server shall be able to access all system information.
Operator Interface. The operator interface equipment shall be located in the Control Building and shall provide the operator access to the process utilizing CRT display terminals with functional sealed keyboards and one alarm printer, -------------------------------------------------------------------------------- EPC - Exhibit B -------------------- TENASKA GEORGIA GENERATION PROJECT Page 121 of 132 -------------------------------------------------------------------------------- one demand printer and one log printer. In the event of loss of electrical power the unit shall be capable of maintaining memory functions for a minimum of two (2) hours and shall provide fail-save outputs. The PCS shall provide the following minimum features. - The PCS Operator Interface consoles shall utilize Microsoft Windows NT version 4.0 (or higher) operating system. - Be conveniently programmable and capable of controlling from any of the CRT/keyboard operator interface terminals. A security system shall be provided to prevent unauthorized entries. - Provide graphically an overview of all setpoints, process variables and deviations from limits with dynamic updating.
Operator Interface. Multiple-character digital or graphic display with dynamic update of information and with keypad or touch-sensitive display located on front of control enclosure. In either imperial or metric units, display the following information: a. Date and time. b. Operating or alarm status. c. Operating hours. d. Outdoor-air temperature if required for chilled-water reset. e. Temperature and pressure of operating set points. f. Entering and leaving temperatures of chilled water. g. Refrigerant pressures in evaporator and condenser. h. Saturation temperature in evaporator and condenser. i. No cooling load condition. j. Elapsed time meter (compressor run status). k. Pump status. l. Antirecycling timer status. m. Percent of maximum motor amperage. n. Current-limit set point. o. Number of compressor starts. p. Operating power (kw).
Operator Interface. A. Local Interface. Extend new controls from the existing base building PC based workstation(s). All graphics based workstation(s) shall be able to access all information in the system.

Related to Operator Interface

  • Access Toll Connecting Trunk Group Architecture 8.2.1 If Reconex chooses to subtend a Verizon access Tandem, Reconex’s NPA/NXX must be assigned by Reconex to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center subtends as identified in the LERG. 8.2.2 Reconex shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from Reconex’s Customers. 8.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office Reconex utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the Tandem Verizon utilizes to provide Exchange Access in such LATA. 8.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow Reconex’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access tandem.

  • One-Way Interconnection Trunks 2.3.1 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Onvoy to Frontier, Onvoy, at Onvoy’s own expense, shall: 2.3.1.1 provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA; and/or 2.3.1.2 obtain transport for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA (a) from a third party, or, (b) if Frontier offers such transport pursuant to a Frontier access Tariff, from Frontier. 2.3.2 For each Tandem or End Office One-Way Interconnection Trunk group for delivery of traffic from Onvoy to Frontier with a utilization level of less than sixty percent (60%) for final trunk groups and eighty-five percent (85%) for high usage trunk groups, unless the Parties agree otherwise, Onvoy will promptly submit ASRs to disconnect a sufficient number of Interconnection Trunks to attain a utilization level of approximately sixty percent (60%) for all final trunk groups and eighty-five percent (85%) for all high usage trunk groups. In the event Onvoy fails to submit an ASR to disconnect One-Way Interconnection Trunks as required by this Section, Frontier may disconnect the excess Interconnection Trunks or bill (and Onvoy shall pay) for the excess Interconnection Trunks at the rates set forth in the Pricing Attachment. 2.3.3 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Frontier to Onvoy, Frontier, at Frontier’s own expense, shall provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA.

  • Two-Way Interconnection Trunks 2.4.1 Where the Parties have agreed to use Two Way Local Interconnection Trunks, prior to ordering any Two-Way Local Interconnection Trunks from Verizon, Teleconex shall meet with Verizon to conduct a joint planning meeting (“Joint Planning Meeting”). At that Joint Planning Meeting, each Party shall provide to the other Party originating CCS (Hundred Call Second) information, and the Parties shall mutually agree on the appropriate initial number of Two-Way End Office and Tandem Local Interconnection Trunks and the interface specifications at the Point of Interconnection (POI). 2.4.2 Two-Way Local Interconnection Trunks shall be from a Verizon End Office or Tandem to a mutually agreed upon POI. Where the Teleconex is collocated in a Verizon Wire Center, the POI shall be at the Verizon Wire Center. 2.4.3 On a semi-annual basis, Teleconex shall submit a good faith forecast to Verizon of the number of End Office and Tandem Two-Way Local Interconnection Trunks that Teleconex anticipates that Verizon will need to provide during the ensuing two (2) year period. Teleconex’s trunk forecasts shall conform to the Verizon CLEC trunk forecasting guidelines as in effect at that time. 2.4.4 The Parties shall meet (telephonically or in person) from time to time, as needed, to review data on End Office and Tandem Two-Way Local Interconnection Trunks to determine the need for new trunk groups and to plan any necessary changes in the number of Two-Way Local Interconnection Trunks. 2.4.5 Two-Way Local Interconnection Trunks shall have SS7 Common Channel Signaling. The Parties agree to utilize B8ZS and Extended Super Frame (ESF) DS1 facilities, where available.‌‌‌‌‌‌‌ 2.4.6 With respect to End Office Two-Way Local Interconnection Trunks, both Parties shall use an economic CCS equal to five (5). 2.4.7 Two-Way Local Interconnection Trunk groups that connect to a Verizon access Tandem shall be engineered using a design blocking objective of ▇▇▇▇-▇▇▇▇▇▇▇▇▇ B.005 during the average time consistent busy hour; Two-Way Local Interconnection Trunk groups that connect to a Verizon local Tandem shall be engineered using a design blocking objective of ▇▇▇▇ ▇▇▇▇▇▇▇▇▇ B.01 during the average time consistent busy hour. Verizon and Teleconex shall engineer Two-Way Local Interconnection Trunks using national standards. 2.4.8 Teleconex shall determine and order the number of Two-Way Local Interconnection Trunks that are required to meet the applicable design blocking objective for all traffic carried on each Two-Way Local Interconnection Trunk group. Teleconex shall order Two-Way Local Interconnection Trunks by submitting ASRs to Verizon setting forth the number of Two-Way Local Interconnection Trunks to be installed and the requested installation dates within Verizon’s effective standard intervals or negotiated intervals, as appropriate. Teleconex shall complete ASRs in accordance with Ordering and Billing Forum Guidelines as in effect from time to time. 2.4.9 Verizon may monitor Two-Way Local Interconnection Groups using service results for the applicable design-blocking objective. If Verizon observes blocking in excess of the applicable design objective on any final Two-Way Local Interconnection Trunk group and Teleconex has not notified Verizon that it has corrected such blocking, Verizon may submit to Teleconex a Trunk Group Service Request directing Teleconex to remedy the blocking. Upon receipt of a Trunk Group Service Request, Teleconex will complete an ASR to augment the Two-Way Local Interconnection Group with excessive blocking and submit the ASR to Verizon within five (5) Business Days. 2.4.10 Any Tandem Two-Way Local Interconnection Trunk group between the Teleconex’s POI and a Verizon Tandem will be limited to a maximum of 240 trunks unless otherwise agreed to by the Parties. In the event that any Tandem Two-Way Local Interconnection Trunk group exceeds the 240 trunk level at any time, Teleconex shall promptly submit an ASR to Verizon to establish new or additional End Office Trunk groups to insure that such Tandem Two-Way Local Interconnection Trunk group does not exceed the 240 trunk level. 2.4.11 Upon request, Teleconex will submit a written report to Verizon each month setting forth trunk utilization information and percentages. Teleconex will calculate utilization percentages by using a traffic data analyzation system specified by Verizon, industry standard study periods and a time consistent busy hour. 2.4.12 The Parties will review all Tandem Two-Way Local Interconnection Trunk groups that reach a utilization level of seventy percent (70%), or greater, to determine whether those groups should be augmented. Teleconex will promptly augment all Tandem Two-Way Local 2.4.13 The performance standard on final Two-Way Local Interconnection Trunks shall be that no such Local Interconnection Trunk group will exceed its design blocking objective (B.005 or B.01, as applicable) for three (3) consecutive calendar traffic study months. 2.4.14 Because Verizon will not be in control of the timing and sizing of the Two-Way Local Interconnection Trunks between its network and Teleconex’s network, Verizon’s performance on these Two-Way Local Interconnection Trunk groups shall not be subject to any performance measurements and remedies under this Agreement, and, except as otherwise required by Applicable Law, under any FCC or Commission approved carrier-to-carrier performance assurance guidelines or plan. 2.4.15 Upon three (3) months prior written notice and with the mutual agreement of the Parties, either Party may withdraw its traffic from a Two-Way Local Interconnection Trunk group and install One-Way Local Interconnection Trunks to the applicable POI. 2.4.16 Notwithstanding any other provision of this Agreement, Two-Way Local Interconnection Trunks shall only carry Local Traffic, IntraLATA Toll Traffic and Internet Traffic. 2.4.17 Teleconex will route its traffic to Verizon over the End Office and Tandem Two-Way Local Interconnection Trunks in accordance with SR-TAP192, including but not limited to those standards requiring that a call from Teleconex to a Verizon End Office will first be routed to the End Office Local Interconnection Trunk group between Teleconex and the Verizon End Office. 2.4.18 When the Parties implement Two-Way Local Interconnection Trunks, the Parties will work cooperatively to calculate a Proportionate Percentage of Use or “PPU” factor, based on the total number of minutes of Traffic that each Party originates over the Two-Way Local Interconnection Trunks. Teleconex will pay a percentage of Verizon’s monthly recurring charges for the facility on which the Two-Way Local Interconnection Trunks ride equal to Teleconex’s percentage of use of the facility as shown by the PPU. The PPU shall not be applied to calculate the charges for any portion of a facility that is on Teleconex’s side of Teleconex’s-IP, which charges shall be solely the financial responsibility of Teleconex. Non-recurring charges for the facility on which the Two-Way Interconnection Trunks ride shall be apportioned as follows: (a) for the portion of the Trunks on Verizon’s side of the Teleconex-IP, the non-recurring charges shall be divided equally Two-Way Local Interconnection Trunk groups until Teleconex establishes such IPs.

  • Traffic Measurement and Billing over Interconnection Trunks 6.1 For billing purposes, each Party shall pass Calling Party Number (CPN) information on at least ninety-five percent (95%) of calls carried over the Interconnection Trunks. 6.1.1 As used in this Section 6, “Traffic Rate” means the applicable Reciprocal Compensation Traffic rate, Measured Internet Traffic rate, intrastate Switched Exchange Access Service rate, interstate Switched Exchange Access Service rate, or intrastate/interstate Tandem Transit Traffic rate, as provided in the Pricing Attachment, an applicable Tariff, or, for Measured Internet Traffic, the FCC Internet Order. 6.1.2 If the originating Party passes CPN on ninety-five percent (95%) or more of its calls, the receiving Party shall ▇▇▇▇ the originating Party the Traffic Rate applicable to each relevant minute of traffic for which CPN is passed. For any remaining (up to 5%) calls without CPN information, the receiving Party shall ▇▇▇▇ the originating Party for such traffic at the Traffic Rate applicable to each relevant minute of traffic, in direct proportion to the minutes of use of calls passed with CPN information. 6.1.3 If the originating Party passes CPN on less than ninety-five percent (95%) of its calls and the originating Party chooses to combine Reciprocal Compensation Traffic and Toll Traffic on the same trunk group, the receiving Party shall ▇▇▇▇ the higher of its interstate Switched Exchange Access Service rates or its intrastate Switched Exchange Access Services rates for all traffic that is passed without CPN, unless the Parties agree that other rates should apply to such traffic. 6.2 At such time as a receiving Party has the capability, on an automated basis, to use such CPN to classify traffic delivered over Interconnection Trunks by the other Party by Traffic Rate type (e.g., Reciprocal Compensation Traffic/Measured Internet Traffic, intrastate Switched Exchange Access Service, interstate Switched Exchange Access Service, or intrastate/interstate Tandem Transit Traffic), such receiving Party shall ▇▇▇▇ the originating Party the Traffic Rate applicable to each relevant minute of traffic for which CPN is passed. If the receiving Party lacks the capability, on an automated basis, to use CPN information on an automated basis to classify traffic delivered by the other Party by Traffic Rate type, the originating Party will supply Traffic Factor 1 and Traffic Factor