Common use of Order Coordination and Order Coordination-Time Specific Clause in Contracts

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Lightyear’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Global Connection to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearGlobal Connection’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Global Connection to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearGlobal Connection’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Global Connection a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Global Connection may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Global Connection specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-OC- TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Granite to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearGranite’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Granite to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearGranite’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Granite a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Granite may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Granite specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Comm South to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearComm South’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Comm South to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearComm South’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Comm South a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Comm South may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Comm South specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Telepak Networks to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearTelepak Networks’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Telepak Networks to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearTelepak Networks’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Telepak Networks a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Telepak Networks may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Telepak Networks specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear CCI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearCCI’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear CCI to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearCCI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear CCI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear CCI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear CCI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-OC- TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear TCG to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearTCG’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear TCG to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearTCG’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear TCG a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear TCG may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear TCG specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear BSE to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearBSE’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear BSE to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearBSE’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear BSE a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear BSE may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear BSE specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “2.1.7.1 Order Coordination” Coordination (OC) allows BellSouth and Lightyear Symtelco to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearSymtelco’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “2.1.7.2 Order Coordination – Time Specific” Specific (OC-TS) allows Lightyear Symtelco to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearSymtelco’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Symtelco a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Symtelco may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Symtelco specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “2.1.7.1 Order Coordination” Coordination (OC) allows BellSouth and Lightyear EZ Phone to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearEZ Phone’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “2.1.7.2 Order Coordination – Time Specific” Specific (OC-TS) allows Lightyear EZ Phone to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearEZ Phone’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear EZ Phone a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear EZ Phone may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear EZ Phone specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Solution Telecom to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearSolution Telecom’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Solution Telecom to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearSolution Telecom’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Solution Telecom a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Solution Telecom may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Solution Telecom specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Azul Tel to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearAzul Tel’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Azul Tel to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearAzul Tel’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear Azul Tel a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Azul Tel may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Azul Tel specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear North Star Telecom to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearNorth Star Telecom’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear North Star Telecom to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearNorth Star Telecom’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear North Star Telecom a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear North Star Telecom may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear North Star Telecom specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Covista to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearCovista’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Covista to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearCovista’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Covista a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Covista may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Covista specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.5.1 “Order Coordination” (OC) allows BellSouth and Lightyear Comcast Phone to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearComcast Phone’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.5.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Comcast Phone to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearComcast Phone’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear Comcast Phone a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Comcast Phone may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Comcast Phone specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Access Point to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearAccess Point’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Access Point to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearAccess Point’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Access Point a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Access Point may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Access Point specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “2.1.7.1 Order Coordination” Coordination (OC) allows BellSouth and Lightyear ▇▇▇▇▇▇▇▇.▇▇▇ to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Lightyear▇▇▇▇▇▇▇▇.▇▇▇’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “2.1.7.2 Order Coordination – Time Specific” Specific (OC-TS) allows Lightyear ▇▇▇▇▇▇▇▇.▇▇▇ to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear▇▇▇▇▇▇▇▇.▇▇▇’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear ▇▇▇▇▇▇▇▇.▇▇▇ a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear ▇▇▇▇▇▇▇▇.▇▇▇ may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear ▇▇▇▇▇▇▇▇.▇▇▇ specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Preferred to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearPreferred’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Preferred to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearPreferred’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Preferred a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Preferred may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Preferred specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear DPI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearDPI’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear DPI to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearDPI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear DPI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear DPI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear DPI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-OC- TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear CCI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearCCI’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear CCI to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearCCI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear CCI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear CCI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear CCI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Ring Connection to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearRing Connection’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Ring Connection to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearRing Connection’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Ring Connection a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Ring Connection may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Ring Connection specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Ruddata to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearRuddata’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Ruddata to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearRuddata’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Ruddata a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Ruddata may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Ruddata specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear BAK to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearBAK’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear BAK to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear▇▇▇’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear BAK a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear BAK may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear BAK specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Dialogica to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearDialogica’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Dialogica to order a specific time for OC to take place. BellSouth ▇▇▇▇▇▇▇▇▇ will make every effort to accommodate LightyearDialogica’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear Dialogica a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Dialogica may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Dialogica specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear ▇▇▇.▇▇▇ to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Lightyear▇▇▇.▇▇▇’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear ▇▇▇.▇▇▇ to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear▇▇▇.▇▇▇’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear ▇▇▇.▇▇▇ a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear ▇▇▇.▇▇▇ may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear ▇▇▇.▇▇▇ specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “2.1.7.1 Order Coordination” Coordination (OC) allows BellSouth and Lightyear AmeriMex to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearAmeriMex’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “2.1.7.2 Order Coordination – Time Specific” Specific (OC-TS) allows Lightyear AmeriMex to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearAmeriMex’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear AmeriMex a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear AmeriMex may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear AmeriMex specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “2.1.7.1 Order Coordination” Coordination (OC) allows BellSouth and Lightyear TWTC to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearTWTC’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be negotiated by the Parties and scheduled at BellSouth’s discretion for completion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “2.1.7.2 Order Coordination – Time Specific” Specific (OC-TS) allows Lightyear TWTC to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearTWTC’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear TWTC a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear TWTC may specify a time between 9:00 a.m. and 4:00 p.m. (location timeCentral Time) Monday through Friday (excluding holidays). If Lightyear TWTC specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Vertex to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearVertex’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Vertex to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearVertex’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear Vertex a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Vertex may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Vertex specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Big River to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearBig River’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Big River to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearBig River’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Big River a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Big River may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Big River specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Seven Bridges to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearSeven Bridges’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Seven Bridges to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearSeven Bridges’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Seven Bridges a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Seven Bridges may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Seven Bridges specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. AMENDMENT EXHIBIT 1 Attachment 2 Page 9 Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear EZ Phone to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearEZ Phone’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear EZ Phone to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearEZ Phone’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear EZ Phone a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear EZ Phone may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear EZ Phone specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Money To Go to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearMoney To Go’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Money To Go to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearMoney To Go’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Money To Go a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Money To Go may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Money To Go specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear ConnectNow! to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearConnectNow!’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear ConnectNow! to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearConnectNow!’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear ConnectNow! a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear ConnectNow! may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear ConnectNow! specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Unity Acquisition to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearUnity Acquisition’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Unity Acquisition to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearUnity Acquisition’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Unity Acquisition a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Unity Acquisition may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Unity Acquisition specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear ACI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearACI’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear ACI to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearACI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear ACI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear ACI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear ACI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Navigator to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearNavigator’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Navigator to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearNavigator’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear Navigator a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Navigator may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Navigator specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear GSC to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearGSC’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear GSC to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearGSC’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear GSC a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear GSC may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear GSC specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear SPARDI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearSPARDI’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear SPARDI to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearSPARDI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear SPARDI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear SPARDI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear SPARDI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Lightning Communications to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearLightning Communications’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Lightning Communications to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearLightning Communications’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Lightning Communications a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Lightning Communications may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Lightning Communications specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear OnePoint Communications to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearOnePoint Communications’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear OnePoint Communications to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearOnePoint Communications’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear OnePoint Communications a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear OnePoint Communications may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear OnePoint Communications specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear DSL to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearDSL’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear DSL to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearDSL’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear DSL a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear DSL may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear DSL specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “2.1.7.1 Order Coordination” Coordination (OC) allows BellSouth and Lightyear Sail Networks to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearSail Networks’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “2.1.7.2 Order Coordination – Time Specific” Specific (OC-TS) allows Lightyear Sail Networks to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearSail Networks’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Sail Networks a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Sail Networks may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Sail Networks specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear CityNet to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearCityNet’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear CityNet to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearCityNet’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear CityNet a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear CityNet may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear CityNet specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear NOW to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearNOW’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear NOW to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearNOW’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear NOW a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear NOW may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear NOW specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear COMTECH21 to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearCOMTECH21’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear COMTECH21 to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearCOMTECH21’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear COMTECH21 a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear COMTECH21 may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear COMTECH21 specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear World Access to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearWorld Access’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear World Access to order a specific time for OC to take place. BellSouth ▇▇▇▇▇▇▇▇▇ will make every effort to accommodate LightyearWorld Access’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear World Access a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear World Access may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear World Access specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Nexus to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearNexus’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Nexus to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearNexus’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Nexus a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Nexus may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Nexus specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear ACN to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearACN’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear ACN to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearACN’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear ACN a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear ACN may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear ACN specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Telson to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearTelson’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Telson to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear’s ▇▇▇▇▇▇’▇ specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear ▇▇▇▇▇▇ a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Telson may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear ▇▇▇▇▇▇ specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Comm South to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearComm South’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Comm South to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearComm South’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Comm South a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Comm South may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Comm South specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear AmTel to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearAmTel’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear AmTel to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear▇▇▇▇▇’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear AmTel a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear AmTel may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear AmTel specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Triarch Marketing to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearTriarch Marketing’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Triarch Marketing to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearTriarch Marketing’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear Triarch Marketing a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Triarch Marketing may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Triarch Marketing specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Hotline to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearHotline’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Hotline to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearHotline’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Hotline a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Hotline may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Hotline specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear ▇▇▇▇ to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Lightyear’s ▇▇▇▇’▇ facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear ▇▇▇▇ to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear’s ▇▇▇▇’▇ specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear ▇▇▇▇ a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear ▇▇▇▇ may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear ▇▇▇▇ specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Conextel to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearConextel’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Conextel to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear▇▇▇▇▇▇▇▇’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear Conextel a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Conextel may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Conextel specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear VarTec to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearVarTec’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear VarTec to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearVarTec’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear VarTec a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear VarTec may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear VarTec specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in AMENDMENT EXHIBIT 1 Attachment 2 Page 9 the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “2.1.7.1 Order Coordination” Coordination (OC) allows BellSouth and Lightyear WorldxChange to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearWorldxChange’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “2.1.7.2 Order Coordination – Time Specific” Specific (OC-TS) allows Lightyear WorldxChange to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearWorldxChange’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear WorldxChange a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear WorldxChange may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear WorldxChange specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) LSR basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Tristar to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearTristar’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Tristar to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearTristar’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Tristar a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Tristar may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Tristar specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Knology to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearKnology’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Knology to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearKnology’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Knology a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Knology may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Knology specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear NTBS to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearNTBS’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear NTBS to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearNTBS’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear NTBS a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear NTBS may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear NTBS specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear AT&T to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearAT&T’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear AT&T to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearAT&T’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear AT&T a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear AT&T may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear AT&T specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Budget Phone to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearBudget Phone’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Budget Phone to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearBudget Phone’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Budget Phone a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Budget Phone may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Budget Phone specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear AirCover to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearAirCover’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear AirCover to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearAirCover’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear AirCover a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear AirCover may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear AirCover specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear International Telnet to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearInternational Telnet’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear International Telnet to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearInternational Telnet’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear International Telnet a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear International Telnet may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear International Telnet specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Quality Telephone to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearQuality Telephone’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Quality Telephone to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearQuality Telephone’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Quality Telephone a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Quality Telephone may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Quality Telephone specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear AT&T to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearAT&T’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear AT&T to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearAT&T’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear AT&T a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear AT&T may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear AT&T specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear EPICUS to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearEPICUS’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear EPICUS to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear▇▇▇▇▇▇’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear EPICUS a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear EPICUS may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear EPICUS specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear ICG to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearICG’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear ICG to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearICG’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear ICG a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear ICG may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear ICG specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear Southern Telcom to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearSouthern Telcom’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Southern Telcom to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearSouthern Telcom’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Southern Telcom a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Southern Telcom may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Southern Telcom specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-OC- TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear SPARDI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearSPARDI’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear SPARDI to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear▇▇▇▇▇▇’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Lightyear SPARDI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear SPARDI may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear SPARDI specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear TeleConex to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearTeleConex’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear TeleConex to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearTeleConex’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear TeleConex a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear TeleConex may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear TeleConex specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear FTS to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearFTS’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear FTS to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearFTS’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear FTS a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear FTS may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear FTS specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-OC- TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Lightyear Metro Teleconnect to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to LightyearMetro Teleconnect’s facilities to limit end user End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end userEnd User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear Metro Teleconnect to order a specific time for OC to take place. BellSouth will make every effort to accommodate LightyearMetro Teleconnect’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear Metro Teleconnect a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear Metro Teleconnect may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear Metro Teleconnect specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.