Common use of Order Coordination and Order Coordination-Time Specific Clause in Contracts

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Symtelco to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Symtelco’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Symtelco to order a specific time for OC to take place. BellSouth will make every effort to accommodate Symtelco’s specific conversion time request. However, BellSouth reserves the right to negotiate with Symtelco a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Symtelco may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Symtelco specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.10.1 “Order Coordination” (OC) allows BellSouth and Symtelco MCI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to SymtelcoMCI’s facilities to limit end user customer service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. customer OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.10.2 “Order Coordination – Time Specific” (OC-TS) allows Symtelco MCI to order a specific time for OC to take place. MCI may request a date and time for OC-TS. BellSouth will make every effort commercially reasonable efforts to accommodate SymtelcoMCI’s specific conversion time request. However, BellSouth reserves the right to negotiate with Symtelco MCI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Symtelco may specify If MCI specifies a time between outside of 9:00 a.m. and to 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Symtelco specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each stateworked. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Symtelco Speedy Reconnect to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to SymtelcoSpeedy Reconnect’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Symtelco Speedy Reconnect to order a specific time for OC to take place. BellSouth will make every effort to accommodate SymtelcoSpeedy Reconnect’s specific conversion time request. However, BellSouth reserves the right to negotiate with Symtelco Speedy Reconnect a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Symtelco Speedy Reconnect may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Symtelco Speedy Reconnect specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-OC- TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 2.1.10.1 “Order Coordination” (OC) allows BellSouth and Symtelco MCI to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to SymtelcoMCI’s facilities to limit end user customer service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. customer OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 2.1.10.2 “Order Coordination – Time Specific” (OC-TS) allows Symtelco MCI to order a specific time for OC to take place. MCI may request a date and time for OC-TS. BellSouth will make every effort commercially reasonable efforts to accommodate SymtelcoMCI’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Symtelco MCI a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Symtelco may specify If MCI specifies a time between outside of 9:00 a.m. and to 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Symtelco specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each stateworked. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Symtelco Globe to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to SymtelcoGlobe’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Symtelco Globe to order a specific time for OC to take place. BellSouth will make every effort to accommodate SymtelcoGlobe’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Symtelco Globe a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Symtelco Globe may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Symtelco Globe specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.