Common use of Order Coordination and Order Coordination-Time Specific Clause in Contracts

Order Coordination and Order Coordination-Time Specific. 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Freedom to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Freedom’s facilities to limit End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the End User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Freedom to order a specific time for OC to take place. BellSouth will make every effort to accommodate Freedom’s specific conversion time request. However, BellSouth reserves the right to negotiate with Freedom a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and is billed in addition to the OC charge. Freedom may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Freedom specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for Attachment 2 Page 9 an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Freedom Gateway to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to FreedomGateway’s facilities to limit End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the End User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Freedom Gateway to order a specific time for OC to take place. BellSouth will make every effort to accommodate FreedomGateway’s specific conversion time request. However, BellSouth reserves the right to negotiate with Freedom Gateway a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and is billed in addition to the OC charge. Freedom Gateway may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Freedom Gateway specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for Attachment 2 Page 9 an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Freedom Grande to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to FreedomGrande’s facilities to limit End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the End User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Freedom Grande to order a specific time for OC to take place. BellSouth will make every effort to accommodate Freedom▇▇▇▇▇▇’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Freedom Grande a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and is billed in addition to the OC charge. Freedom Grande may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Freedom Grande specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for Attachment 2 Page 9 an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.7.1 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Freedom Gateway to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to FreedomGateway’s facilities to limit End User end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the End Userend user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.7.2 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Freedom Gateway to order a specific time for OC to take place. BellSouth will make every effort to accommodate FreedomGateway’s specific conversion time request. However, BellSouth reserves the right to negotiate with Freedom Gateway a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Freedom Gateway may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Freedom Gateway specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for Attachment 2 Page 9 an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Freedom Nexus to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to FreedomNexus’s facilities to limit End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the End User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Freedom Nexus to order a specific time for OC to take place. BellSouth will make every effort to accommodate FreedomNexus’s specific conversion time request. However, BellSouth ▇▇▇▇▇▇▇▇▇ reserves the right to negotiate with Freedom Nexus a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and is billed in addition to the OC charge. Freedom Nexus may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Freedom Nexus specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for Attachment 2 Page 9 an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Order Coordination and Order Coordination-Time Specific. 2.1.7.1 “Order Coordination” (OC) allows BellSouth and Freedom Excel to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to FreedomExcel’s facilities to limit End User service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the End User. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.7.2 “Order Coordination – Time Specific” (OC-TS) allows Freedom Excel to order a specific time for OC to take place. BellSouth will make every effort to accommodate FreedomExcel’s specific conversion time request. However, BellSouth reserves the right to negotiate with Freedom Excel a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and is billed in addition to the OC charge. Freedom Excel may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Freedom Excel specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order AMENDMENT EXHIBIT 1 Attachment 2 Page 9 an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.