ORDERING EQUIPMENT AND REPORTS Clause Samples

ORDERING EQUIPMENT AND REPORTS. 8.1 One (1) Telxon hand held electronic order entry unit with a bar code scanning wand will be supplied to each Omnicare Facility at no charge upon such Omnicare Facility’s request. Additional Telxon units are available for Thirty-Five Dollars ($35.00) per month per Telxon. To accommodate annual physical inventories, a reasonable number of additional Telxon units will be loaned to Omnicare Facilities at no charge for a 3-week period, not to exceed four such requests per year. 8.2 As a replacement to the EconoLink system, McKesson Connect is offered to each Omnicare Facility at no charge and shall be subject to a separate license agreement between the parties governing use and maintenance. 8.3 MHS shall provide Omnicare Corporate Headquarters with access to McKesson Connect and corporate office management reporting. 8.4 MHS shall retain title to all hardware provided hereunder and Omnicare Facilities shall return same to MHS upon the earlier of termination of this Agreement or termination of such Omnicare Facility's use of MHS as Prime Vendor. 8.5 In the event MHS discontinues use of Telxon, EconoLink2000 system, Group EconoLink2000 system and/or McKesson Connect during the term of this Agreement, and replaces it with another service offering, MHS will make such replacement offering available to Omnicare Facilities at no charge.
View SourceView Similar (2)
ORDERING EQUIPMENT AND REPORTS. 8.1 One (1) Telxon hand held electronic order entry unit with a bar code scanning wand will be supplied to each Omnicare Facility at no charge upon such Omnicare Facility's request. Additional Telxon units are available for Thirty-Five Dollars ($35.00) per month per Telxon. To accommodate annual physical inventories, a reasonable number of additional Telxon units will be loaned to Omnicare Facilities at no charge for a 3-week period, not to exceed four such requests per year. 8.2 MHS will provide each Omnicare Facility one (1) EconoLink system (hardware and software) at no charge. Additional EconoLink systems (software and hardware) are available for One Hundred Fifty Dollars ($150.00) per month per system. 8.3 MHS shall provide Omnicare Corporate Headquarters with three (3) Group EconoLink2000 Group Reporting systems for IHN and corporate office management reporting. 8.4 MHS shall retain title to all hardware provided hereunder and Omnicare Facilities shall return same to MHS upon the earlier of termination of this Agreement or termination of such Omnicare Facility's use of MHS as Prime Vendor. 8.5 As an alternative to the EconoLink system, Supply Management Online is offered to each Omnicare Facility at no additional charge. 8.6 In the event MHS discontinues use of Telxon, EconoLink2000 system, Group EconoLink2000 system and/or Supply Management Online during the term of this Agreement, and replaces it with another service offering, MHS will make such replacement offering available to Omnicare Facilities at no additional charge.
View Source
ORDERING EQUIPMENT AND REPORTS 
View Source

Related to ORDERING EQUIPMENT AND REPORTS

  • All new supplies equipment and services shall include manufacturer's minimum standard warranty unless otherwise agreed to in writing. Vendor shall be legally permitted to sell all products offered for sale to TIPS Members. All goods proposed and sold shall be new unless clearly stated in writing. The Vendor shall provide timely and accurate customer support for orders to TIPS Members as agreed by the Parties. Vendors shall respond to such requests within a commercially reasonable time after receipt of the request. If support andƒor training is a line item sold or packaged with a sale, support shall be as agreed with the TIPS Member. Most TIPS Members are tax exempt and the related laws andƒor regulations of the controlling jurisdiction(s) of the TIPS Member shall apply. No assignment of Agreement may be made without the prior notification of TIPS. Written approval of TIPS shall not be unreasonably withheld. Payment for delivered goods and services can only be made to the awarded Vendor, Vendor designated reseller or vendor assigned company.

  • Metering Equipment 13.01. Utility will furnish, install, own and maintain metering equipment capable of measuring the flow of kilowatt-hours (kWh) of energy. The Customer's service associated with the CRG will be metered at a single metering point. The metering equipment will measure energy delivered by Utility to Customer and also measure energy delivered by Customer to Utility. Customer agrees to provide safe and reasonable access to the premises for installation of this equipment and its future maintenance or removal.

  • Testing of Metering Equipment Connecting Transmission Owner shall inspect and test all of its Metering Equipment upon installation and at least once every two (2) years thereafter. If requested to do so by NYISO or Developer, Connecting Transmission Owner shall, at Developer’s expense, inspect or test Metering Equipment more frequently than every two (2) years. Connecting Transmission Owner shall give reasonable notice of the time when any inspection or test shall take place, and Developer and NYISO may have representatives present at the test or inspection. If at any time Metering Equipment is found to be inaccurate or defective, it shall be adjusted, repaired or replaced at Developer’s expense, in order to provide accurate metering, unless the inaccuracy or defect is due to Connecting Transmission Owner’s failure to maintain, then Connecting Transmission Owner shall pay. If Metering Equipment fails to register, or if the measurement made by Metering Equipment during a test varies by more than two percent from the measurement made by the standard meter used in the test, Connecting Transmission Owner shall adjust the measurements by correcting all measurements for the period during which Metering Equipment was in error by using Developer’s check meters, if installed. If no such check meters are installed or if the period cannot be reasonably ascertained, the adjustment shall be for the period immediately preceding the test of the Metering Equipment equal to one-half the time from the date of the last previous test of the Metering Equipment. The NYISO shall reserve the right to review all associated metering equipment installation on the Developer’s or Connecting Transmission Owner’s property at any time.

  • Plant and Equipment The plants, structures and equipment of the Company are structurally sound with no known defects and are in good operating condition and repair and are adequate for the uses to which they are being put; and none of such plants, structures or equipment are in need of maintenance or repairs except for ordinary, routine maintenance and repairs which are not material in nature or cost. Except as set forth in Schedule 3.16, the Company has not received notification that it is in violation of any applicable building, zoning, anti-pollution, health or other law, ordinance or regulation in respect of its plants or structures or their operations and no such violation exists.

  • Equipment and Facilities For On-Site Courses, you will supply the facility and equipment as set forth at ▇▇▇.▇▇▇▇▇▇.▇▇▇/▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇. If Red Hat agrees to provide the training facilities and hardware, you will be liable for any loss or destruction of this equipment and hardware used in connection with the Training.