Common use of Parameter Description Clause in Contracts

Parameter Description. method add-server type Indicates a stream type. 0: RTMP 1: Twitch 2: YouTube 3: Facebook 100: RTSP 120: SRT Caller 121: SRT Listener 130: NDI HX 131: HLS 132: TS over UDP 133: TS over RTP 140: TVU ISSP name Indicates a session name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces ._-+'[](), and cannot start or end with space. RTMP streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates streaming destination address. key Indicates stream key. is-auth Indicates authentication status. 0: authentication is not required 1: authentication is required. Both username and password are mandatory. user Indicates user name. passwd Indicates password. token Indicates Token. event-data Indicates streaming event. net-mode Indicates the network priority. 0: Mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 RTSP streaming settings port Indicates port number, the default port is 554. max-connection Indicates number of clients for each RTSP stream. is-auth Indicates authentication status. 0: authentication is not required 1: authentication is required. Both username and password are mandatory. user Indicates user name. passwd Indicates password. is-main Indicates whether to enable the main stream. 0: disable the main stream. 1: enable the main stream. main-stream-name Indicates the main stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. is-sub Indicates whether to enable the sub stream. 0: disable the sub stream. 1: enable the sub stream. sub-stream-name Indicates the sub stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end withe spaces. is-audio Indicates whether to enable audio. 0: disable audio. 1: enable audio. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 SRT Caller streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates destination address. port Indicates port number. latency Indicates delay time. You can obtain its range by using get-info. bandwidth Indicates the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. stream-id Optional mtu Maximum transport unit ranges from 232 to 1500. conn-timeout Connect timeout in milliseconds. retry-duration Waiting time for reconnection in milliseconds. net-mode Indicates network priority. 0: mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 SRT Listener streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream port Indicates service port number. The default port is 8000. max-connection Indicates max client number. latency Indicates delay time. You can obtain its range by using get-info. bandwidth the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. mtu Maximum transmission unit ranges from 232 to 1500. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 NDI HX streaming settings source-name By default, it is the same as serial number. group-name Indicates the Group name which the source belongs to. By default, it is public. enable-discovery Whether to enable discovery server. discovery-server Indicates the IP address of discovery server. transport-mode The parameter is required when transporting via multicast. Obtain transport mode related parameters using get-info. mcast-addr Multicast address mcast-mask Multicast mask mcast-ttl Time to live for multicast ranges from 1 to 255. enable-fail-over Whether to enable fail over. fail-over-ndi-name Indicates the backup NDI channel name. fail-over-ip-addr Indicates the backup NDI channel IP address. enable-web-control Whether to allow to open the Web UI by clicking the gear icon in the NDI Studio Monitor application. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 HLS streaming settings stream-index Streams. 0: main stream 1: sub stream stream-name Indicates the main stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 TS over UDP/RTP streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates the destination address. port Indicates the stream port net-mode Indicates the network priority. 0: Mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 TVU ISSP streaming settings port Indicates the stream port. 6539 by default. stream-index Indicates the stream type. 0: main stream 1: sub stream audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 { "result": 0 } result 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. enable-server‌ Use this interface to turn on the stream session. By default, the newly added session is disabled. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇▇▇▇-▇▇▇▇▇▇&▇▇=▇&▇▇-▇▇▇=▇ method enable-server id Indicates the server ID, obtaining using get-settings. is-use 0: disable the server. 1: enable the server. { "result": 0 } Item Description result Returned status. 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. set-server‌ Use this interface to modify stream servers. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇-▇▇▇▇▇▇&▇▇=▇▇▇&▇▇▇▇=▇▇▇&▇▇▇=▇▇▇&▇▇▇=▇▇▇&...

Parameter Description. method addset-server id Indicates server ID, obtaining using get-settings.. type Indicates a stream server type. 0: RTMP 1: Twitch 2: YouTube 3: Facebook 100: RTSP 120: SRT Caller 121: SRT Listener 130: NDI HX 131: HLS 132: TS over UDP 133: TS over RTP 140: TVU ISSP name Indicates a session server name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces spaces, and special characters ._-+'[](), and can. The name should not start or end with spacespaces. RTMP streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates streaming destination server address. key Indicates stream key. is-auth Indicates whether authentication statusis required. 0: authentication is not required required. 1: authentication is required. Both username and password are mandatory. user Indicates user name. passwd Indicates password. token Indicates Token. event-data Indicates streaming event. net-mode Indicates the network priority. 0: Mobile broadband network first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 RTSP streaming settings port Indicates port number, the default port is 554. max-connection Indicates number of clients for each RTSP stream. is-auth Indicates authentication status. 0: authentication is not required 1: authentication is required. Both username and password are mandatory. user Indicates user name. passwd Indicates password. is-main Indicates whether to enable the main code stream. 0: disable the main stream. 1: enable the main stream. main-stream-name Indicates the main code stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. is-sub Indicates whether to enable the sub code stream. 0: disable the sub stream. 1: enable the sub stream. sub-stream-name Indicates the sub code stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. is-audio Indicates whether to enable audio. 0: disable audio. 1: enable audio. SRT Caller streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates destination address. port Indicates port number. latency Indicates delay time. You can obtain its value range by using get-info. bandwidth Indicates the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its value range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. stream-id Optional net-mode Indicates network priority. 0: mobile broadband first 1: Ethernet first 2: Wi-Fi first SRT Listener streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream port Indicates service port number. The default port is 8000. max-connection Indicates max client number. latency Indicates delay time. You can obtain its value range by using get-info. bandwidth the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its value range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. NDI HX streaming settings source-name By default, it is serial number. group-name Indicates the Group name which the source belongs to. By default, it is public. enable-discovery Whether to enable discovery server. discovery-server Indicates the IP address of discovery server. enable-fail-over Whether to enable fail over. fail-over-ndi-name Indicates the backup NDI channel name. fail-over-ip-addr Indicates the backup NDI channel IP address. enable-web-contro Whether to allow to open the Web UI by clicking the gear icon in the NDI Studio Monitor application. HLS streaming settings is-main Whether to push streams over main stream. 0: disable 1: enable main-stream-name Indicates the main stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. is-sub Indicates whether Whether to enable the push streams over sub stream. stream 0: disable the sub stream. 1: enable the sub stream. sub-stream-name Indicates the sub stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end withe spaces. is-audio Indicates whether to enable audio. 0: disable audio. 1: enable audio. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 SRT Caller streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates destination address. port Indicates port number. latency Indicates delay time. You can obtain its range by using get-info. bandwidth Indicates the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. stream-id Optional mtu Maximum transport unit ranges from 232 to 1500. conn-timeout Connect timeout in milliseconds. retry-duration Waiting time for reconnection in milliseconds. net-mode Indicates network priority. 0: mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 SRT Listener streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream port Indicates service port number. The default port is 8000. max-connection Indicates max client number. latency Indicates delay time. You can obtain its range by using get-info. bandwidth the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. mtu Maximum transmission unit ranges from 232 to 1500. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 NDI HX streaming settings source-name By default, it is the same as serial number. group-name Indicates the Group name which the source belongs to. By default, it is public. enable-discovery Whether to enable discovery server. discovery-server Indicates the IP address of discovery server. transport-mode The parameter is required when transporting via multicast. Obtain transport mode related parameters using get-info. mcast-addr Multicast address mcast-mask Multicast mask mcast-ttl Time to live for multicast ranges from 1 to 255. enable-fail-over Whether to enable fail over. fail-over-ndi-name Indicates the backup NDI channel name. fail-over-ip-addr Indicates the backup NDI channel IP address. enable-web-control Whether to allow to open the Web UI by clicking the gear icon in the NDI Studio Monitor application. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 HLS streaming settings stream-index Streams. 0: main stream 1: sub stream stream-name Indicates the main stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 TS over UDP/RTP streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates the destination address. port Indicates the stream port net-mode Indicates the network priority. 0: Mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 TVU ISSP streaming settings port Indicates the stream port. 6539 by default. stream-index Indicates the stream type. 0: main stream 1: sub stream audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 { "result": 0 } result 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. enable-server‌ Use this interface to turn on the stream session. By default, the newly added session is disabled. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇▇▇▇-▇▇▇▇▇▇&▇▇=▇&▇▇-▇▇▇=▇ method enable-server id Indicates the server ID, obtaining using get-settings. is-use 0: disable the server. 1: enable the server. { "result": 0 } Item Description result Returned status. 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. setdel-server‌ Use this interface to modify delete stream serverssessions. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇-▇▇▇▇▇▇&▇▇=▇ method del-server id Indicates the server ID, obtaining using get-settings. { "result": 0 } Item Description result Returned status. 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. start-test-server‌ Use this interface to start a stream test. Only one stream can be tested each time. Call the stop-test-server to cancel the stream test manually if needed. The test will stop automatically at 20s. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇▇▇-▇▇▇▇-▇▇▇▇▇▇&▇▇▇▇=▇▇▇&▇▇▇=▇▇▇&▇▇▇=▇▇▇&...

Parameter Description. method add-server type Indicates a stream type. 0: RTMP 1: Twitch 2: YouTube 3: Facebook 100: RTSP 120: SRT Caller 121: SRT Listener 130: NDI HX 131: HLS 132: TS over UDP 133: TS over RTP 140: TVU ISSP name Indicates a session name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces ._-+'[](), and cannot start or end with space. RTMP streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates streaming destination address. key Indicates stream key. is-auth Indicates authentication status. 0: authentication is not required 1: authentication is required. Both username and password are mandatory. user Indicates user name. passwd Indicates password. token Indicates Token. event-data Indicates streaming event. net-mode Indicates the network priority. 0: Mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 RTSP streaming settings port Indicates port number, the default port is 554. max-connection Indicates number of clients for each RTSP stream. is-auth Indicates authentication status. 0: no authentication is not required 1: authentication is required. Both required with username and password are mandatory. user Indicates user name. Username passwd Indicates password. password is-main Indicates whether to enable the main stream. 0: disable the main stream. 1: enable the main stream. main-stream-name Indicates the main stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. is-sub Indicates whether to enable the sub stream. 0: disable the sub stream. 1: enable the sub stream. sub-stream-name Indicates the sub stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end withe spaces. is-audio Indicates whether to enable audio. 0: disable audio. 1: enable audio. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 SRT Caller streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates destination address. port Indicates port number. latency Indicates delay time. You can obtain its range by using get-info. bandwidth Indicates the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. stream-id Optional mtu Maximum transport unit ranges from 232 to 1500. conn-timeout Connect timeout in milliseconds. retry-duration Waiting time for reconnection in milliseconds. net-mode Indicates network priority. 0: mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 SRT Listener streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream port Indicates service port number. The default port is 8000. max-connection Indicates max client number. latency Indicates delay time. You can obtain its range by using get-info. bandwidth the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. mtu Maximum transmission transport unit ranges from 232 to 1500. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 NDI HX streaming settings source-name By default, it is the same as serial number. group-name Indicates the Group name which the source belongs to. By default, it is public. enable-discovery Whether to enable discovery server. discovery-server Indicates the IP address of discovery server. transport-mode transport mode. You can obtain parameters related using get-info. The parameter is required when transporting via multicast. Obtain transport mode related parameters using get-infofor multicast mode. mcast-addr Multicast address mcast-mask Multicast mask mcast-ttl Time Multicast time to live for multicast ranges from 1 to 255. enable-fail-over Whether to enable fail over. fail-over-ndi-name Indicates the backup NDI channel name. fail-over-ip-addr Indicates the backup NDI channel IP address. enable-web-control Whether to allow to open the Web UI by clicking the gear icon in the NDI Studio Monitor application. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 HLS streaming settings stream-index StreamsIndicates the stream type. 0: main stream 1: sub stream stream-name Indicates the main stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 TS over UDP/RTP streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates the destination address. port Indicates the stream port net-mode Indicates the network priority. 0: Mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 TVU ISSP streaming settings port Indicates the stream port. 6539 by default. stream-index Indicates the stream type. 0: main stream 1: sub stream audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 { "result": 0 } result 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. enable-server‌ Use this interface to turn on the stream session. By default, the newly added session is disabled. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇▇▇▇-▇▇▇▇▇▇&▇▇=▇&▇▇-▇▇▇=▇ method enable-server id Indicates the server ID, obtaining using get-settings. is-use 0: disable the server. 1: enable the server. { "result": 0 } Item Description result Returned status. 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. setdel-server‌ Use this interface to modify delete stream serverssessions. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇-▇▇▇▇▇▇&▇▇=▇ method del-server id Indicates the server ID, obtaining using get-settings. { "result": 0 } Item Description result Returned status. 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. start-test-server‌ Use this interface to start a stream test. Only one stream can be tested each time. Call the stop-test-server to cancel the stream test manually if needed. The test will stop automatically at 20s. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇▇▇-▇▇▇▇-▇▇▇▇▇▇&▇▇▇▇=▇▇▇&▇▇▇=▇▇▇&▇▇▇=▇▇▇&...

Parameter Description. method add-server type Indicates a stream type. 0: RTMP 1: Twitch 2: YouTube 3: Facebook 100: RTSP 120: SRT Caller 121: SRT Listener 130: NDI HX 131: HLS 132: TS over UDP 133: TS over RTP 140: TVU ISSP name Indicates a session name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces ._-+'[](), and cannot start or end with space. RTMP streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates streaming destination address. key Indicates stream key. is-auth Indicates authentication status. 0: authentication is not required 1: authentication is required. Both username and password are mandatory. user Indicates user name. passwd Indicates password. token Indicates Token. event-data Indicates streaming event. net-mode Indicates the network priority. 0: Mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 RTSP streaming settings port Indicates port number, the default port is 554. max-connection Indicates number of clients for each RTSP stream. is-auth Indicates authentication status. 0: no authentication is not required 1: authentication is required. Both required with username and password are mandatory. user Indicates user name. Username passwd Indicates password. password is-main Indicates whether to enable the main stream. 0: disable the main stream. 1: enable the main stream. main-stream-name Indicates the main stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. is-sub Indicates whether to enable the sub stream. 0: disable the sub stream. 1: enable the sub stream. sub-stream-name Indicates the sub stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end withe spaces. is-audio Indicates whether to enable audio. is-audio 0: disable audio. 1: enable audio. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 SRT Caller streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates destination address. port Indicates port number. latency Indicates delay time. You can obtain its value range by using get-info. bandwidth Indicates the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its value range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. stream-id Optional mtu Maximum transport unit ranges from 232 to 1500. conn-timeout Connect timeout in milliseconds. retry-duration Waiting time for reconnection in milliseconds. net-mode Indicates network priority. 0: mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 SRT Listener streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream port Indicates service port number. The default port is 8000. max-connection Indicates max client number. latency Indicates delay time. You can obtain its value range by using get-info. bandwidth the portion of the total bandwidth of a stream required for the exchange of SRT control and recovered packets. You can obtain its value range by using get-info. aes Indicates the stream encryption algorithm to ensure the data security. 0: no encryption 16: AES-128 24: AES-192 32: AES-256 ase-word Indicates passphrase. mtu Maximum transmission transport unit ranges from 232 to 1500. audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 NDI HX streaming settings source-name By default, it is the same as serial number. group-name Indicates the Group name which the source belongs to. By default, it is public. enable-discovery Whether to enable discovery server. discovery-server Indicates the IP address of discovery server. transport-mode transport mode. You can obtain parameters related using get-info. The parameter is required when transporting via multicast. Obtain transport mode related parameters using get-infofor multicast mode. mcast-addr Multicast address mcast-mask Multicast mask mcast-ttl Time Multicast time to live for multicast ranges from 1 to 255. enable-fail-over Whether to enable fail over. fail-over-ndi-name Indicates the backup NDI channel name. fail-over-ip-addr Indicates the backup NDI channel IP address. enable-web-control Whether to allow to open the Web UI by clicking the gear icon in the NDI Studio Monitor application. audio Audio streamsHLS streaming settings is-main Whether to push streams over main stream. 0: Stream 1 disable 1: Stream 2 2: Stream 3 3: Stream 4 HLS streaming settings streamenable main-index Streams. 0: main stream 1: sub stream stream-name Indicates the main stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end with spaces. audio Audio streams. is-sub Whether to push streams over sub stream 0: Stream 1 disable 1: Stream 2 2: Stream 3 3: Stream 4 enable sub-stream-name Indicates the sub stream name, ranging from 1 to 32 characters, consisting of A to Z, a to z, 0 to 9, spaces, and special characters ._-+'[](). The name should not start or end withe spaces. TS over UDP/RTP streaming settings stream-index Indicates the stream type. 0: main stream 1: sub stream url Indicates the destination address. port Indicates the stream port net-mode Indicates the network priority. 0: Mobile broadband first 1: Ethernet first 2: Wi-Fi first audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 TVU ISSP streaming settings port Indicates the stream port. 6539 by default. stream-index Indicates the stream type. 0: main stream 1: sub stream audio Audio streams. 0: Stream 1 1: Stream 2 2: Stream 3 3: Stream 4 { "result": 0 } result 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. enable-server‌ Use this interface to turn on the stream session. By default, the newly added session is disabled. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇▇▇▇-▇▇▇▇▇▇&▇▇=▇&▇▇-▇▇▇=▇ method enable-server id Indicates the server ID, obtaining using get-settings. is-use 0: disable the server. 1: enable the server. { "result": 0 } Item Description result Returned status. 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. setdel-server‌ Use this interface to modify delete stream serverssessions. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇-▇▇▇▇▇▇&▇▇=▇ method del-server id Indicates the server ID, obtaining using get-settings. { "result": 0 } Item Description result Returned status. 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. start-test-server‌ Use this interface to start a stream test. Only one stream can be tested each time. Call the stop-test-server to cancel the stream test manually if needed. The test will stop automatically at 20s. GET ▇▇▇▇://▇▇/▇▇▇▇▇?▇▇▇▇▇▇=▇▇▇▇▇-▇▇▇▇-▇▇▇▇▇▇&▇▇▇▇=▇▇▇&▇▇▇=▇▇▇&▇▇▇=▇▇▇&...