Common use of Physical File Characteristics Clause in Contracts

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ will be the responsibility of ▇▇▇▇▇▇▇. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ will be the responsibility of ▇▇▇▇▇▇▇. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ Wakul over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ ’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ Wakul for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ Wakul will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇Wakul. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ Wakul will be the responsibility of ▇▇▇▇▇▇▇Wakul. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ Wakul’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇Wakul.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ Access One over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ Access One’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ Access One for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ Access One will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ Access One will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇Access One. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ Access One will be the responsibility of ▇▇▇▇▇▇▇Access One. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ Access One’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇Access One.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ ALLTEL over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ ALLTEL’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ ALLTEL for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ ALLTEL will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ ALLTEL will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇ALLTEL. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ byALLTEL will be the responsibility of ▇▇▇▇▇▇▇ALLTEL. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ ALLTEL’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇ALLTEL.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ Annox over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ Annox’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ Annox for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ Annox will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ Annox will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇Annox. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ Annox will be the responsibility of ▇▇▇▇▇▇▇Annox. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ Annox’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇.Annox. Version 2Q01: 07/25/01

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ BSE over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ BSE’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ BSE for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ BSE will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ BSE will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇BSE. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ BSE will be the responsibility of ▇▇▇▇▇▇▇BSE. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ BSE’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇.BSE. Version 3Q00: 09/29/00

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ PowerNet over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ PowerNet’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ PowerNet for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ PowerNet will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ PowerNet will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇PowerNet. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ PowerNet will be the responsibility of ▇▇▇▇▇▇▇PowerNet. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ PowerNet’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇PowerNet.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ Birch over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ Birch for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇Birch. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ will be the responsibility of ▇▇▇▇▇▇▇. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ Birch’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇Birch.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ ZNC over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ ZNC’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ ZNC for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ ZNC will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ ZNC will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇ZNC. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ ZNC will be the responsibility of ▇▇▇▇▇▇▇ZNC. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ ZNC’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇.ZNC. Version 3Q00: 11/28/00

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ Push Button over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ Push Button’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ Push Button for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ Push Button will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ Push Button will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇Push Button. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ Push Button will be the responsibility of ▇▇▇▇▇▇▇Push Button. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ Push Button’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇.Push Button. Version 2Q01: 07/25/01

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ ’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇▇ . Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ will be the responsibility of ▇▇▇▇▇▇▇▇ . Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ ’s end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇.▇ . Version 3Q00: 11/28/00

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to ▇▇▇▇▇▇▇ Colmena over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among ▇▇▇▇▇▇▇’▇ Colmena's Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an withan LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and ▇▇▇▇▇▇▇ Colmena for the purpose of data transmission. Where a dedicated line is required, ▇▇▇▇▇▇▇ Colmena will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. ▇▇▇▇▇▇▇ Colmena will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to ▇▇▇▇▇▇▇Colmena. Additionally, all message toll charges associated with the use of the dial circuit by ▇▇▇▇▇▇▇ colmena will be the responsibility of ▇▇▇▇▇▇▇Colmena. Associated equipment on the BellSouth BelLSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on ▇▇▇▇▇▇▇’▇ Colmena's end for the purpose of data transmission will be the responsibility of ▇▇▇▇▇▇▇Colmena.