Common use of Physical File Characteristics Clause in Contracts

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA Digital’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital for the purpose of data transmission. Where a dedicated line is required, USA Digital will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA Digital. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital will be the responsibility of USA Digital. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA Digital’s end for the purpose of data transmission will be the responsibility of USA Digital.

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital Progressive over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalProgressive’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital Progressive for the purpose of data transmission. Where a dedicated line is required, USA Digital Progressive will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital Progressive will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalProgressive. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital Progressive will be the responsibility of USA DigitalProgressive. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA Digital’s Progressive end for the purpose of data transmission will be the responsibility of USA DigitalProgressive.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital Arrow over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalArrow’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital Arrow for the purpose of data transmission. Where a dedicated line is required, USA Digital Arrow will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital Arrow will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalArrow. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital Arrow will be the responsibility of USA DigitalArrow. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on USA DigitalArrow’s end for the purpose of data transmission will be the responsibility of USA DigitalArrow.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital Level 3 over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalLevel 3’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital Level 3 for the purpose of data transmission. Where a dedicated line is required, USA Digital Level 3 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital Level 3 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalLevel 3. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital Level 3 will be the responsibility of USA DigitalLevel 3. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA DigitalLevel 3’s end for the purpose of data transmission will be the responsibility of USA DigitalLevel 3.

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital Connect! over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalConnect!’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital Connect! for the purpose of data transmission. Where a dedicated line is required, USA Digital Connect! will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital Connect! will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalConnect!. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital Connect! will be the responsibility of USA DigitalConnect!. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA Digital’s Connect! end for the purpose of data transmission will be the responsibility of USA DigitalConnect!.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital NewSouth over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalNewSouth’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital NewSouth for the purpose of data transmission. Where a dedicated line is required, USA Digital NewSouth will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital NewSouth will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalNewSouth. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital NewSouth will be the responsibility of USA DigitalNewSouth. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA DigitalNewSouth’s end for the purpose of data transmission will be the responsibility of USA DigitalNewSouth.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital CI2 over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalCI2’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital CI2 for the purpose of data transmission. Where a dedicated line is required, USA Digital CI2 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital CI2 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalCI2. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital CI2 will be the responsibility of USA DigitalCI2. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on USA DigitalCI2’s end for the purpose of data transmission will be the responsibility of USA Digital.CI2. Version 3Q00: 11/28/00

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital New Access over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA Digital’s New Access’ Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital New Access for the purpose of data transmission. Where a dedicated line is required, USA Digital New Access will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital New Access will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalNew Access. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital New Access will be the responsibility of USA DigitalNew Access. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on USA Digital’s New Access’ end for the purpose of data transmission will be the responsibility of USA DigitalNew Access.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital Colmena over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalColmena’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital Colmena for the purpose of data transmission. Where a dedicated line is required, USA Digital Colmena will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital Colmena will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalColmena. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital Colmena will be the responsibility of USA DigitalColmena. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA DigitalColmena’s end for the purpose of data transmission will be the responsibility of USA DigitalColmena.

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital Premiere over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalPremiere’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital Premiere for the purpose of data transmission. Where a dedicated line is required, USA Digital Premiere will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital Premiere will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalPremiere. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital Premiere will be the responsibility of USA DigitalPremiere. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA Digital’s Premiere end for the purpose of data transmission will be the responsibility of USA DigitalPremiere.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital DV2 over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalDV2’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital DV2 for the purpose of data transmission. Where a dedicated line is required, USA Digital DV2 will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital DV2 will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalDV2. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital DV2 will be the responsibility of USA DigitalDV2. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA DigitalDV2’s end for the purpose of data transmission will be the responsibility of USA DigitalDV2.

Physical File Characteristics. 7.2.1 6.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital Intermedia over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalIntermedia’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 6.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital Intermedia for the purpose of data transmission. Where a dedicated line is required, USA Digital Intermedia will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital Intermedia will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalIntermedia. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital Intermedia will be the responsibility of USA DigitalIntermedia. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA Digital’s Intermedia end for the purpose of data transmission will be the responsibility of USA DigitalIntermedia.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital VVI over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalVVI’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital VVI for the purpose of data transmission. Where a dedicated line is required, USA Digital VVI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital VVI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalVVI. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital VVI will be the responsibility of USA DigitalVVI. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the partiesParties. All equipment, including modems and software, that is required on USA DigitalVVI’s end for the purpose of data transmission will be the responsibility of USA DigitalVVI.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital Preferred over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalPreferred’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital Preferred for the purpose of data transmission. Where a dedicated line is required, USA Digital Preferred will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital Preferred will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalPreferred. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital Preferred will be the responsibility of USA DigitalPreferred. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA DigitalPreferred’s end for the purpose of data transmission will be the responsibility of USA DigitalPreferred.

Physical File Characteristics. 7.2.1 The Enhanced Optional Daily Usage Feed will be distributed to USA Digital CCI over their existing Optional Daily Usage File (ODUF) feed. The EODUF messages will be intermingled among USA DigitalCCI’s Optional Daily Usage File (ODUF) messages. The EODUF will be a variable block format (2476) with an LRECL of 2472. The data on the EODUF will be in a non-compacted EMI format (175 byte format plus modules). It will be created on a daily basis (Monday through Friday except holidays). 7.2.2 Data circuits (private line or dial-up) may be required between BellSouth and USA Digital CCI for the purpose of data transmission. Where a dedicated line is required, USA Digital CCI will be responsible for ordering the circuit, overseeing its installation and coordinating the installation with BellSouth. USA Digital CCI will also be responsible for any charges associated with this line. Equipment required on the BellSouth end to attach the line to the mainframe computer and to transmit successfully ongoing will be negotiated on a case by case basis. Where a dial-up facility is required, dial circuits will be installed in the BellSouth data center by BellSouth and the associated charges assessed to USA DigitalCCI. Additionally, all message toll charges associated with the use of the dial circuit by USA Digital CCI will be the responsibility of USA DigitalCCI. Associated equipment on the BellSouth end, including a modem, will be negotiated on a case by case basis between the parties. All equipment, including modems and software, that is required on USA DigitalCCI’s end for the purpose of data transmission will be the responsibility of USA DigitalCCI.