Common use of Portable Traffic Control Devices Clause in Contracts

Portable Traffic Control Devices. The work consists of furnishing erecting, relocating, maintaining, and removing portable, temporary traffic control devices necessary for controlling traffic. Portable temporary traffic control devices shall include but not be limited to portable signs, non-metallic drums, barricades, cones, delineators, flaggers, pilot vehicles, and any other traffic control device not covered by any other Sections included in this Contract. Portable Signs - Reflective sheeting shall be used on all sign facing The reflective sheeting shall be enclosed lens (Engineers grade) sheeting and shall have a smooth, sealed outer surface which will display the same color both day and night. The reflective sheeting on each sign shall have a smooth appearance. The reflective sheeting shall be applied in a workmanlike manner so that there are no bubbles or wrinkles in the material. Non-Metallic Drums - The drums shall be made of plastic impact resistant material. The drums shall have a two-piece, breakaway design that will maintain its integrity upon impact. Upon impact the upper portion of the drum shall deform and breakaway from the base, minimizing damage to drums or vehicles. The base and ballast shall remain in position and vehicle shall easily pass over it.

Portable Traffic Control Devices. The work consists of furnishing erecting, relocating, maintaining, and removing portable, temporary traffic control devices necessary for controlling traffic. Portable temporary traffic control devices shall include but not be limited to portable signs, non-metallic drums, barricades, cones, delineators, flaggers, pilot vehicles, and any other traffic control device not covered by any other Sections included in this Contract. Portable Signs - Reflective sheeting shall be used on all sign facing The the reflective sheeting shall be enclosed lens (Engineers grade) sheeting and shall have a smooth, sealed outer surface which will display the same color both day and night. The reflective sheeting on each sign shall have a smooth appearance. The reflective sheeting shall be applied in a workmanlike manner so that there are no bubbles or wrinkles in the material. Non-Metallic Drums - The drums shall be made of plastic impact resistant material. The drums shall have a two-piece, breakaway design that will maintain its integrity upon impact. Upon impact the upper portion of the drum shall deform and breakaway from the base, minimizing damage to drums or vehicles. The base and ballast shall remain in position and vehicle shall easily pass over it.