Previously Distributed Covered Products Sample Clauses

The "Previously Distributed Covered Products" clause defines how products that were distributed before the effective date of an agreement are treated under its terms. Typically, this clause clarifies whether such products are subject to the new obligations, restrictions, or warranties set forth in the agreement, or if they are exempt. For example, it may specify that products already sold or shipped prior to the agreement are not affected by new requirements. The core function of this clause is to prevent retroactive application of new terms, ensuring fairness and certainty for both parties regarding products already in the market.
Previously Distributed Covered Products. 3.2.1 Customer Notification - No later than June 15, 2018, ▇▇▇▇▇▇▇▇ Home shall send a letter, electronic or otherwise (“Notification Letter”) to: (1) each retailer or distributor in California to which it, after January 1, 2017, supplied any Covered Product with Covered Packaging that failed to meet the Phthalate Free standard of Section 2.2, and (2) any other retailer or distributor in California that ▇▇▇▇▇▇▇▇ Home reasonably understands or believes has any inventory of Covered Products with Covered Packaging. The Notification Letter shall advise the recipient that Covered Packaging for Covered Product may contain DEHP, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. The Notification letter shall inform the recipient that all Covered Packaging must either have a label attached to the packaging or on a shelf sign proximate to the display of Covered Product expressly referring to the Covered Product, which label or sign contains one of the following warnings, before it is sold in the California market or to a California customer. The Notification Letter shall include a sheet of white background, adhesive stickers with one of the following warning statements in no less than Book Antiqua, point 9 font (or its equivalent):
View Source
Previously Distributed Covered Products. 3.2.1 As a material term of this Agreement, ▇. ▇▇▇▇▇ represents that, to the best of its knowledge, there are no non-Phthalate Free Covered Products currently in its inventory or with any of its California customers. Further, ▇. ▇▇▇▇▇ represents that a primary California customer for the Covered Products, Bed Bath & Beyond has informed it that, since December 2016, the following sign was posted in the departments in the stores where the Covered Products were/are offered for sale: birth defects or other reproductive harm. This packaging is not intended as a storage container. Please discard packaging after purchase. 3.2.2 Settling Defendant shall maintain records of compliance correspondence, inventory reports or other communication confirming compliance with § 3.2.1 for three (3) years from the Effective Date and shall produce copies of such records upon reasonable written request by ▇▇▇▇▇.
View Source
Previously Distributed Covered Products. 3.2.1 Customer Notification - No later than the Effective Date, Sunham shall send a letter, electronic or otherwise (“Notification Letter”) to (1) each retailer or distributor in California to which it, after January 1, 2015, supplied any Covered Product or product incorporating any Covered Product, and
View Source
Previously Distributed Covered Products. 3.2.1 Customer Notification - No later than the Effective Date, Travelon shall send a letter, electronic or otherwise (“Notification Letter”) to: (1) each California distributor or each retailer with a California retail outlet to which it, after July 1, 2018, supplied any Covered Product that was not either Phthalate Free or labelled with a warning compliant with Section 3.3. 1. The Notification Letter shall advise the recipient that the Covered Products can expose consumers to DEHP, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. The Notification letter shall inform the recipient that all Covered Products must either have a label attached to the packaging or on a shelf sign immediately proximate to the display of Covered Product expressly referring to the Covered Product, which label or sign contains one of the following warnings. The Notification Letter shall include a sheet of white background, adhesive stickers with one of the following warning statements in no less than Book Antiqua, point 9 font (or its equivalent): WARNING: This product can expose you to chemicals, including di(2-ethylhexyl)phthalate (DEHP), that are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇.▇▇▇; or WARNING: This product can expose you to di(2-ethylhexyl)phthalate (DEHP), a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇.▇▇▇; or, only for any Covered Products with the warning statement contained on the product, the product label, or the immediate packaging of the Covered Product itself, WARNING: Cancer and Reproductive Harm - ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇.▇▇▇ The Notification Letter shall be sent with return receipt requested. The Notification Letter shall request written confirmation from the recipient, within 15 days of receipt, that all such inventory for California sale has been, or will be, labelled with the warning language identified in this section. 3.2.2 Settling Defendant shall maintain records of compliance correspondence, inventory reports or other communication confirming compliance with § 3.2.1 for two (2) years from the Effective Date and shall produce copies of such records upon reasonable written request by Davia.
View Source
Previously Distributed Covered Products. The Parties agree that that no further notification to SEB, SEB customers, the Releasees or Downstream Releasees is required.
View Source
Previously Distributed Covered Products. 3.2.1 Customer Notification -– Geneva represents that it has utilized the below warnings on Covered Products since August 2018. Consequent to this prompt remedial warning usage, no additional retail customer notification is required. WARNING: The vinyl packaging for this product can expose you to chemicals, including di(2-ethylhexyl)phthalate, that are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇.▇▇▇ [This vinyl/PVC packaging is not intended as a storage container. Please discard packaging after purchase. PACKAGING MADE IN CHINA]; or WARNING: for the vinyl packaging in which this product is sold – Cancer and Reproductive Harm - ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇.▇▇▇
View Source
Previously Distributed Covered Products 
View SourceView Similar (4)

Related to Previously Distributed Covered Products

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). The UCL-D will be offered in two versions - Short and Long. 2.4.2.2 A short UCL-D (18,000 feet or less) is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 ohms of resistance. 2.4.2.3 The long UCL-D (beyond 18,000 feet) is provisioned as a dry copper twisted pair longer than 18,000 feet and may have up to 12,000 feet of bridged tap and up to 2800 ohms of resistance. 2.4.2.4 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Granite. 2.4.2.5 These loops are not intended to support any particular services and may be utilized by Granite to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.2.6 BellSouth will make available the following UCL-Ds:

  • Unbundled Sub-Loop Distribution Voice Grade (USLD-VG) is a copper sub- loop facility from the cross-box in the field up to and including the point of demarcation at the End User’s premises and may have load coils.

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (DAMLs), and may have up to 6,000 feet of bridged tap between the End User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For Loops less than 18,000 feet and with less than 1300 Ohms resistance, the Loop will provide a voice grade transmission channel suitable for Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Makeup (LMU) process is not required to order and provision the UCL-ND. However, CBX One-Stop can request LMU for which additional charges would apply. 2.4.3.3 For an additional charge, BellSouth also will make available Loop Testing so that CBX One-Stop may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit A of this Attachment. 2.4.3.4 UCL-ND Loops are not intended to support any particular service and may be utilized by CBX One-Stop to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. The UCL- ND will include a NID at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.3.5 OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. OC-TS does not apply to this product. 2.4.3.6 CBX One-Stop may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Freedom has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Freedom. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Freedom (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Freedom, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Freedom will then have the option of paying the one-time SC rates to place the Loop.

  • Reactive Power and Primary Frequency Response 9.6.1 Power Factor Design Criteria