Priority Products Clause Samples

The 'Priority Products' clause defines certain goods or services as having special importance or precedence within a contractual relationship. Typically, this clause identifies specific products that must be given preferential treatment in terms of production, delivery, or allocation, especially in situations where resources are limited or demand exceeds supply. For example, a supplier may be required to fulfill orders for these designated products before attending to other, non-priority items. The core function of this clause is to ensure that critical or high-value products receive the necessary attention and resources, thereby minimizing the risk of shortages or delays for items deemed essential by the parties.
POPULAR SAMPLE Copied 1 times
Priority Products. To better achieve the objectives of this Chapter, the Parties agree to define a list of priority products for export from the Pacific States to the EC Party and a list of priority products for trade among the Pacific States. These lists shall be contained in Annex III.A and III.B respectively, which shall be reviewed and may be modified by a decision of the Trade Committee as and when appropriate.
Priority Products. Purchaser agrees to purchase and receive the Base Quantities and Assigned Quantities to be delivered under this Agreement (a) in priority over and in preference to all other Products available to Purchaser that are not Priority Products; and (b) on at least a pari passu and non-discriminatory basis with other Priority Products.

Related to Priority Products

  • Third Party Products 12.1 Third-party products provided to you by NCR Voyix for use with your subscription to the Service are subject to any terms provided by their supplier, including but not limited to those terms and conditions set forth in the exhibits attached hereto. Third-party terms and conditions are subject to change at any time by the supplier, and you agree that your use of such third-party products and services is governed by such supplier’s terms and conditions. You hereby release NCR Voyix from any and all liability associated with any damages or claims arising out of or related to third-party products. UNLESS NCR ▇▇▇▇▇ SPECIFICALLY AGREES OTHERWISE IN WRITING, YOU ACKNOWLEDGE AND AGREE THAT SUCH THIRD-PARTY PRODUCTS ARE PROVIDED “AS-IS” WITHOUT A WARRANTY FROM NCR Voyix. ACCORDINGLY, NCR Voyix EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY NATURE WITH RESPECT TO ANY SUCH THIRD-PARTY PRODUCTS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD-PARTY RIGHTS. 12.2 Third-party products and services may be advertised or made available to you for purchase directly from their supplier by email or other electronic communications, including notifications made through the Service or the Account Portal. Any representations or warranties that may be provided in connection with any such third-party products or services are provided solely by their supplier. NCR Voyix will not be responsible for any of your dealings or interactions with any of those third-party suppliers.

  • Product Claims The parties acknowledge that NCR Voyix, not Apple, is responsible for addressing any claims you or any third party relating to the Software or your possession and/or use of the Software, including, but not limited to: (a) product liability claims; (b) any claim that the Software fails to conform to any applicable legal or regulatory requirement; and (c) claims arising under consumer protection or similar legislation.

  • Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.

  • Borrower Products Except as described on Schedule 5.11, no Intellectual Property owned by Borrower or Borrower Product has been or is subject to any actual or, to the knowledge of Borrower, threatened litigation, proceeding (including any proceeding in the United States Patent and Trademark Office or any corresponding foreign office or agency) or outstanding decree, order, judgment, settlement agreement or stipulation that restricts in any manner Borrower’s use, transfer or licensing thereof or that may affect the validity, use or enforceability thereof. There is no decree, order, judgment, agreement, stipulation, arbitral award or other provision entered into in connection with any litigation or proceeding that obligates Borrower to grant licenses or ownership interest in any future Intellectual Property related to the operation or conduct of the business of Borrower or Borrower Products. Borrower has not received any written notice or claim, or, to the knowledge of Borrower, oral notice or claim, challenging or questioning Borrower’s ownership in any Intellectual Property (or written notice of any claim challenging or questioning the ownership in any licensed Intellectual Property of the owner thereof) or suggesting that any third party has any claim of legal or beneficial ownership with respect thereto nor, to Borrower’s knowledge, is there a reasonable basis for any such claim. Neither Borrower’s use of its Intellectual Property nor the production and sale of Borrower Products infringes the Intellectual Property or other rights of others.

  • SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this paragraph. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product. B Bid Contents Bid Evaluation Bid Opening Bid Submission 12 29 7 8 D Default - Authorized User Definitions Disqualification for Past Performance Drawings 63 5 35 25 E Emergency Contracts Employees/Subcontractors/Agents Equivalent or Identical Bids Estimated/Specific Quantity Contracts Ethics Compliance Expenses Prior to Contract Execution Extraneous Terms 43 55 33 42 3 19 13 F Facsimile Submissions Freedom of Information Law 9 16 I Indemnification Indemnification Relating to Third Party Rights Independent Contractor Installation Insurance Interest on Late Payments International Bidding 74 75 68 52 77 64 6 L Late Bids Legal Compliance Limitation of Liability 11 73 76 New York State Office of General Services, as part of its responsibility, recognizes the need to promote the employment of minority group members and women and to ensure that certified minority and women-owned business enterprises have opportunities for maximum feasible participation in the performance of OGS contracts. In 2006, the State of New York commissioned a disparity study to evaluate whether minority and women-owned business enterprises had a full and fair opportunity to participate in state contracting. The findings of the study were published on April 29, 2010, under the title "The State of Minority and Women-Owned Business Enterprises: Evidence from New York" (“the Disparity Study”). The report found evidence of statistically significant disparities between the level of participation of minority and women-owned business enterprises in state procurement contracting versus the number of minority and women-owned business enterprises that were ready, willing and able to participate in state procurements. As a result of these findings, the Disparity Study made recommendations concerning the implementation and operation of the statewide certified minority and women-owned business enterprises program. By submission of a bid or proposal in response to this solicitation, the Offerer agrees with all of the terms and conditions of Appendix A including Clause 12 - Equal Employment Opportunities for Minorities and Women. The contractor is required to ensure that it and any subcontractors awarded a subcontract over $25,000 for the construction, demolition, replacement, major repair, renovation, planning or design of real property and improvements thereon (the "Work") except where the Work is for the beneficial use of the Contractor, shall undertake or continue programs to ensure that minority group members and women are afforded equal employment opportunities without discrimination because of race, creed, color, national origin, sex, age, disability or marital status. For these purposes, equal opportunity shall apply in the areas of recruitment, employment, job assignment, promotion, upgrading, demotion, transfer, layoff, termination, and rates of pay or other forms of compensation. This requirement does not apply to: (i) work, goods, or services unrelated to this contract; or (ii) employment outside New York State. Contractor further agrees to submit with the bid a staffing plan (Form EEO 100) identifying the anticipated work force to be utilized on the Contract and if awarded a contract, will, upon request, submit to OGS a workforce utilization report (Form EEO 101) identifying the work force actually utilized on the Contract if known. For purposes of this procurement, OGS hereby establishes a goal of 11% for Minority-owned Business Enterprises (MBE) participation and 9% for Women-owned Business Enterprises (WBE) participation (collectively referred to as MWBE), for a total contract MWBE goal of 20%. A Contractor must document good faith efforts to provide meaningful participation by MWBEs as subcontractors or suppliers in the performance of this Contract and Contractor agrees that OGS may withhold payment pending receipt of the required MWBE documentation. The directory of New York State Certified MWBEs can be viewed at: ▇▇▇▇://▇▇▇.▇▇▇.▇▇.▇▇▇/MWBE.html. For guidance on how OGS will determine a Contractor’s “good faith efforts,” refer to 5 NYCRR §142.8. In accordance with 5 NYCRR §142.13, Offeror/Contractor acknowledges that if it is found to have willfully and intentionally failed to comply with the MWBE participation goals set forth in the Contract, such finding constitutes a breach of Contract and OGS may withhold payment from the Contractor as liquidated damages. Such liquidated damages shall be calculated as an amount equaling the difference between: (1) all sums identified for payment to MWBEs had the Contractor achieved the contractual MWBE goals; and (2) all sums actually paid to MWBEs for work performed or materials supplied under the Contract. By submitting a bid or proposal, Offeror/Contractor agrees to submit the following documents and information as evidence of compliance with the foregoing: A. Offeror is required to submit a Utilization Plan on Form MWBE 100 with their bid or proposal. The Utilization Plan shall list the MWBEs the Contractor intends to use to perform the State contract and a description of the Contract scope of work that the Contractor intends to structure to meet the goals on the State contract, and the estimated or, if known, actual dollar amounts to be paid to and performance dates of each component of a State contract that the Contractor intends to be performed by a NYS Certified minority- or woman-owned business. Any modifications or changes to the agreed participation by NYS Certified M/WBEs after the Contract Award and during the term of the Contract must be reported on a revised M/WBE Utilization Plan and submitted to OGS. B. OGS will review the submitted MWBE Utilization Plan and advise the Offeror of OGS acceptance or issue a notice of deficiency within 20 days of receipt. C. If a notice of deficiency is issued, Offeror agrees that it shall respond to the notice of deficiency within seven (7) business days of receipt by submitting to the OGS Office of Minority and Women-Owned Enterprises, [35th Floor, ▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇ ▇▇▇▇▇ Phone: (▇▇▇) ▇▇▇-▇▇▇▇ Fax: (518) ▇▇▇- ▇▇▇▇], a written remedy in response to the notice of deficiency. If the written remedy that is submitted is not timely or is found by OGS to be inadequate, OGS shall notify the Offeror and direct the Offeror to submit, within five (5) business days, a request for a partial or total waiver of MWBE participation goals on Form MWBE101/BDC 333. Failure to file the waiver form in a timely manner may be grounds for disqualification of the bid or proposal. D. OGS may disqualify an Offeror as being non-responsive under the following circumstances: a) If an Offeror fails to submit a MWBE Utilization Plan; b) If an Offeror fails to submit a written remedy to a notice of deficiency; c) If an Offeror fails to submit a request for waiver; or d) If OGS determines that the Offeror has failed to document good faith efforts. An Offeror who documents good faith efforts to meet the goal requirements may submit a request for a partial or total waiver on form MWBE 101/BDC 333, at the same time it submits its MWBE Utilization Plan. If a request for waiver is submitted with the MWBE Utilization Plan and is not accepted by OGS at that time, the provisions of clauses B-D above, will apply. A Contractor shall attempt to utilize, in good faith, any MBE or WBE identified within its MWBE Utilization Plan, during the performance of the Contract. Requests for a partial or total waiver of established goal requirements made subsequent to Contract Award may be made at any time during the term of the Contract to OGS, but must be made no later than prior to the submission of a request for final payment on the Contract. A Contractor is required to submit a Contractor’s Monthly Compliance & Payment Report on Form MWBE 102 to the OGS Office of Minority and Women-Owned Enterprises, [35th Floor, ▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇ ▇▇▇▇▇ Phone: (▇▇▇) ▇▇▇-▇▇▇▇ Fax: (▇▇▇) ▇▇▇-▇▇▇▇], by the 10th day of each month during the term of the Contract documenting the progress made toward achievement of the MWBE goals of the Contract.