Product Quantity and Quality Clause Samples

POPULAR SAMPLE Copied 1 times
Product Quantity and Quality. THE SELLER GUARANTEES THAT EACH SHIPMENT OF RUSSIAN LIGHT CYCLE OIL (LCO)SHALL BE PROVIDED WITH AN INSPECTION CERTIFICATE OF QUALITY AND QUANTITY AT TIME OF LOADING AND SUCH CERTIFICATE SHALL BE PROVIDED AS FOLLOWS: PRE –INSPECTION OF THE PRODUCT SHALL BE CARRIED OUT BY SOCIETE GENERALE DE SURVEILLANCE (SGS) AT PORT OF LOADING AT SELLERS EXPENSE. SGS SHALL ISSUE AN INSPECTION CERTIFICATE OF QUALILTY AND QUANTITY TO CERTIFY THAT THE PRODUCTS ARE IN GOOD ORDER AND CONDITION AND CONFORM TO THE SPECIFICATIONS HEREIN STATED. THE BUYER OR HIS REPRESENATIVE MAY INSPECT THE GOODS AND WITNESS THE CARGO AT THE LOADING PORT AT HIS OWN COST AND SHOULD NOT HAVE ANY AUTHORIZATION IN NEGOTATION OF THE SAID DOCUMENTS. THE SELLER SHALL INSTRUCT THE SAID AUTHORITY TO CARRY OUT THE INSPECTION IN STRICT ACCORDANCE WITH THE INTERNATIONAL CHAMBER OF COMMERCE (I.C.C.) RULES THE BUYER AT HIS OWN EXPENSE SHALL PROVIDE ADDITIONAL INSPECTION AT PORT OF DESTINATION TO CONFIRM LOADING SINGLE BULK VESSEL AND QUANTITY& QUALITY. IF DISCREPANCIES SHOULD AT ANY TIME AND IN PARTICULAR CASE RESULT IN RELATION TO THE INSPECTION CERTIFICATE(S) ISSUED AT THE PORT OF LOADING AND DESTINATION, IT IS HEREBY AGREED THAT ARBITRATION SHALL BE EMPLOYED TO DETERMINE THE APPROPRIATE JUDGEMENT. BOTH PARTIES AGREE TO BE BOUND BY THE ARBITRATOR S DECISION FOR OR AGAINST EITHER BUYER OR SELLER.
View SourceView Similar (4)
Product Quantity and Quality. During the effective term of this Contract, the Seller undertakes to sell and the Buyer undertakes to buy 100% of copper Product for the years 2025, 2026 and 2027 estimated to be between [***] and [***] DMT per year, which shall comply with the following quality according to its contents: Cu: [***] % Ag: [***] gms/dmt Au: [***] gms/dmt Fe: [***] % S: [***] % As: [***] % Sb: [***] % Zn: [***] % Pb: [***] % Bi: [***] % Hg: [***] ppm Cd: [***] % Al2O3: [***] % Cl: [***] ppm CaO: [***] % F: [***] ppm MgO: [***] % Na: [***] % Ni: [***] % Se: [***] ppm SiO2: [***] % Te: [***] ppm H2O: [***] % Classified as: PRIVATE & CONFIDENTIAL The Product shall be primary, of fresh production, free flowing in nature with no visible agglomerations or discoloration and shall be homogeneous in nature and assays in the sole opinion of the Buyer’s appointed independent surveyor. The Seller guarantees that the Concentrate shall otherwise be free from radioactivity and deleterious impurities harmful to smelting and/or refining processes, including but not limited to any contain run-of-mine ore (ROM), any residuals of pellets or any other form of agglomerated material or its residuals. Notwithstanding any other provision in this Contract, the Seller guarantees to the Buyer that the cargo to be supplied and/or delivered under this Contract shall not include any slag, ash, residues, pyritic ash, pyritic cinder, pyritic slag, sulphuric cinder, sulphuric slag, calcium sulphate, roasted pyrites, roasted iron pyrites, mill scale, pellet chips, smelting, pig iron or ferrous waste product or by-product whatsoever (the “Guarantee”). In addition, the Seller agrees to indemnify and to hold the Buyer harmless in respect of any and all loss or damage howsoever caused by, or arising out of or in relation to, any breach of the Seller of the Guarantee. Seller shall clean and/or remove any other foreign objects, including but not limited to gypsum, pieces of paper, tarpaulin, steel, wood, plastic sheets, coal, stones, etc., from the cargo prior to delivery. In the event that discharge of the cargo at the intended discharge port and/or place is delayed or prevented as a result of the presence of such other foreign objects, Seller shall be liable to the Buyer for any costs, losses or liabilities howsoever caused by, or arising out of or in relation to such delay or prevention. In the event that unloading of Product at Buyer's designated warehouse is delayed or prevented as a result of the presence of s...
View SourceView Similar (2)
Product Quantity and Quality. 3.1 Seller agrees to sell and deliver Gold Metal (Au) to the Buyer under the Terms of this Agreement and as to the quantity and quality as herein referenced. The Seller will provide, at the same time, a viable Proof of the Product in respect to its goods, complying with the specifications described in the Agreement.
View Source
Product Quantity and Quality. Pursuant to a Statement of Work, Just shall perform Services in accordance with the Standards to Process and deliver to Client, or to a designated recipient of Client, the quantity and quality of Deliverables as specified in a Statement of Work. The Parties acknowledge and agree that the quantity of Product Processed pursuant to a Statement of Work is not guaranteed and may be within plus or minus [***] percent ([***]%) of the quantity to be delivered pursuant to such Statement of Work. As used in this Agreement, the term “by Client” shall mean “by or on behalf of Client”.
View Source
Product Quantity and Quality 
View SourceView Similar (6)

Related to Product Quantity and Quality

  • STANDARDS AND QUALITY The Supplier shall at all times during the Contract Period ensure that the Services are delivered in accordance with: the Digital Service Design Manual (and the Supplier shall comply with the processes and procedures set out therein); the Standards; the KPIs; the Methodology; the applicable SOW; and all other applicable provisions of this Contract.

  • Product Quality Isoprene, (hereinafter referred to as “Product”) supplied and maintained on consignment at Belpre in accordance with Article 6, and will be in accordance with specifications set forth in Exhibit A. Seller will facsimile to the Buyer at time of shipment a Certificate of Analysis (COA). Seller will provide Buyer six (6) months advanced notification if there is a change in the manufacturing process that will affect the material specifications of Product provided to the Buyer. Product produced by the Seller in different plants is viewed as coming from different supply sources and requires separate qualifications. Product to be shipped for the Seller from third parties must be from a third party qualified by the Buyer based on Buyer’s criteria as specified in Exhibit B. Buyer will have the right to confirm each such shipment-conforms to the agreed specification; Seller must obtain approval prior to shipment any material that does not meet the Buyers specifications. If Seller deliveries Product failing to comply with the specifications set out in Exhibit A, Seller will reimburse Buyer for freight expenses associated with such shipment and be entitled at its option to i) require Seller to replace such defective Product at a price not to exceed the invoice value or ii) to reimburse the invoice value of the defective Product. If, Buyer has cause to complain that the quality of Product delivered to it pursuant to the Contract does not comply with the specification set out in Exhibit A, Buyer will give written notice specifying the nature of its complaint and the parties will promptly meet so as to resolve that complaint. In absence of any agreement to resolve the complaint the parties will appoint at their joint cost a mutually acceptable independent surveyor to examine whether the quality of Product as delivered complied with the specifications set forth in Exhibit A. In the absence of any written notice from Buyer to Seller within 30 days after delivery of the Product, the Product shall be deemed to have been delivered and accepted by Buyer in a satisfactory condition and in all respects in accordance with the specifications and Seller shall have no liability to Buyer with respect to that delivery.

  • ESTIMATED QUANTITIES 1.1 The quantities set forth in the line items and specification document are approximate and represent the estimated requirements for the contract period. 1.2 Items listed may or may not be an inclusive requirements for this category. 1.3 Category items not listed, but distributed by bidder are to be referred to as kindred items. Kindred items shall receive the same percentage of discount or pricing structure as items listed in the specification document. 1.4 The unit prices and the extended total prices shall be used as a basis for the evaluation of bids. The actual quantity of materials necessary may be more or less than the estimates listed in the specification document, but the City/County shall be neither obligated nor limited to any specified amount. If possible, the Owners will restrict increases/decreases to 20% of the estimated quantities listed in the specification document.

  • Contract Quantity The Contract Quantity during each Contract Year is the amount set forth in the applicable Contract Year in Section D of the Cover Sheet (“Delivery Term Contract Quantity Schedule”), which amount is inclusive of outages.

  • Number and Qualification Prior to a public offering of Shares there may be a sole Trustee. Thereafter, the number of Trustees shall be determined by a written instrument signed by a majority of the Trustees then in office, provided that the number of Trustees shall be no less than two or more than nine. No reduction in the number of Trustees shall have the effect of removing any Trustee from office prior to the expiration of his term. An individual nominated as a Trustee shall be at least 21 years of age and not older than 80 years of age at the time of nomination and not under legal disability. Trustees need not own Shares and may succeed themselves in office.