Products and Specifications Sample Clauses

Products and Specifications. Buyer shall purchase from Supplier the products listed in Exhibit A attached hereto and incorporated herein by reference (as such list may be amended by mutual written agreement of the parties from time to time, the “Products”), as reflected in purchase orders or EDI orders submitted from time to time in accordance with the provisions of this Agreement. In connection with manufacturing and packaging the Products purchased hereunder, Supplier shall comply in all material respects with the specifications for such Products in use by Buyer as of the date hereof (as such specifications may be amended by mutual written agreement of the parties from time to time, the “Specifications”). Each particular Product may be processed and manufactured at (i) the specific Supplier facilities identified on Exhibit A (the “Original Facilities”) or (ii) any other Supplier facilities specified by Supplier (the “Discretionary Facilities”); provided, that in the case of clause (ii), (A) any Discretionary Facility must be qualified to at least the level of the prior Original Facility prior to any Products being produced at the Discretionary Facility and (B) the price for any Products being produced at a Discretionary Facility will remain FOB the Original Facility, and Supplier shall be responsible for all incremental costs (including freight) arising from the movement of Product manufacturing from an Original Facility to a Discretionary Facility. Notwithstanding the foregoing, for any Products produced by Supplier at one facility that are, at Buyer’s request, picked up by Buyer’s employees, agents, representatives or carriers at a different Supplier facility (collectively, “Resupply Products”), Supplier shall arrange and pass through to Buyer the actual costs of all freight relating to the shipment of Resupply Products from the Supplier producing facility to the Supplier receiving facility.
View SourceView Similar (8)
Products and Specifications. The Products and Specifications are those set out in the Exhibit(s) to this Schedule C. US Borax, Inc. Products and Specifications- The Products consist of the following:
View SourceView Similar (2)
Products and Specifications. Buyer shall purchase from Supplier the products specified in writing and mutually agreed which shall be subsequently incorporated herein by reference (as such may be amended by mutual written agreement of the parties from time to time, the "Products"), as reflected in purchase orders submitted from time to time in accordance with the provisions of this Agreement. In connection with manufacturing and packaging of the Products purchased hereunder, Supplier shall comply in all material respects with the specifications for such Products for use by Buyer (as such specifications may be amended by mutual written agreement of the parties from time to time, the "Specifications").
View Source
Products and Specifications. (Omitted) shall purchase from Nanochem on a non-exclusive basis, and Nanochem shall manufacture and sell to (Omitted), the Products specified in Schedule 1 pursuant to (i) the terms and conditions set out in this Agreement, (ii) subject to the pricing, quantity, delivery scheduling and other business terms set out in Exhibit A; and (iii) in accordance with the Specifications set forth in Exhibit B. Any Product Revision (as defined below) shall be subject to the provisions of Section 11.5 hereof. A “Product Revision” shall mean any change to the Specifications and/or of a Product’s formulation, pack size or configuration or package construction or design. (Omitted) will pay for any obsolete packaging or ingredients resulting from a Product Revision or any changes to the label or artwork used on a Product to the extent provided in Section 11.5.
View Source
Products and Specifications. 3.1 Xxxx agrees to manufacture the following product for Xxxx: a) Xxxx xxxx battery case 3.2 The components and description of the above product are vividly stated in Exhibit-A of this Agreement.
View Source
Products and Specifications. 2.1 Manufacturer shall fabricate the Products listed in Annex 1 ("Products") according to the models, drawings, specifications, and technical requirements specified therein ("Specifications").
View Source
Products and Specifications. Ready-to-drink Mule: Specifications to be determined by the Development Committee
View Source

Related to Products and Specifications

  • Drawings and Specifications 9.1 A complete list of all Drawings that form a part of the Contract Documents are to be found as an index on the Drawings themselves, and/or may be provided to Developer and/or in the Table of Contents. 9.2 Materials or Work described in words that so applied have a well-known technical or trade meaning shall be deemed to refer to recognized standards, unless noted otherwise. 9.3 Trade Name or Trade Term It is not the intention of the Contract Documents to go into detailed descriptions of any materials and/or methods commonly known to the trade under “trade name” or “trade term.” The mere mention or notation of “trade name” or “trade term” shall be considered a sufficient notice to Developer that it will be required to complete the work so named, complete, finished, and operable, with all its appurtenances, according to the best practices of the trade. 9.4 The naming of any material and/or equipment shall mean furnishing and installing of same, including all incidental and accessory items thereto and/or labor therefor, as per best practices of the trade(s) involved, unless specifically noted otherwise. 9.5 Contract Documents are complementary, and what is called for by one shall be binding as if called for by all. As such, Drawings and Specifications are intended to be fully cooperative and to agree. However, if Developer observes that Drawings and Specifications are in conflict with the Contract Documents, Developer shall promptly notify District and Architect in writing, and any necessary changes shall be made as provided in the Contract Documents. 9.6 Figured dimensions shall be followed in preference to scaled dimensions, and Developer shall make all additional measurements necessary for the work and shall be responsible for their accuracy. Before ordering any material or doing any work, each Developer shall verify all measurements at the building and shall be responsible for the correctness of same. 9.7 Should any question arise concerning the intent or meaning of the Contract Documents, including the Plans and Specifications, the question shall be submitted to the District for interpretation. If a conflict exists in the Contract Documents, these Construction Provisions shall control over the Facilities Lease, which shall control over the Site Lease, which shall control over Division 1 Documents, which shall control over Division 2 through Division 49 documents, which shall control over figured dimensions, which shall control over large-scale drawings, which shall control over small-scale drawings. In no case shall a document calling for lower quality and/or quantity of material or workmanship control. However, in the case of discrepancy or ambiguity solely between and among the Drawings and Specifications, the discrepancy or ambiguity shall be resolved in favor of the interpretation that will provide District with the functionally complete and operable Project described in the Drawings and Specifications. 9.8 Drawings and Specifications are intended to comply with all laws, ordinances, rules, and regulations of constituted authorities having jurisdiction, and where referred to in the Contract Documents, the laws, ordinances, rules, and regulations shall be considered as a part of the Contract Documents within the limits specified. 9.9 As required by Section 4-317(c), Part 1, Title 24, CCR: “Should any existing conditions such as deterioration or non-complying construction be discovered which is not covered by the DSA-approved documents wherein the finished work will not comply with Title 24, California Code of Regulations, a construction change document, or a separate set of plans and specifications, detailing and specifying the required repair work shall be submitted to and approved by DSA before proceeding with the repair work.”

  • Plans and Specifications After Landlord receives and approves Tenant’s Space Plan as provided above, Tenant will cause Tenant’s Architect to prepare the Plans and Specifications for the Tenant Improvements. Landlord will approve or disapprove (specifically describing any reasons for disapproval) the Plans and Specifications in writing within ten (10) Business Days after receiving them. If Landlord disapproves the Plans and Specifications, Tenant will provide appropriately revised Plans and Specifications to Landlord for approval (or disapproval) within five (5) Business Days on the same basis as set forth above. After Landlord’s approval, Tenant will submit the Plans and Specifications for permits and construction bids. No deviation from the Building Standard will be permitted in the Space Plan or the Plans and Specifications, provided reasonable deviations with respect to the ceiling, lighting, painting, flooring and wall covering may be permitted with Landlord’s approval. Landlord will not approve any deviations which Landlord believes (a) do not conform to applicable codes, ordinances and other Laws or are disapproved by any governmental agency, (b) require services beyond the level normally provided to other tenants in the Building, or (c) are of a nature or quality that are inconsistent with Landlord’s overall plan or objectives for the Building. No approval by Landlord of any deviation constitutes an acknowledgment by Landlord that such deviations are in conformance with applicable codes, ordinances and other Laws. In the event that Landlord’s approval shall be required in this Tenant Improvements Agreement, then notwithstanding anything to the contrary set forth in the Lease, Landlord’s approval shall not be unreasonably withheld, conditioned, or delayed.

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • Specifications Where applicable, specifications for Goods and/or Services are detailed in this Contract and the Purchase Order. Unless otherwise specified in the Purchase Order, all Goods and/or Services provided shall be new and unused of the latest model or design.

  • Technical Specifications The purpose of the Technical Specifications (TS), is to define the technical characteristics of the Goods and Related Services required by the Procuring Entity. The Procuring Entity shall prepare the detailed TS consider that: